Kubernetes Cluster API

Cluster API is a Kubernetes sub-project focused on providing declarative APIs and tooling to simplify provisioning, upgrading, and operating multiple Kubernetes clusters.

Started by the Kubernetes Special Interest Group (SIG) Cluster Lifecycle, the Cluster API project uses Kubernetes-style APIs and patterns to automate cluster lifecycle management for platform operators. The supporting infrastructure, like virtual machines, networks, load balancers, and VPCs, as well as the Kubernetes cluster configuration are all defined in the same way that application developers operate deploying and managing their workloads. This enables consistent and repeatable cluster deployments across a wide variety of infrastructure environments.

⚠️ Breaking Changes ⚠️

Getting started

• Quick Start
• Concepts
• Developer guide
• Contributing
• Videos explaining Cluster API architecture

Why build Cluster API?

Kubernetes is a complex system that relies on several components being configured correctly to have a working cluster. Recognizing this as a potential stumbling block for users, the community focused on simplifying the bootstrapping process. Today, over 100 Kubernetes distributions and installers have been created, each with different default configurations for clusters and supported infrastructure providers. SIG Cluster Lifecycle saw a need for a single tool to address a set of common overlapping installation concerns and started kubeadm.

Kubeadm was designed as a focused tool for bootstrapping a best-practices Kubernetes cluster. The core tenet behind the kubeadm project was to create a tool that other installers can leverage and ultimately alleviate the amount of configuration that an individual installer needed to maintain. Since it began, kubeadm has become the underlying bootstrapping tool for several other applications, including Kubespray, Minikube, kind, etc.

However, while kubeadm and other bootstrap providers reduce installation complexity, they don’t address how to manage a cluster day-to-day or a Kubernetes environment long term. You are still faced with several questions when setting up a production environment, including:

• How can I consistently provision machines, load balancers, VPC, etc., across multiple infrastructure providers and locations?
• How can I automate cluster lifecycle management, including things like upgrades and cluster deletion?
• How can I scale these processes to manage any number of clusters?

SIG Cluster Lifecycle began the Cluster API project as a way to address these gaps by building declarative, Kubernetes-style APIs, that automate cluster creation, configuration, and management. Using this model, Cluster API can also be extended to support any infrastructure provider (AWS, Azure, vSphere, etc.) or bootstrap provider (kubeadm is default) you need. See the growing list of available providers.

Goals

• To manage the lifecycle (create, scale, upgrade, destroy) of Kubernetes-conformant clusters using a declarative API.
• To work in different environments, both on-premises and in the cloud.
• To define common operations, provide a default implementation, and provide the ability to swap out implementations for alternative ones.
• To reuse and integrate existing ecosystem components rather than duplicating their functionality (e.g. node-problem-detector, cluster autoscaler, SIG-Multi-cluster).
• To provide a transition path for Kubernetes lifecycle products to adopt Cluster API incrementally. Specifically, existing cluster lifecycle management tools should be able to adopt Cluster API in a staged manner, over the course of multiple releases, or even adopting a subset of Cluster API.

Non-goals

• To add these APIs to Kubernetes core (kubernetes/kubernetes).
  • This API should live in a namespace outside the core and follow the best practices defined by api-reviewers, but is not subject to core-api constraints.
• To manage the lifecycle of infrastructure unrelated to the running of Kubernetes-conformant clusters.
• To force all Kubernetes lifecycle products (kops, kubespray, GKE, AKS, EKS, IKS etc.) to support or use these APIs.
• To manage non-Cluster API provisioned Kubernetes-conformant clusters.
• To manage a single cluster spanning multiple infrastructure providers.
• To configure a machine at any time other than create or upgrade.
• To duplicate functionality that exists or is coming to other tooling, e.g., updating kubelet configuration (c.f. dynamic kubelet configuration), or updating apiserver, controller-manager, scheduler configuration (c.f. component-config effort) after the cluster is deployed.

🤗 Community, discussion, contribution, and support

Cluster API is developed in the open, and is constantly being improved by our users, contributors, and maintainers. It is because of you that we are able to automate cluster lifecycle management for the community. Join us!

If you have questions or want to get the latest project news, you can connect with us in the following ways:

• Chat with us on the Kubernetes Slack in the #cluster-api channel
• Subscribe to the SIG Cluster Lifecycle Google Group for access to documents and calendars
• Join our Cluster API working group sessions where we share the latest project news, demos, answer questions, and triage issues
  • Weekly on Wednesdays @ 10:00 PT on Zoom
  • Previous meetings: [ notes | recordings ]

Pull Requests and feedback on issues are very welcome! See the issue tracker if you’re unsure where to start, especially the Good first issue and Help wanted tags, and also feel free to reach out to discuss.

See also our contributor guide and the Kubernetes community page for more details on how to get involved.

Code of conduct

Participation in the Kubernetes community is governed by the Kubernetes Code of Conduct.

Quick Start

In this tutorial we’ll cover the basics of how to use Cluster API to create one or more Kubernetes clusters.

Installation

Common Prerequisites

• Install and setup kubectl in your local environment
• Install Kind and Docker

Install and/or configure a Kubernetes cluster

Cluster API requires an existing Kubernetes cluster accessible via kubectl. During the installation process the Kubernetes cluster will be transformed into a management cluster by installing the Cluster API provider components, so it is recommended to keep it separated from any application workload.

It is a common practice to create a temporary, local bootstrap cluster which is then used to provision a target management cluster on the selected infrastructure provider.

Choose one of the options below:

1. Existing Management Cluster

   For production use-cases a “real” Kubernetes cluster should be used with appropriate backup and DR policies and procedures in place. The Kubernetes cluster must be at least v1.20.0.

   export KUBECONFIG=<...>
   

OR

2. Kind

   kind can be used for creating a local Kubernetes cluster for development environments or for the creation of a temporary bootstrap cluster used to provision a target management cluster on the selected infrastructure provider.

   The installation procedure depends on the version of kind; if you are planning to use the Docker infrastructure provider, please follow the additional instructions in the dedicated tab:

   DefaultDockerKubeVirt

   Create the kind cluster:

   kind create cluster
   

   Test to ensure the local kind cluster is ready:

   kubectl cluster-info
   

   Run the following command to create a kind config file for allowing the Docker provider to access Docker on the host:

   cat > kind-cluster-with-extramounts.yaml <<EOF
   kind: Cluster
   apiVersion: kind.x-k8s.io/v1alpha4
   nodes:
   - role: control-plane
     extraMounts:
       - hostPath: /var/run/docker.sock
         containerPath: /var/run/docker.sock
   EOF
   

   Then follow the instruction for your kind version using kind create cluster --config kind-cluster-with-extramounts.yaml to create the management cluster using the above file.

   Create the Kind Cluster

   KubeVirt is a cloud native virtualization solution. The virtual machines we’re going to create and use for the workload cluster’s nodes, are actually running within pods in the management cluster. In order to communicate with the workload cluster’s API server, we’ll need to expose it. We are using Kind which is a limited environment. The easiest way to expose the workload cluster’s API server (a pod within a node running in a VM that is itself running within a pod in the management cluster, that is running inside a docker container), is to use a LoadBalancer service.

   To allow using a LoadBalancer service, we can’t use the kind’s default CNI (kindnet), but we’ll need to install another CNI, like Calico. In order to do that, we’ll need first to initiate the kind cluster with two modifications:

   1. Disable the default CNI
   2. Add the docker credentials to the cluster, to avoid the docker hub pull rate limit of the calico images; read more about it in the docker documentation, and in the kind documentation.

   Create a configuration file for kind. Please notice the docker config file path, and adjust it to your local setting:

   cat <<EOF > kind-config.yaml
   kind: Cluster
   apiVersion: kind.x-k8s.io/v1alpha4
   networking:
   # the default CNI will not be installed
     disableDefaultCNI: true
   nodes:
   - role: control-plane
     extraMounts:
      - containerPath: /var/lib/kubelet/config.json
        hostPath: <YOUR DOCKER CONFIG FILE PATH>
   EOF
   

   Now, create the kind cluster with the configuration file:

   kind create cluster --config=kind-config.yaml
   

   Test to ensure the local kind cluster is ready:

   kubectl cluster-info
   

   Install the Calico CNI

   Now we’ll need to install a CNI. In this example, we’re using calico, but other CNIs should work as well. Please see calico installation guide for more details (use the “Manifest” tab). Below is an example of how to install calico version v3.24.4.

   Use the Calico manifest to create the required resources; e.g.:

   kubectl create -f  https://raw.githubusercontent.com/projectcalico/calico/v3.24.4/manifests/calico.yaml
   

Install clusterctl

The clusterctl CLI tool handles the lifecycle of a Cluster API management cluster.

curl -L https://github.com/kubernetes-sigs/cluster-api/releases/download/v1.2.12/clusterctl-linux-amd64 -o clusterctl

chmod +x ./clusterctl

sudo mv ./clusterctl /usr/local/bin/clusterctl

clusterctl version

curl -L https://github.com/kubernetes-sigs/cluster-api/releases/download/v1.2.12/clusterctl-darwin-amd64 -o clusterctl

curl -L https://github.com/kubernetes-sigs/cluster-api/releases/download/v1.2.12/clusterctl-darwin-arm64 -o clusterctl

chmod +x ./clusterctl

sudo mv ./clusterctl /usr/local/bin/clusterctl

clusterctl version

brew install clusterctl

clusterctl version

curl.exe -L https://github.com/kubernetes-sigs/cluster-api/releases/download/v1.2.12/clusterctl-windows-amd64.exe -o clusterctl.exe

clusterctl.exe version

Initialize the management cluster

Now that we’ve got clusterctl installed and all the prerequisites in place, let’s transform the Kubernetes cluster into a management cluster by using clusterctl init.

The command accepts as input a list of providers to install; when executed for the first time, clusterctl init automatically adds to the list the cluster-api core provider, and if unspecified, it also adds the kubeadm bootstrap and kubeadm control-plane providers.

Enabling Feature Gates

Feature gates can be enabled by exporting environment variables before executing clusterctl init. For example, the ClusterTopology feature, which is required to enable support for managed topologies and ClusterClass, can be enabled via:

export CLUSTER_TOPOLOGY=true

Additional documentation about experimental features can be found in Experimental Features.

Initialization for common providers

Depending on the infrastructure provider you are planning to use, some additional prerequisites should be satisfied before getting started with Cluster API. See below for the expected settings for common providers.

curl -L https://github.com/kubernetes-sigs/cluster-api-provider-aws/releases/download/v2.1.4/clusterawsadm-linux-amd64 -o clusterawsadm

chmod +x clusterawsadm

sudo mv clusterawsadm /usr/local/bin

clusterawsadm version

curl -L https://github.com/kubernetes-sigs/cluster-api-provider-aws/releases/download/v2.1.4/clusterawsadm-darwin-amd64 -o clusterawsadm

curl -L https://github.com/kubernetes-sigs/cluster-api-provider-aws/releases/download/v2.1.4/clusterawsadm-darwin-arm64 -o clusterawsadm

chmod +x clusterawsadm

sudo mv clusterawsadm /usr/local/bin

clusterawsadm version

brew install clusterawsadm

clusterawsadm version

export AWS_REGION=us-east-1 # This is used to help encode your environment variables
export AWS_ACCESS_KEY_ID=<your-access-key>
export AWS_SECRET_ACCESS_KEY=<your-secret-access-key>
export AWS_SESSION_TOKEN=<session-token> # If you are using Multi-Factor Auth.

# The clusterawsadm utility takes the credentials that you set as environment
# variables and uses them to create a CloudFormation stack in your AWS account
# with the correct IAM resources.
clusterawsadm bootstrap iam create-cloudformation-stack

# Create the base64 encoded credentials using clusterawsadm.
# This command uses your environment variables and encodes
# them in a value to be stored in a Kubernetes Secret.
export AWS_B64ENCODED_CREDENTIALS=$(clusterawsadm bootstrap credentials encode-as-profile)

# Finally, initialize the management cluster
clusterctl init --infrastructure aws

export AZURE_SUBSCRIPTION_ID="<SubscriptionId>"

# Create an Azure Service Principal and paste the output here
export AZURE_TENANT_ID="<Tenant>"
export AZURE_CLIENT_ID="<AppId>"
export AZURE_CLIENT_SECRET="<Password>"

# Base64 encode the variables
export AZURE_SUBSCRIPTION_ID_B64="$(echo -n "$AZURE_SUBSCRIPTION_ID" | base64 | tr -d '\n')"
export AZURE_TENANT_ID_B64="$(echo -n "$AZURE_TENANT_ID" | base64 | tr -d '\n')"
export AZURE_CLIENT_ID_B64="$(echo -n "$AZURE_CLIENT_ID" | base64 | tr -d '\n')"
export AZURE_CLIENT_SECRET_B64="$(echo -n "$AZURE_CLIENT_SECRET" | base64 | tr -d '\n')"

# Settings needed for AzureClusterIdentity used by the AzureCluster
export AZURE_CLUSTER_IDENTITY_SECRET_NAME="cluster-identity-secret"
export CLUSTER_IDENTITY_NAME="cluster-identity"
export AZURE_CLUSTER_IDENTITY_SECRET_NAMESPACE="default"

# Create a secret to include the password of the Service Principal identity created in Azure
# This secret will be referenced by the AzureClusterIdentity used by the AzureCluster
kubectl create secret generic "${AZURE_CLUSTER_IDENTITY_SECRET_NAME}" --from-literal=clientSecret="${AZURE_CLIENT_SECRET}" --namespace "${AZURE_CLUSTER_IDENTITY_SECRET_NAMESPACE}"

# Finally, initialize the management cluster
clusterctl init --infrastructure azure

[Global]
api-url = <cloudstackApiUrl>
api-key = <cloudstackApiKey>
secret-key = <cloudstackSecretKey>

export CLOUDSTACK_B64ENCODED_SECRET=`cat cloud-config | base64 | tr -d '\n'`

clusterctl init --infrastructure cloudstack

export DIGITALOCEAN_ACCESS_TOKEN=<your-access-token>
export DO_B64ENCODED_CREDENTIALS="$(echo -n "${DIGITALOCEAN_ACCESS_TOKEN}" | base64 | tr -d '\n')"

# Initialize the management cluster
clusterctl init --infrastructure digitalocean

# Enable the experimental Cluster topology feature.
export CLUSTER_TOPOLOGY=true

# Initialize the management cluster
clusterctl init --infrastructure docker

export PACKET_API_KEY="34ts3g4s5g45gd45dhdh"

clusterctl init --infrastructure packet

# Create the base64 encoded credentials by catting your credentials json.
# This command uses your environment variables and encodes
# them in a value to be stored in a Kubernetes Secret.
export GCP_B64ENCODED_CREDENTIALS=$( cat /path/to/gcp-credentials.json | base64 | tr -d '\n' )

# Finally, initialize the management cluster
clusterctl init --infrastructure gcp

export IBMCLOUD_API_KEY=<you_api_key>

# Finally, initialize the management cluster
clusterctl init --infrastructure ibmcloud

# Initialize the management cluster
clusterctl init --infrastructure kubekey

METALLB_VER=$(curl "https://api.github.com/repos/metallb/metallb/releases/latest" | jq -r ".tag_name")
kubectl apply -f "https://raw.githubusercontent.com/metallb/metallb/${METALLB_VER}/config/manifests/metallb-native.yaml"
kubectl wait pods -n metallb-system -l app=metallb,component=controller --for=condition=Ready --timeout=10m
kubectl wait pods -n metallb-system -l app=metallb,component=speaker --for=condition=Ready --timeout=2m

GW_IP=$(docker network inspect -f '{{range .IPAM.Config}}{{.Gateway}}{{end}}' kind)
NET_IP=$(echo ${GW_IP} | sed -E 's|^([0-9]+\.[0-9]+)\..*$|\1|g')
cat <<EOF | sed -E "s|172.19|${NET_IP}|g" | kubectl apply -f -
apiVersion: metallb.io/v1beta1
kind: IPAddressPool
metadata:
  name: capi-ip-pool
  namespace: metallb-system
spec:
  addresses:
  - 172.19.255.200-172.19.255.250
---
apiVersion: metallb.io/v1beta1
kind: L2Advertisement
metadata:
  name: empty
  namespace: metallb-system
EOF

# get KubeVirt version
KV_VER=$(curl "https://api.github.com/repos/kubevirt/kubevirt/releases/latest" | jq -r ".tag_name")
# deploy required CRDs
kubectl apply -f "https://github.com/kubevirt/kubevirt/releases/download/${KV_VER}/kubevirt-operator.yaml"
# deploy the KubeVirt custom resource
kubectl apply -f "https://github.com/kubevirt/kubevirt/releases/download/${KV_VER}/kubevirt-cr.yaml"
kubectl wait -n kubevirt kv kubevirt --for=condition=Available --timeout=10m

clusterctl init --infrastructure kubevirt

# Initialize the management cluster
clusterctl init --infrastructure openstack

export OSC_SECRET_KEY=<your-secret-key>
export OSC_ACCESS_KEY=<your-access-key>
export OSC_REGION=<you-region>
# Create namespace
kubectl create namespace cluster-api-provider-outscale-system
# Create secret
kubectl create secret generic cluster-api-provider-outscale --from-literal=access_key=${OSC_ACCESS_KEY} --from-literal=secret_key=${OSC_SECRET_KEY} --from-literal=region=${OSC_REGION}  -n cluster-api-provider-outscale-system
# Initialize the management cluster
clusterctl init --infrastructure outscale

# Initialize the management cluster
clusterctl init --infrastructure vcd

clusterctl init --infrastructure vcluster

# Initialize the management cluster
clusterctl init --infrastructure virtink

# The username used to access the remote vSphere endpoint
export VSPHERE_USERNAME="vi-admin@vsphere.local"
# The password used to access the remote vSphere endpoint
# You may want to set this in ~/.cluster-api/clusterctl.yaml so your password is not in
# bash history
export VSPHERE_PASSWORD="admin!23"

# Finally, initialize the management cluster
clusterctl init --infrastructure vsphere

The output of clusterctl init is similar to this:

Fetching providers
Installing cert-manager Version="v1.11.0"
Waiting for cert-manager to be available...
Installing Provider="cluster-api" Version="v1.0.0" TargetNamespace="capi-system"
Installing Provider="bootstrap-kubeadm" Version="v1.0.0" TargetNamespace="capi-kubeadm-bootstrap-system"
Installing Provider="control-plane-kubeadm" Version="v1.0.0" TargetNamespace="capi-kubeadm-control-plane-system"
Installing Provider="infrastructure-docker" Version="v1.0.0" TargetNamespace="capd-system"

Your management cluster has been initialized successfully!

You can now create your first workload cluster by running the following:

  clusterctl generate cluster [name] --kubernetes-version [version] | kubectl apply -f -

Create your first workload cluster

Once the management cluster is ready, you can create your first workload cluster.

Preparing the workload cluster configuration

The clusterctl generate cluster command returns a YAML template for creating a workload cluster.

Required configuration for common providers

Depending on the infrastructure provider you are planning to use, some additional prerequisites should be satisfied before configuring a cluster with Cluster API. Instructions are provided for common providers below.

Otherwise, you can look at the clusterctl generate cluster command documentation for details about how to discover the list of variables required by a cluster templates.

export AWS_REGION=us-east-1
export AWS_SSH_KEY_NAME=default
# Select instance types
export AWS_CONTROL_PLANE_MACHINE_TYPE=t3.large
export AWS_NODE_MACHINE_TYPE=t3.large

# Name of the Azure datacenter location. Change this value to your desired location.
export AZURE_LOCATION="centralus"

# Select VM types.
export AZURE_CONTROL_PLANE_MACHINE_TYPE="Standard_D2s_v3"
export AZURE_NODE_MACHINE_TYPE="Standard_D2s_v3"

# [Optional] Select resource group. The default value is ${CLUSTER_NAME}.
export AZURE_RESOURCE_GROUP="<ResourceGroupName>"

clusterctl generate cluster --infrastructure cloudstack --list-variables capi-quickstart

# Set this to the name of the zone in which to deploy the cluster
export CLOUDSTACK_ZONE_NAME=<zone name>
# The name of the network on which the VMs will reside
export CLOUDSTACK_NETWORK_NAME=<network name>
# The endpoint of the workload cluster
export CLUSTER_ENDPOINT_IP=<cluster endpoint address>
export CLUSTER_ENDPOINT_PORT=<cluster endpoint port>
# The service offering of the control plane nodes
export CLOUDSTACK_CONTROL_PLANE_MACHINE_OFFERING=<control plane service offering name>
# The service offering of the worker nodes
export CLOUDSTACK_WORKER_MACHINE_OFFERING=<worker node service offering name>
# The capi compatible template to use
export CLOUDSTACK_TEMPLATE_NAME=<template name>
# The ssh key to use to log into the nodes
export CLOUDSTACK_SSH_KEY_NAME=<ssh key name>

export DO_REGION=nyc1
export DO_SSH_KEY_FINGERPRINT=<your-ssh-key-fingerprint>
export DO_CONTROL_PLANE_MACHINE_TYPE=s-2vcpu-2gb
export DO_CONTROL_PLANE_MACHINE_IMAGE=<your-capi-image-id>
export DO_NODE_MACHINE_TYPE=s-2vcpu-2gb
export DO_NODE_MACHINE_IMAGE==<your-capi-image-id>

# The list of service CIDR, default ["10.128.0.0/12"]
export SERVICE_CIDR=["10.96.0.0/12"]

# The list of pod CIDR, default ["192.168.0.0/16"]
export POD_CIDR=["192.168.0.0/16"]

# The service domain, default "cluster.local"
export SERVICE_DOMAIN="k8s.test"

export ENABLE_POD_SECURITY_STANDARD="false"

# Required (made up examples shown)
# The project where your cluster will be placed to.
# You have to get one from the Equinix Metal Console if you don't have one already.
export PROJECT_ID="2b59569f-10d1-49a6-a000-c2fb95a959a1"
# The facility where you want your cluster to be provisioned
export FACILITY="da11"
# What plan to use for your control plane nodes
export CONTROLPLANE_NODE_TYPE="m3.small.x86"
# What plan to use for your worker nodes
export WORKER_NODE_TYPE="m3.small.x86"
# The ssh key you would like to have access to the nodes
export SSH_KEY="ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDvMgVEubPLztrvVKgNPnRe9sZSjAqaYj9nmCkgr4PdK username@computer"
export CLUSTER_NAME="my-cluster"

# Optional (defaults shown)
export NODE_OS="ubuntu_18_04"
export POD_CIDR="192.168.0.0/16"
export SERVICE_CIDR="172.26.0.0/16"
# Only relevant if using the kube-vip flavor
export KUBE_VIP_VERSION="v0.5.0"

# Name of the GCP datacenter location. Change this value to your desired location
export GCP_REGION="<GCP_REGION>"
export GCP_PROJECT="<GCP_PROJECT>"
# Make sure to use same kubernetes version here as building the GCE image
export KUBERNETES_VERSION=1.23.3
# This is the image you built. See https://github.com/kubernetes-sigs/image-builder
export IMAGE_ID=projects/$GCP_PROJECT/global/images/<built image>
export GCP_CONTROL_PLANE_MACHINE_TYPE=n1-standard-2
export GCP_NODE_MACHINE_TYPE=n1-standard-2
export GCP_NETWORK_NAME=<GCP_NETWORK_NAME or default>
export CLUSTER_NAME="<CLUSTER_NAME>"

# Required environment variables for VPC
# VPC region
export IBMVPC_REGION=us-south
# VPC zone within the region
export IBMVPC_ZONE=us-south-1
# ID of the resource group in which the VPC will be created
export IBMVPC_RESOURCEGROUP=<your-resource-group-id>
# Name of the VPC
export IBMVPC_NAME=ibm-vpc-0
export IBMVPC_IMAGE_ID=<you-image-id>
# Profile for the virtual server instances
export IBMVPC_PROFILE=bx2-4x16
export IBMVPC_SSHKEY_ID=<your-sshkey-id>

# Required environment variables for PowerVS
export IBMPOWERVS_SSHKEY_NAME=<your-ssh-key>
# Internal and external IP of the network
export IBMPOWERVS_VIP=<internal-ip>
export IBMPOWERVS_VIP_EXTERNAL=<external-ip>
export IBMPOWERVS_VIP_CIDR=29
export IBMPOWERVS_IMAGE_NAME=<your-capi-image-name>
# ID of the PowerVS service instance
export IBMPOWERVS_SERVICE_INSTANCE_ID=<service-instance-id>
export IBMPOWERVS_NETWORK_NAME=<your-capi-network-name>

# Required environment variables
# The KKZONE is used to specify where to download the binaries. (e.g. "", "cn")
export KKZONE=""
# The ssh name of the all instance Linux user. (e.g. root, ubuntu)
export USER_NAME=<your-linux-user>
# The ssh password of the all instance Linux user.
export PASSWORD=<your-linux-user-password>
# The ssh IP address of the all instance. (e.g. "[{address: 192.168.100.3}, {address: 192.168.100.4}]")
export INSTANCES=<your-linux-ip-address>
# The cluster control plane VIP. (e.g. "192.168.100.100")
export CONTROL_PLANE_ENDPOINT_IP=<your-control-plane-virtual-ip>

export CAPK_GUEST_K8S_VERSION="v1.23.10"
export CRI_PATH="/var/run/containerd/containerd.sock"
export NODE_VM_IMAGE_TEMPLATE="quay.io/capk/ubuntu-2004-container-disk:${CAPK_GUEST_K8S_VERSION}"

# The URL of the kernel to deploy.
export DEPLOY_KERNEL_URL="http://172.22.0.1:6180/images/ironic-python-agent.kernel"
# The URL of the ramdisk to deploy.
export DEPLOY_RAMDISK_URL="http://172.22.0.1:6180/images/ironic-python-agent.initramfs"
# The URL of the Ironic endpoint.
export IRONIC_URL="http://172.22.0.1:6385/v1/"
# The URL of the Ironic inspector endpoint.
export IRONIC_INSPECTOR_URL="http://172.22.0.1:5050/v1/"
# Do not use a dedicated CA certificate for Ironic API. Any value provided in this variable disables additional CA certificate validation.
# To provide a CA certificate, leave this variable unset. If unset, then IRONIC_CA_CERT_B64 must be set.
export IRONIC_NO_CA_CERT=true
# Disables basic authentication for Ironic API. Any value provided in this variable disables authentication.
# To enable authentication, leave this variable unset. If unset, then IRONIC_USERNAME and IRONIC_PASSWORD must be set.
export IRONIC_NO_BASIC_AUTH=true
# Disables basic authentication for Ironic inspector API. Any value provided in this variable disables authentication.
# To enable authentication, leave this variable unset. If unset, then IRONIC_INSPECTOR_USERNAME and IRONIC_INSPECTOR_PASSWORD must be set.
export IRONIC_INSPECTOR_NO_BASIC_AUTH=true

clusterctl generate cluster --infrastructure nutanix --list-variables capi-quickstart

clusterctl generate cluster --infrastructure openstack --list-variables capi-quickstart

wget https://raw.githubusercontent.com/kubernetes-sigs/cluster-api-provider-openstack/master/templates/env.rc -O /tmp/env.rc
source /tmp/env.rc <path/to/clouds.yaml> <cloud>

# The list of nameservers for OpenStack Subnet being created.
# Set this value when you need create a new network/subnet while the access through DNS is required.
export OPENSTACK_DNS_NAMESERVERS=<dns nameserver>
# FailureDomain is the failure domain the machine will be created in.
export OPENSTACK_FAILURE_DOMAIN=<availability zone name>
# The flavor reference for the flavor for your server instance.
export OPENSTACK_CONTROL_PLANE_MACHINE_FLAVOR=<flavor>
# The flavor reference for the flavor for your server instance.
export OPENSTACK_NODE_MACHINE_FLAVOR=<flavor>
# The name of the image to use for your server instance. If the RootVolume is specified, this will be ignored and use rootVolume directly.
export OPENSTACK_IMAGE_NAME=<image name>
# The SSH key pair name
export OPENSTACK_SSH_KEY_NAME=<ssh key pair name>
# The external network
export OPENSTACK_EXTERNAL_NETWORK_ID=<external network ID>

# The outscale root disk iops
export OSC_IOPS="<IOPS>"
# The outscale root disk size
export OSC_VOLUME_SIZE="<VOLUME_SIZE>"
# The outscale root disk volumeType
export OSC_VOLUME_TYPE="<VOLUME_TYPE>"
# The outscale key pair
export OSC_KEYPAIR_NAME="<KEYPAIR_NAME>"
# The outscale subregion name
export OSC_SUBREGION_NAME="<SUBREGION_NAME>"
# The outscale vm type
export OSC_VM_TYPE="<VM_TYPE>"
# The outscale image name
export OSC_IMAGE_NAME="<IMAGE_NAME>"

clusterctl generate cluster --infrastructure vcd --list-variables capi-quickstart

export CLUSTER_NAME=kind
export CLUSTER_NAMESPACE=vcluster
export KUBERNETES_VERSION=1.23.4
export HELM_VALUES="service:\n  type: NodePort"

clusterctl generate cluster --infrastructure virtink --list-variables capi-quickstart

# The vCenter server IP or FQDN
export VSPHERE_SERVER="10.0.0.1"
# The vSphere datacenter to deploy the management cluster on
export VSPHERE_DATACENTER="SDDC-Datacenter"
# The vSphere datastore to deploy the management cluster on
export VSPHERE_DATASTORE="vsanDatastore"
# The VM network to deploy the management cluster on
export VSPHERE_NETWORK="VM Network"
# The vSphere resource pool for your VMs
export VSPHERE_RESOURCE_POOL="*/Resources"
# The VM folder for your VMs. Set to "" to use the root vSphere folder
export VSPHERE_FOLDER="vm"
# The VM template to use for your VMs
export VSPHERE_TEMPLATE="ubuntu-1804-kube-v1.17.3"
# The public ssh authorized key on all machines
export VSPHERE_SSH_AUTHORIZED_KEY="ssh-rsa AAAAB3N..."
# The certificate thumbprint for the vCenter server
export VSPHERE_TLS_THUMBPRINT="97:48:03:8D:78:A9..."
# The storage policy to be used (optional). Set to "" if not required
export VSPHERE_STORAGE_POLICY="policy-one"
# The IP address used for the control plane endpoint
export CONTROL_PLANE_ENDPOINT_IP="1.2.3.4"

Generating the cluster configuration

For the purpose of this tutorial, we’ll name our cluster capi-quickstart.

clusterctl generate cluster capi-quickstart --flavor development \
  --kubernetes-version v1.26.0 \
  --control-plane-machine-count=3 \
  --worker-machine-count=3 \
  > capi-quickstart.yaml

export CLUSTER_NAME=kind
export CLUSTER_NAMESPACE=vcluster
export KUBERNETES_VERSION=1.26.0
export HELM_VALUES="service:\n  type: NodePort"

kubectl create namespace ${CLUSTER_NAMESPACE}
clusterctl generate cluster ${CLUSTER_NAME} \
    --infrastructure vcluster \
    --kubernetes-version ${KUBERNETES_VERSION} \
    --target-namespace ${CLUSTER_NAMESPACE} | kubectl apply -f -

clusterctl generate cluster capi-quickstart \
  --infrastructure="kubevirt" \
  --flavor lb \
  --kubernetes-version ${CAPK_GUEST_K8S_VERSION} \
  --control-plane-machine-count=1 \
  --worker-machine-count=1 \
  > capi-quickstart.yaml

clusterctl generate cluster capi-quickstart \
  --kubernetes-version v1.26.0 \
  --control-plane-machine-count=3 \
  --worker-machine-count=3 \
  > capi-quickstart.yaml

This creates a YAML file named capi-quickstart.yaml with a predefined list of Cluster API objects; Cluster, Machines, Machine Deployments, etc.

The file can be eventually modified using your editor of choice.

See clusterctl generate cluster for more details.

Apply the workload cluster

When ready, run the following command to apply the cluster manifest.

kubectl apply -f capi-quickstart.yaml

The output is similar to this:

cluster.cluster.x-k8s.io/capi-quickstart created
dockercluster.infrastructure.cluster.x-k8s.io/capi-quickstart created
kubeadmcontrolplane.controlplane.cluster.x-k8s.io/capi-quickstart-control-plane created
dockermachinetemplate.infrastructure.cluster.x-k8s.io/capi-quickstart-control-plane created
machinedeployment.cluster.x-k8s.io/capi-quickstart-md-0 created
dockermachinetemplate.infrastructure.cluster.x-k8s.io/capi-quickstart-md-0 created
kubeadmconfigtemplate.bootstrap.cluster.x-k8s.io/capi-quickstart-md-0 created

Accessing the workload cluster

The cluster will now start provisioning. You can check status with:

kubectl get cluster

You can also get an “at glance” view of the cluster and its resources by running:

clusterctl describe cluster capi-quickstart

To verify the first control plane is up:

kubectl get kubeadmcontrolplane

You should see an output is similar to this:

NAME                    CLUSTER           INITIALIZED   API SERVER AVAILABLE   REPLICAS   READY   UPDATED   UNAVAILABLE   AGE    VERSION
capi-quickstart-g2trk   capi-quickstart   true                                 3                  3         3             4m7s   v1.26.0

After the first control plane node is up and running, we can retrieve the workload cluster Kubeconfig:

clusterctl get kubeconfig capi-quickstart > capi-quickstart.kubeconfig

Deploy a CNI solution

Calico is used here as an example.

kubectl --kubeconfig=./capi-quickstart.kubeconfig \
  apply -f https://raw.githubusercontent.com/kubernetes-sigs/cluster-api-provider-azure/main/templates/addons/calico.yaml

kubectl --kubeconfig=./capi-quickstart.kubeconfig get nodes

kubectl get vm

NAME                                  AGE    STATUS    READY
capi-quickstart-control-plane-7s945   167m   Running   True
capi-quickstart-md-0-zht5j            164m   Running   True

kubectl get vmi

NAME                                  AGE    PHASE     IP             NODENAME             READY
capi-quickstart-control-plane-7s945   167m   Running   10.244.82.16   kind-control-plane   True
capi-quickstart-md-0-zht5j            164m   Running   10.244.82.17   kind-control-plane   True

curl https://raw.githubusercontent.com/projectcalico/calico/v3.24.4/manifests/calico.yaml -o calico-workload.yaml

sed -i -E 's|^( +)# (- name: CALICO_IPV4POOL_CIDR)$|\1\2|g;'\
's|^( +)# (  value: )"192.168.0.0/16"|\1\2"10.243.0.0/16"|g;'\
'/- name: CLUSTER_TYPE/{ n; s/( +value: ").+/\1k8s"/g };'\
'/- name: CALICO_IPV4POOL_IPIP/{ n; s/value: "Always"/value: "Never"/ };'\
'/- name: CALICO_IPV4POOL_VXLAN/{ n; s/value: "Never"/value: "Always"/};'\
'/# Set Felix endpoint to host default action to ACCEPT./a\            - name: FELIX_VXLANPORT\n              value: "6789"' \
calico-workload.yaml

kubectl --kubeconfig=./capi-quickstart.kubeconfig create -f calico-workload.yaml

kubectl --kubeconfig=./capi-quickstart.kubeconfig get nodes

kubectl --kubeconfig=./capi-quickstart.kubeconfig \
  apply -f https://raw.githubusercontent.com/projectcalico/calico/v3.24.1/manifests/calico.yaml

kubectl --kubeconfig=./capi-quickstart.kubeconfig get nodes

NAME                                          STATUS   ROLES           AGE   VERSION
capi-quickstart-g2trk-9xrjv                   Ready    control-plane   12m   v1.26.0
capi-quickstart-g2trk-bmm9v                   Ready    control-plane   11m   v1.26.0
capi-quickstart-g2trk-hvs9q                   Ready    control-plane   13m   v1.26.0
capi-quickstart-md-0-55x6t-5649968bd7-8tq9v   Ready    <none>          12m   v1.26.0
capi-quickstart-md-0-55x6t-5649968bd7-glnjd   Ready    <none>          12m   v1.26.0
capi-quickstart-md-0-55x6t-5649968bd7-sfzp6   Ready    <none>          12m   v1.26.0

Clean Up

Delete workload cluster.

kubectl delete cluster capi-quickstart

Delete management cluster

kind delete cluster

Next steps

See the clusterctl documentation for more detail about clusterctl supported actions.

Concepts

Management cluster

A Kubernetes cluster that manages the lifecycle of Workload Clusters. A Management Cluster is also where one or more providers run, and where resources such as Machines are stored.

Workload cluster

A Kubernetes cluster whose lifecycle is managed by a Management Cluster.

Infrastructure provider

A component responsible for the provisioning of infrastructure/computational resources required by the Cluster or by Machines (e.g. VMs, networking, etc.). For example, cloud Infrastructure Providers include AWS, Azure, and Google, and bare metal Infrastructure Providers include VMware, MAAS, and metal3.io.

When there is more than one way to obtain resources from the same Infrastructure Provider (such as AWS offering both EC2 and EKS), each way is referred to as a variant.

Bootstrap provider

A component responsible for turning a server into a Kubernetes node as well as for:

1. Generating the cluster certificates, if not otherwise specified
2. Initializing the control plane, and gating the creation of other nodes until it is complete
3. Joining control plane and worker nodes to the cluster

Control plane

The control plane is a set of components that serve the Kubernetes API and continuously reconcile desired state using control loops.

• Self-provisioned: A Kubernetes control plane consisting of pods or machines wholly managed by a single Cluster API deployment. e.g kubeadm uses static pods for running components such as kube-apiserver, kube-controller-manager and kube-scheduler on control plane machines.

• Pod-based deployments require an external hosting cluster. The control plane components are deployed using standard Deployment and StatefulSet objects and the API is exposed using a Service.

• External or Managed control planes are offered and controlled by some system other than Cluster API, such as GKE, AKS, EKS, or IKS.

The default provider uses kubeadm to bootstrap the control plane. As of v1alpha3, it exposes the configuration via the KubeadmControlPlane object. The controller, capi-kubeadm-control-plane-controller-manager, can then create Machine and BootstrapConfig objects based on the requested replicas in the KubeadmControlPlane object.

Custom Resource Definitions (CRDs)

A CustomResourceDefinition is a built-in resource that lets you extend the Kubernetes API. Each CustomResourceDefinition represents a customization of a Kubernetes installation. The Cluster API provides and relies on several CustomResourceDefinitions:

Machine

A “Machine” is the declarative spec for an infrastructure component hosting a Kubernetes Node (for example, a VM). If a new Machine object is created, a provider-specific controller will provision and install a new host to register as a new Node matching the Machine spec. If the Machine’s spec is updated, the controller replaces the host with a new one matching the updated spec. If a Machine object is deleted, its underlying infrastructure and corresponding Node will be deleted by the controller.

Common fields such as Kubernetes version are modeled as fields on the Machine’s spec. Any information that is provider-specific is part of the InfrastructureRef and is not portable between different providers.

Machine Immutability (In-place Upgrade vs. Replace)

From the perspective of Cluster API, all Machines are immutable: once they are created, they are never updated (except for labels, annotations and status), only deleted.

For this reason, MachineDeployments are preferable. MachineDeployments handle changes to machines by replacing them, in the same way core Deployments handle changes to Pod specifications.

MachineDeployment

A MachineDeployment provides declarative updates for Machines and MachineSets.

A MachineDeployment works similarly to a core Kubernetes Deployment. A MachineDeployment reconciles changes to a Machine spec by rolling out changes to 2 MachineSets, the old and the newly updated.

MachineSet

A MachineSet’s purpose is to maintain a stable set of Machines running at any given time.

A MachineSet works similarly to a core Kubernetes ReplicaSet. MachineSets are not meant to be used directly, but are the mechanism MachineDeployments use to reconcile desired state.

MachineHealthCheck

A MachineHealthCheck defines the conditions when a Node should be considered unhealthy.

If the Node matches these unhealthy conditions for a given user-configured time, the MachineHealthCheck initiates remediation of the Node. Remediation of Nodes is performed by deleting the corresponding Machine.

MachineHealthChecks will only remediate Nodes if they are owned by a MachineSet. This ensures that the Kubernetes cluster does not lose capacity, since the MachineSet will create a new Machine to replace the failed Machine.

BootstrapData

BootstrapData contains the Machine or Node role-specific initialization data (usually cloud-init) used by the Infrastructure Provider to bootstrap a Machine into a Node.

Personas

This document describes the personas for the Cluster API project as driven from use cases.

We are marking a “proposed priority for project at this time” per use case. This is not intended to say that these use cases aren’t awesome or important. They are intended to indicate where we, as a project, have received a great deal of interest, and as a result where we think we should invest right now to get the most users for our project. If interest grows in other areas, they will be elevated. And, since this is an open source project, if you want to drive feature development for a less-prioritized persona, we absolutely encourage you to join us and do that.

Use-case driven personas

Service Provider: Managed Kubernetes

Managed Kubernetes is an offering in which a provider is automating the lifecycle management of Kubernetes clusters, including full control planes that are available to, and used directly by, the customer.

Proposed priority for project at this time: High

There are several projects from several companies that are building out proposed managed Kubernetes offerings (Project Pacific’s Kubernetes Service from VMware, Microsoft Azure, Google Cloud, Red Hat) and they have all expressed a desire to use Cluster API. This looks like a good place to make sure Cluster API works well, and then expand to other use cases.

Feature matrix

Service Provider: Kubernetes-as-a-Service

Examples of a Kubernetes-as-a-Service provider include services such as Red Hat’s hosted OpenShift, AKS, GKE, and EKS. The cloud services manage the control plane, often giving those cloud resources away “for free,” and the customers spin up and down their own worker nodes.

Proposed priority for project at this time: Medium

Existing Kubernetes as a Service providers, e.g. AKS, GKE have indicated interest in replacing their off-tree automation with Cluster API, however since they already had to build their own automation and it is currently “getting the job done,” switching to Cluster API is not a top priority for them, although it is desirable.

Feature matrix

Cluster API Developer

The Cluster API developer is a developer of Cluster API who needs tools and services to make their development experience more productive and pleasant. It’s also important to take a look at the on-boarding experience for new developers to make sure we’re building out a project that other people can more easily submit patches and features to, to encourage inclusivity and welcome new contributors.

Proposed priority for project at this time: Low

We think we’re in a good place right now, and while we welcome contributions to improve the development experience of the project, it should not be the primary product focus of the open source development team to make development better for ourselves.

Feature matrix

Raw API Consumers

Examples of a raw API consumer is a tool like Prow, a customized enterprise platform built on top of Cluster API, or perhaps an advanced “give me a Kubernetes cluster” button exposing some customization that is built using Cluster API.

Proposed priority for project at this time: Low

Feature matrix

Tooling: Provisioners

Examples of this use case, in which a tooling provisioner is using Cluster API to automate behavior, includes tools such as kops and kubicorn.

Proposed priority for project at this time: Low

Maintainers of tools such as kops have indicated interest in using Cluster API, but they have also indicated they do not have much time to take on the work. If this changes, this use case would increase in priority.

Feature matrix

Service Provider: End User/Consumer

This user would be an end user or consumer who is given direct access to Cluster API via their service provider to manage Kubernetes clusters. While there are some commercial projects who plan on doing this (Project Pacific, others), they are doing this as a “super user” feature behind the backdrop of a “Managed Kubernetes” offering.

Proposed priority for project at this time: Low

This is a use case we should keep an eye on to see how people use Cluster API directly, but we think the more relevant use case is people building managed offerings on top at this top.

Feature matrix

Cluster Management Tasks

This section provides details for some of the operations that need to be performed when managing clusters.

Certificate Management

This section details some tasks related to certificate management.

Using Custom Certificates

Cluster API expects certificates and keys used for bootstrapping to follow the below convention. CABPK generates new certificates using this convention if they do not already exist.

Each certificate must be stored in a single secret named one of:

Example

apiVersion: v1
kind: Secret
metadata:
  name: cluster1-ca
type: kubernetes.io/tls
data:
  tls.crt: <base 64 encoded PEM>
  tls.key: <base 64 encoded PEM>

Generating a Kubeconfig with your own CA

1. Create a new Certificate Signing Request (CSR) for the admin user with the system:masters Kubernetes role, or specify any other role under O.

   openssl req  -subj "/CN=admin/O=system:masters" -new -newkey rsa:2048 -nodes -keyout admin.key  -out admin.csr
   

2. Sign the CSR using the [cluster-name]-ca key:

   openssl x509 -req -in admin.csr -CA tls.crt -CAkey tls.key -CAcreateserial -out admin.crt -days 5 -sha256
   

3. Update your kubeconfig with the sign key:

   kubectl config set-credentials cluster-admin --client-certificate=admin.crt --client-key=admin.key --embed-certs=true
   

Cluster API bootstrap provider kubeadm

What is the Cluster API bootstrap provider kubeadm?

Cluster API bootstrap provider Kubeadm (CABPK) is a component responsible for generating a cloud-init script to turn a Machine into a Kubernetes Node. This implementation uses kubeadm for Kubernetes bootstrap.

Resources

• design doc
• The Kubebuilder Book

How does CABPK work?

Assuming you have deployed the CAPI and CAPD controllers, create a Cluster object and its corresponding DockerCluster infrastructure object.

kind: DockerCluster
apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
metadata:
  name: my-cluster-docker
---
kind: Cluster
apiVersion: cluster.x-k8s.io/v1beta1
metadata:
  name: my-cluster
spec:
  infrastructureRef:
    kind: DockerCluster
    apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
    name: my-cluster-docker

Now you can start creating machines by defining a Machine, its corresponding DockerMachine object, and the KubeadmConfig bootstrap object.

kind: KubeadmConfig
apiVersion: bootstrap.cluster.x-k8s.io/v1beta1
metadata:
  name: my-control-plane1-config
spec:
  initConfiguration:
    nodeRegistration:
      kubeletExtraArgs:
        eviction-hard: nodefs.available<0%,nodefs.inodesFree<0%,imagefs.available<0%
  clusterConfiguration:
    controllerManager:
      extraArgs:
        enable-hostpath-provisioner: "true"
---
kind: DockerMachine
apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
metadata:
  name: my-control-plane1-docker
---
kind: Machine
apiVersion: cluster.x-k8s.io/v1beta1
metadata:
  name: my-control-plane1
  labels:
    cluster.x-k8s.io/cluster-name: my-cluster
    cluster.x-k8s.io/control-plane: "true"
    set: controlplane
spec:
  bootstrap:
    configRef:
      kind: KubeadmConfig
      apiVersion: bootstrap.cluster.x-k8s.io/v1beta1
      name: my-control-plane1-config
  infrastructureRef:
    kind: DockerMachine
    apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
    name: my-control-plane1-docker
  version: "v1.19.1"

CABPK’s main responsibility is to convert a KubeadmConfig bootstrap object into a cloud-init script that is going to turn a Machine into a Kubernetes Node using kubeadm.

The cloud-init script will be saved into a secret KubeadmConfig.Status.DataSecretName and then the infrastructure provider (CAPD in this example) will pick up this value and proceed with the machine creation and the actual bootstrap.

KubeadmConfig objects

The KubeadmConfig object allows full control of Kubeadm init/join operations by exposing raw InitConfiguration, ClusterConfiguration and JoinConfiguration objects.

InitConfiguration and JoinConfiguration exposes Patches field which can be used to specify the patches from a directory, this support is available from K8s 1.22 version onwards.

CABPK will fill in some values if they are left empty with sensible defaults:

IMPORTANT! overriding above defaults could lead to broken Clusters.

[1] if both clusterConfiguration.KubernetesVersion and Machine.Spec.Version are empty, the latest Kubernetes version will be installed (as defined by the default kubeadm behavior).

Examples

Valid combinations of configuration objects are:

• for KCP, InitConfiguration and ClusterConfiguration for the first control plane node; JoinConfiguration for additional control plane nodes
• for machine deployments, JoinConfiguration for worker nodes

Bootstrap control plane node:

kind: KubeadmConfig
apiVersion: bootstrap.cluster.x-k8s.io/v1beta1
metadata:
  name: my-control-plane1-config
spec:
  initConfiguration:
    nodeRegistration:
      kubeletExtraArgs:
        eviction-hard: nodefs.available<0%,nodefs.inodesFree<0%,imagefs.available<0%
  clusterConfiguration:
    controllerManager:
      extraArgs:
        enable-hostpath-provisioner: "true"

Additional control plane nodes:

kind: KubeadmConfig
apiVersion: bootstrap.cluster.x-k8s.io/v1beta1
metadata:
  name: my-control-plane2-config
spec:
  joinConfiguration:
    nodeRegistration:
      kubeletExtraArgs:
        eviction-hard: nodefs.available<0%,nodefs.inodesFree<0%,imagefs.available<0%
    controlPlane: {}

worker nodes:

kind: KubeadmConfig
apiVersion: bootstrap.cluster.x-k8s.io/v1beta1
metadata:
  name: my-worker1-config
spec:
  joinConfiguration:
    nodeRegistration:
      kubeletExtraArgs:
        eviction-hard: nodefs.available<0%,nodefs.inodesFree<0%,imagefs.available<0%

Bootstrap Orchestration

CABPK supports multiple control plane machines initing at the same time. The generation of cloud-init scripts of different machines is orchestrated in order to ensure a cluster bootstrap process that will be compliant with the correct Kubeadm init/join sequence. More in detail:

1. cloud-config-data generation starts only after Cluster.Status.InfrastructureReady flag is set to true.
2. at this stage, cloud-config-data will be generated for the first control plane machine only, keeping on hold additional control plane machines existing in the cluster, if any (kubeadm init).
3. after the ControlPlaneInitialized conditions on the cluster object is set to true, the cloud-config-data for all the other machines are generated (kubeadm join/join —control-plane).

Certificate Management

The user can choose two approaches for certificate management:

1. provide required certificate authorities (CAs) to use for kubeadm init/kubeadm join --control-plane; such CAs should be provided as a Secrets objects in the management cluster.
2. let KCP to generate the necessary Secrets objects with a self-signed certificate authority for kubeadm

See here for more info about certificate management with kubeadm.

Additional Features

The KubeadmConfig object supports customizing the content of the config-data. The following examples illustrate how to specify these options. They should be adapted to fit your environment and use case.

• KubeadmConfig.Files specifies additional files to be created on the machine, either with content inline or by referencing a secret.

  files:
  - contentFrom:
      secret:
        key: node-cloud.json
        name: ${CLUSTER_NAME}-md-0-cloud-json
    owner: root:root
    path: /etc/kubernetes/cloud.json
    permissions: "0644"
  - path: /etc/kubernetes/cloud.json
    owner: "root:root"
    permissions: "0644"
    content: |
      {
        "cloud": "CustomCloud"
      }
  

• KubeadmConfig.PreKubeadmCommands specifies a list of commands to be executed before kubeadm init/join

  preKubeadmCommands:
    - hostname "{{ ds.meta_data.hostname }}"
    - echo "{{ ds.meta_data.hostname }}" >/etc/hostname
  

• KubeadmConfig.PostKubeadmCommands same as above, but after kubeadm init/join

  postKubeadmCommands:
    - echo "success" >/var/log/my-custom-file.log
  

• KubeadmConfig.Users specifies a list of users to be created on the machine

  users:
    - name: capiuser
      sshAuthorizedKeys:
      - '${SSH_AUTHORIZED_KEY}'
      sudo: ALL=(ALL) NOPASSWD:ALL
  

• KubeadmConfig.NTP specifies NTP settings for the machine

  ntp:
    servers:
      - IP_ADDRESS
    enabled: true
  

• KubeadmConfig.DiskSetup specifies options for the creation of partition tables and file systems on devices.

  diskSetup:
    filesystems:
    - device: /dev/disk/azure/scsi1/lun0
      extraOpts:
      - -E
      - lazy_itable_init=1,lazy_journal_init=1
      filesystem: ext4
      label: etcd_disk
    - device: ephemeral0.1
      filesystem: ext4
      label: ephemeral0
      replaceFS: ntfs
    partitions:
    - device: /dev/disk/azure/scsi1/lun0
      layout: true
      overwrite: false
      tableType: gpt
  

• KubeadmConfig.Mounts specifies a list of mount points to be setup.

  mounts:
  - - LABEL=etcd_disk
    - /var/lib/etcddisk
  

• KubeadmConfig.Verbosity specifies the kubeadm log level verbosity

  verbosity: 10
  

• KubeadmConfig.UseExperimentalRetryJoin replaces a basic kubeadm command with a shell script with retries for joins. This will add about 40KB to userdata.

  useExperimentalRetryJoin: true
  

For more information on cloud-init options, see cloud config examples.

Upgrading management and workload clusters

Considerations

Supported versions of Kubernetes

If you are upgrading the version of Kubernetes for a cluster managed by Cluster API, check that the running version of Cluster API on the Management Cluster supports the target Kubernetes version.

You may need to upgrade the version of Cluster API in order to support the target Kubernetes version.

In addition, you must always upgrade between Kubernetes minor versions in sequence, e.g. if you need to upgrade from Kubernetes v1.17 to v1.19, you must first upgrade to v1.18.

Images

For kubeadm based clusters, infrastructure providers require a “machine image” containing pre-installed, matching versions of kubeadm and kubelet, ensure that relevant infrastructure machine templates reference the appropriate image for the Kubernetes version.

Upgrading using Cluster API

The high level steps to fully upgrading a cluster are to first upgrade the control plane and then upgrade the worker machines.

Upgrading the control plane machines

How to upgrade the underlying machine image

To upgrade the control plane machines underlying machine images, the MachineTemplate resource referenced by the KubeadmControlPlane must be changed. Since MachineTemplate resources are immutable, the recommended approach is to

1. Copy the existing MachineTemplate.
2. Modify the values that need changing, such as instance type or image ID.
3. Create the new MachineTemplate on the management cluster.
4. Modify the existing KubeadmControlPlane resource to reference the new MachineTemplate resource in the infrastructureRef field.

The next step will trigger a rolling update of the control plane using the new values found in the new MachineTemplate.

How to upgrade the Kubernetes control plane version

To upgrade the Kubernetes control plane version make a modification to the KubeadmControlPlane resource’s Spec.Version field. This will trigger a rolling upgrade of the control plane and, depending on the provider, also upgrade the underlying machine image.

Some infrastructure providers, such as AWS, require that if a specific machine image is specified, it has to match the Kubernetes version specified in the KubeadmControlPlane spec. In order to only trigger a single upgrade, the new MachineTemplate should be created first and then both the Version and InfrastructureTemplate should be modified in a single transaction.

How to schedule a machine rollout

A KubeadmControlPlane resource has a field RolloutAfter that can be set to a timestamp (RFC-3339) after which a rollout should be triggered regardless of whether there were any changes to the KubeadmControlPlane.Spec or not. This would roll out replacement control plane nodes which can be useful e.g. to perform certificate rotation, reflect changes to machine templates, move to new machines, etc.

Note that this field can only be used for triggering a rollout, not for delaying one. Specifically, a rollout can also happen before the time specified in RolloutAfter if any changes are made to the spec before that time.

To do the same for machines managed by a MachineDeployment it’s enough to make an arbitrary change to its Spec.Template, one common approach is to run:

clusterctl alpha rollout restart machinedeployment/my-md-0

This will modify the template by setting an cluster.x-k8s.io/restartedAt annotation which will trigger a rollout.

Upgrading machines managed by a MachineDeployment

Upgrades are not limited to just the control plane. This section is not related to Kubeadm control plane specifically, but is the final step in fully upgrading a Cluster API managed cluster.

It is recommended to manage machines with one or more MachineDeployments. MachineDeployments will transparently manage MachineSets and Machines to allow for a seamless scaling experience. A modification to the MachineDeployments spec will begin a rolling update of the machines. Follow these instructions for changing the template for an existing MachineDeployment.

MachineDeployments support different strategies for rolling out changes to Machines:

• RollingUpdate

Changes are rolled out by honouring MaxUnavailable and MaxSurge values. Only values allowed are of type Int or Strings with an integer and percentage symbol e.g “5%”.

• OnDelete

Changes are rolled out driven by the user or any entity deleting the old Machines. Only when a Machine is fully deleted a new one will come up.

For a more in-depth look at how MachineDeployments manage scaling events, take a look at the MachineDeployment controller documentation and the MachineSet controller documentation.

Upgrading Cluster API components

When to upgrade

In general, it’s recommended to upgrade to the latest version of Cluster API to take advantage of bug fixes, new features and improvements.

Considerations

If moving between different API versions, there may be additional tasks that you need to complete. See below for detailed instructions.

Ensure that the version of Cluster API is compatible with the Kubernetes version of the management cluster.

Upgrading to newer versions of 1.0.x

Use clusterctl to upgrade between versions of Cluster API 1.0.x.

Upgrading from Cluster API v1alpha3 (0.3.x) to Cluster API v1beta1 (1.0.x)

For detailed information about the changes from v1alpha3 to v1beta1, please refer to the Cluster API v1alpha3 compared to v1alpha4 section and the Cluster API v1alpha4 compared to v1beta1 section.

Use clusterctl to upgrade from Cluster API v0.3.x to Cluster API 1.0.x.

You should now be able to manage your resources using the v1beta1 version of the Cluster API components.

Upgrading from Cluster API v1alpha4 (0.4.x) to Cluster API v1beta1 (1.0.x)

For detailed information about the changes from v1alpha4 to v1beta1, please refer to the Cluster API v1alpha4 compared to v1beta1 section.

Use clusterctl to upgrade from Cluster API v0.4.x to Cluster API 1.0.x.

You should now be able to manage your resources using the v1alpha4 version of the Cluster API components.

Kubeadm control plane

Using the Kubeadm control plane type to manage a control plane provides several ways to upgrade control plane machines.

Kubeconfig management

KCP will generate and manage the admin Kubeconfig for clusters. The client certificate for the admin user is created with a valid lifespan of a year, and will be automatically regenerated when the cluster is reconciled and has less than 6 months of validity remaining.

Upgrades

See the section on upgrading clusters.

Running workloads on control plane machines

We don’t suggest running workloads on control planes, and highly encourage avoiding it unless absolutely necessary.

However, in the case the user wants to run non-control plane workloads on control plane machines they are ultimately responsible for ensuring the proper functioning of those workloads, given that KCP is not aware of the specific requirements for each type of workload (e.g. preserving quorum, shutdown procedures etc.).

In order to do so, the user could leverage on the same assumption that applies to all the Cluster API Machines:

• The Kubernetes node hosted on the Machine will be cordoned & drained before removal (with well known exceptions like full Cluster deletion).
• The Machine will respect PreDrainDeleteHook and PreTerminateDeleteHook. see the Machine Deletion Phase Hooks proposal for additional details.

Updating Machine Infrastructure and Bootstrap Templates

Updating Infrastructure Machine Templates

Several different components of Cluster API leverage infrastructure machine templates, including KubeadmControlPlane, MachineDeployment, and MachineSet. These MachineTemplate resources should be immutable, unless the infrastructure provider documentation indicates otherwise for certain fields (see below for more details).

The correct process for modifying an infrastructure machine template is as follows:

1. Duplicate an existing template. Users can use kubectl get <MachineTemplateType> <name> -o yaml > file.yaml to retrieve a template configuration from a running cluster to serve as a starting point.
2. Update the desired fields. Fields that might need to be modified could include the SSH key, the AWS instance type, or the Azure VM size. Refer to the provider-specific documentation for more details on the specific fields that each provider requires or accepts.
3. Give the newly-modified template a new name by modifying the metadata.name field (or by using metadata.generateName).
4. Create the new infrastructure machine template on the API server using kubectl. (If the template was initially created using the command in step 1, be sure to clear out any extraneous metadata, including the resourceVersion field, before trying to send it to the API server.)

Once the new infrastructure machine template has been persisted, users may modify the object that was referencing the infrastructure machine template. For example, to modify the infrastructure machine template for the KubeadmControlPlane object, users would modify the spec.infrastructureTemplate.name field. For a MachineDeployment, users would need to modify the spec.template.spec.infrastructureRef.name field and the controller would orchestrate the upgrade by managing MachineSets pointing to the new and old references. In the case of a MachineSet with no MachineDeployment owner, if its template reference is changed, it will only affect upcoming Machines.

In all cases, the name field should be updated to point to the newly-modified infrastructure machine template. This will trigger a rolling update. (This same process is described in the documentation for upgrading the underlying machine image for KubeadmControlPlane in the “How to upgrade the underlying machine image” section.)

Some infrastructure providers may, at their discretion, choose to support in-place modifications of certain infrastructure machine template fields. This may be useful if an infrastructure provider is able to make changes to running instances/machines, such as updating allocated memory or CPU capacity. In such cases, however, Cluster API will not trigger a rolling update.

Updating Bootstrap Templates

Several different components of Cluster API leverage bootstrap templates, including MachineDeployment, and MachineSet. When used in MachineDeployment or MachineSet changes to those templates do not trigger rollouts of already existing Machines. New Machines are created based on the current version of the bootstrap template.

The correct process for modifying a bootstrap template is as follows:

1. Duplicate an existing template. Users can use kubectl get <BootstrapTemplateType> <name> -o yaml > file.yaml to retrieve a template configuration from a running cluster to serve as a starting point.
2. Update the desired fields.
3. Give the newly-modified template a new name by modifying the metadata.name field (or by using metadata.generateName).
4. Create the new bootstrap template on the API server using kubectl. (If the template was initially created using the command in step 1, be sure to clear out any extraneous metadata, including the resourceVersion field, before trying to send it to the API server.)

Once the new bootstrap template has been persisted, users may modify the object that was referencing the bootstrap template. For example, to modify the bootstrap template for the MachineDeployment object, users would modify the spec.template.spec.bootstrap.configRef.name field. The name field should be updated to point to the newly-modified bootstrap template. This will trigger a rolling update.

Automated Machine management

This section details some tasks related to automated Machine management.

• Scaling
• Autoscaling
• Healthchecking

Scaling Nodes

This section applies only to worker Machines. You can add or remove compute capacity for your cluster workloads by creating or removing Machines. A Machine expresses intent to have a Node with a defined form factor.

Machines can be owned by scalable resources i.e. MachineSet and MachineDeployments.

You can scale MachineSets and MachineDeployments in or out by expressing intent via .spec.replicas or updating the scale subresource e.g kubectl scale machinedeployment foo --replicas=5.

When you delete a Machine directly or by scaling down, the same process takes place in the same order:

• The Node backed by that Machine will try to be drained indefinitely and will wait for any volume to be detached from the Node unless you specify a .spec.nodeDrainTimeout.
  • CAPI uses default kubectl draining implementation with -–ignore-daemonsets=true. If you needed to ensure DaemonSets eviction you’d need to do so manually by also adding proper taints to avoid rescheduling.
• The infrastructure backing that Node will try to be deleted indefinitely.
• Only when the infrastructure is gone, the Node will try to be deleted indefinitely unless you specify .spec.nodeDeletionTimeout.

Using the Cluster Autoscaler

This section applies only to worker Machines. Cluster Autoscaler is a tool that automatically adjusts the size of the Kubernetes cluster based on the utilization of Pods and Nodes in your cluster. For more general information about the Cluster Autoscaler, please see the project documentation.

The following instructions are a reproduction of the Cluster API provider specific documentation from the Autoscaler project documentation.

Cluster Autoscaler on Cluster API

The cluster autoscaler on Cluster API uses the cluster-api project to manage the provisioning and de-provisioning of nodes within a Kubernetes cluster.

Table of Contents:

• Kubernetes Version
• Starting the Autoscaler
• Configuring node group auto discovery
• Connecting cluster-autoscaler to Cluster API management and workload Clusters
  • Autoscaler running in a joined cluster using service account credentials
  • Autoscaler running in workload cluster using service account credentials, with separate management cluster
  • Autoscaler running in management cluster using service account credentials, with separate workload cluster
  • Autoscaler running anywhere, with separate kubeconfigs for management and workload clusters
  • Autoscaler running anywhere, with a common kubeconfig for management and workload clusters
• Enabling Autoscaling
  • Scale from zero support
    • RBAC changes for scaling from zero
    • Pre-defined labels and taints on nodes scaled from zero
• Specifying a Custom Resource Group
• Specifying a Custom Resource Version
• Sample manifest
  • A note on permissions
• Autoscaling with ClusterClass and Managed Topologies
• Special note on GPU instances
• Special note on balancing similar node groups

Kubernetes Version

The cluster-api provider requires Kubernetes v1.16 or greater to run the v1alpha3 version of the API.

Starting the Autoscaler

To enable the Cluster API provider, you must first specify it in the command line arguments to the cluster autoscaler binary. For example:

cluster-autoscaler --cloud-provider=clusterapi

Please note, this example only shows the cloud provider options, you will most likely need other command line flags. For more information you can invoke cluster-autoscaler --help to see a full list of options.

Configuring node group auto discovery

If you do not configure node group auto discovery, cluster autoscaler will attempt to match nodes against any scalable resources found in any namespace and belonging to any Cluster.

Limiting cluster autoscaler to only match against resources in the blue namespace

--node-group-auto-discovery=clusterapi:namespace=blue

Limiting cluster autoscaler to only match against resources belonging to Cluster test1

--node-group-auto-discovery=clusterapi:clusterName=test1

Limiting cluster autoscaler to only match against resources matching the provided labels

--node-group-auto-discovery=clusterapi:color=green,shape=square

These can be mixed and matched in any combination, for example to only match resources in the staging namespace, belonging to the purple cluster, with the label owner=jim:

--node-group-auto-discovery=clusterapi:namespace=staging,clusterName=purple,owner=jim

Connecting cluster-autoscaler to Cluster API management and workload Clusters

You will also need to provide the path to the kubeconfig(s) for the management and workload cluster you wish cluster-autoscaler to run against. To specify the kubeconfig path for the workload cluster to monitor, use the --kubeconfig option and supply the path to the kubeconfig. If the --kubeconfig option is not specified, cluster-autoscaler will attempt to use an in-cluster configuration. To specify the kubeconfig path for the management cluster to monitor, use the --cloud-config option and supply the path to the kubeconfig. If the --cloud-config option is not specified it will fall back to using the kubeconfig that was provided with the --kubeconfig option.

Autoscaler running in a joined cluster using service account credentials

+-----------------+
| mgmt / workload |
| --------------- |
|    autoscaler   |
+-----------------+

Use in-cluster config for both management and workload cluster:

cluster-autoscaler --cloud-provider=clusterapi

Autoscaler running in workload cluster using service account credentials, with separate management cluster

+--------+              +------------+
|  mgmt  |              |  workload  |
|        | cloud-config | ---------- |
|        |<-------------+ autoscaler |
+--------+              +------------+

Use in-cluster config for workload cluster, specify kubeconfig for management cluster:

cluster-autoscaler --cloud-provider=clusterapi \
                   --cloud-config=/mnt/kubeconfig

Autoscaler running in management cluster using service account credentials, with separate workload cluster

+------------+             +----------+
|    mgmt    |             | workload |
| ---------- | kubeconfig  |          |
| autoscaler +------------>|          |
+------------+             +----------+

Use in-cluster config for management cluster, specify kubeconfig for workload cluster:

cluster-autoscaler --cloud-provider=clusterapi \
                   --kubeconfig=/mnt/kubeconfig \
                   --clusterapi-cloud-config-authoritative

Autoscaler running anywhere, with separate kubeconfigs for management and workload clusters

+--------+               +------------+             +----------+
|  mgmt  |               |     ?      |             | workload |
|        |  cloud-config | ---------- | kubeconfig  |          |
|        |<--------------+ autoscaler +------------>|          |
+--------+               +------------+             +----------+

Use separate kubeconfigs for both management and workload cluster:

cluster-autoscaler --cloud-provider=clusterapi \
                   --kubeconfig=/mnt/workload.kubeconfig \
                   --cloud-config=/mnt/management.kubeconfig

Autoscaler running anywhere, with a common kubeconfig for management and workload clusters

+---------------+             +------------+
| mgmt/workload |             |     ?      |
|               |  kubeconfig | ---------- |
|               |<------------+ autoscaler |
+---------------+             +------------+

Use a single provided kubeconfig for both management and workload cluster:

cluster-autoscaler --cloud-provider=clusterapi \
                   --kubeconfig=/mnt/workload.kubeconfig

Enabling Autoscaling

To enable the automatic scaling of components in your cluster-api managed cloud there are a few annotations you need to provide. These annotations must be applied to either MachineSet, MachineDeployment, or MachinePool resources depending on the type of cluster-api mechanism that you are using.

There are two annotations that control how a cluster resource should be scaled:

• cluster.x-k8s.io/cluster-api-autoscaler-node-group-min-size - This specifies the minimum number of nodes for the associated resource group. The autoscaler will not scale the group below this number. Please note that the cluster-api provider will not scale down to, or from, zero unless that capability is enabled (see Scale from zero support).

• cluster.x-k8s.io/cluster-api-autoscaler-node-group-max-size - This specifies the maximum number of nodes for the associated resource group. The autoscaler will not scale the group above this number.

The autoscaler will monitor any MachineSet, MachineDeployment, or MachinePool containing both of these annotations.

Note: MachinePool support in cluster-autoscaler requires a provider implementation that supports the new “MachinePool Machines” feature. MachinePools in Cluster API are considered an experimental feature and are not enabled by default.

Scale from zero support

The Cluster API community has defined an opt-in method for infrastructure providers to enable scaling from zero-sized node groups in the Opt-in Autoscaling from Zero enhancement. As defined in the enhancement, each provider may add support for scaling from zero to their provider, but they are not required to do so. If you are expecting built-in support for scaling from zero, please check with the Cluster API infrastructure providers that you are using.

If your Cluster API provider does not have support for scaling from zero, you may still use this feature through the capacity annotations. You may add these annotations to your MachineDeployments, or MachineSets if you are not using MachineDeployments (it is not needed on both), to instruct the cluster autoscaler about the sizing of the nodes in the node group. At the minimum, you must specify the CPU and memory annotations, these annotations should match the expected capacity of the nodes created from the infrastructure.

For example, if my MachineDeployment will create nodes that have “16000m” CPU, “128G” memory, “100Gi” ephemeral disk storage, 2 NVidia GPUs, and can support 200 max pods, the following annotations will instruct the autoscaler how to expand the node group from zero replicas:

apiVersion: cluster.x-k8s.io/v1alpha4
kind: MachineDeployment
metadata:
  annotations:
    cluster.x-k8s.io/cluster-api-autoscaler-node-group-max-size: "5"
    cluster.x-k8s.io/cluster-api-autoscaler-node-group-min-size: "0"
    capacity.cluster-autoscaler.kubernetes.io/memory: "128G"
    capacity.cluster-autoscaler.kubernetes.io/cpu: "16"
    capacity.cluster-autoscaler.kubernetes.io/ephemeral-disk: "100Gi"
    capacity.cluster-autoscaler.kubernetes.io/gpu-type: "nvidia.com/gpu"
    capacity.cluster-autoscaler.kubernetes.io/gpu-count: "2"
    capacity.cluster-autoscaler.kubernetes.io/maxPods: "200"

Note the maxPods annotation will default to 110 if it is not supplied. This value is inspired by the Kubernetes best practices Considerations for large clusters.

RBAC changes for scaling from zero

If you are using the opt-in support for scaling from zero as defined by the Cluster API infrastructure provider, you will need to add the infrastructure machine template types to your role permissions for the service account associated with the cluster autoscaler deployment. The service account will need permission to get and list the infrastructure machine templates for your infrastructure provider.

For example, when using the Kubemark provider you will need to set the following permissions:

rules:
  - apiGroups:
    - infrastructure.cluster.x-k8s.io
    resources:
    - kubemarkmachinetemplates
    verbs:
    - get
    - list

Pre-defined labels and taints on nodes scaled from zero

To provide labels or taint information for scale from zero, the optional capacity annotations may be supplied as a comma separated list, as demonstrated in the example below:

apiVersion: cluster.x-k8s.io/v1alpha4
kind: MachineDeployment
metadata:
  annotations:
    cluster.x-k8s.io/cluster-api-autoscaler-node-group-max-size: "5"
    cluster.x-k8s.io/cluster-api-autoscaler-node-group-min-size: "0"
    capacity.cluster-autoscaler.kubernetes.io/memory: "128G"
    capacity.cluster-autoscaler.kubernetes.io/cpu: "16"
    capacity.cluster-autoscaler.kubernetes.io/labels: "key1=value1,key2=value2"
    capacity.cluster-autoscaler.kubernetes.io/taints: "key1=value1:NoSchedule,key2=value2:NoExecute"

Specifying a Custom Resource Group

By default all Kubernetes resources consumed by the Cluster API provider will use the group cluster.x-k8s.io, with a dynamically acquired version. In some situations, such as testing or prototyping, you may wish to change this group variable. For these situations you may use the environment variable CAPI_GROUP to change the group that the provider will use.

Please note that setting the CAPI_GROUP environment variable will also cause the annotations for minimum and maximum size to change. This behavior will also affect the machine annotation on nodes, the machine deletion annotation, and the cluster name label. For example, if CAPI_GROUP=test.k8s.io then the minimum size annotation key will be test.k8s.io/cluster-api-autoscaler-node-group-min-size, the machine annotation on nodes will be test.k8s.io/machine, the machine deletion annotation will be test.k8s.io/delete-machine, and the cluster name label will be test.k8s.io/cluster-name.

Specifying a Custom Resource Version

When determining the group version for the Cluster API types, by default the autoscaler will look for the latest version of the group. For example, if MachineDeployments exist in the cluster.x-k8s.io group at versions v1alpha1 and v1beta1, the autoscaler will choose v1beta1.

In some cases it may be desirable to specify which version of the API the cluster autoscaler should use. This can be useful in debugging scenarios, or in situations where you have deployed multiple API versions and wish to ensure that the autoscaler uses a specific version.

Setting the CAPI_VERSION environment variable will instruct the autoscaler to use the version specified. This works in a similar fashion as the API group environment variable with the exception that there is no default value. When this variable is not set, the autoscaler will use the behavior described above.

Sample manifest

A sample manifest that will create a deployment running the autoscaler is available. It can be deployed by passing it through envsubst, providing these environment variables to set the namespace to deploy into as well as the image and tag to use:

export AUTOSCALER_NS=kube-system
export AUTOSCALER_IMAGE=us.gcr.io/k8s-artifacts-prod/autoscaling/cluster-autoscaler:v1.20.0
envsubst < examples/deployment.yaml | kubectl apply -f-

A note on permissions

The cluster-autoscaler-management role for accessing cluster api scalable resources is scoped to ClusterRole. This may not be ideal for all environments (eg. Multi tenant environments). In such cases, it is recommended to scope it to a Role mapped to a specific namespace.

Autoscaling with ClusterClass and Managed Topologies

For users using ClusterClass and Managed Topologies the Cluster Topology controller attempts to set MachineDeployment replicas based on the spec.topology.workers.machineDeployments[].replicas field. In order to use the Cluster Autoscaler this field can be left unset in the Cluster definition.

The below Cluster definition shows which field to leave unset:

apiVersion: cluster.x-k8s.io/v1beta1
kind: Cluster
metadata:
  name: "my-cluster"
  namespace: default
spec:
  clusterNetwork:
    services:
      cidrBlocks: ["10.128.0.0/12"]
    pods:
      cidrBlocks: ["192.168.0.0/16"]
    serviceDomain: "cluster.local"
  topology:
    class: "quick-start"
    version: v1.24.0
    controlPlane:
      replicas: 1
    workers:
      machineDeployments:
        - class: default-worker
          name: linux
       ## replicas field is not set.
       ## replicas: 1

Warning: If the Autoscaler is enabled and the replicas field is set for a MachineDeployment or MachineSet the Cluster may enter a broken state where replicas become unpredictable.

If the replica field is unset in the Cluster definition Autoscaling can be enabled as described above

Special note on GPU instances

As with other providers, if the device plugin on nodes that provides GPU resources takes some time to advertise the GPU resource to the cluster, this may cause Cluster Autoscaler to unnecessarily scale out multiple times.

To avoid this, you can configure kubelet on your GPU nodes to label the node before it joins the cluster by passing it the --node-labels flag. For the CAPI cloudprovider, the label format is as follows:

cluster-api/accelerator=<gpu-type>

<gpu-type> is arbitrary.

It is important to note that if you are using the --gpu-total flag to limit the number of GPU resources in your cluster that the <gpu-type> value must match between the command line flag and the node labels. Setting these values incorrectly can lead to the autoscaler creating too many GPU resources.

For example, if you are using the autoscaler command line flag --gpu-total=gfx-hardware:1:2 to limit the number of gfx-hardware resources to a minimum of 1 and maximum of 2, then you should use the kubelet node label flag --node-labels=cluster-api/accelerator=gfx-hardware.

Special note on balancing similar node groups

The Cluster Autoscaler feature to enable balancing similar node groups (activated with the --balance-similar-node-groups flag) is a powerful and popular feature. When enabled, the Cluster Autoscaler will attempt to create new nodes by adding them in a manner that balances the creation between similar node groups. With Cluster API, these node groups correspond directly to the scalable resources associated (usually MachineDeployments and MachineSets) with the nodes in question. In order for the nodes of these scalable resources to be considered similar by the Cluster Autoscaler, they must have the same capacity, labels, and taints for the nodes which will be created from them.

To help assist the Cluster Autoscaler in determining which node groups are similar, the command line flags --balancing-ignore-label and --balancing-label are provided. For an expanded discussion about balancing similar node groups and the options which are available, please see the Cluster Autoscaler FAQ.

Because Cluster API can address many different cloud providers, it is important to configure the balancing labels to ignore provider-specific labels which are used for carrying zonal information on Kubernetes nodes. The Cluster Autoscaler implementation for Cluster API does not assume any labels (aside from the well-known Kubernetes labels) to be ignored when running. Users must configure their Cluster Autoscaler deployment to ignore labels which might be different between nodes, but which do not otherwise affect node behavior or size (for example when two MachineDeployments are the same except for their deployment zones). The Cluster API community has decided not to carry cloud provider specific labels in the Cluster Autoscaler to reduce the possibility for labels to clash between providers. Additionally, the community has agreed to promote documentation and the use of the --balancing-ignore-label flag as the preferred method of deployment to reduce the extended need for maintenance on the Cluster Autoscaler when new providers are added or updated. For further context around this decision, please see the Cluster API Deep Dive into Cluster Autoscaler Node Group Balancing discussion from 2022-09-12.

The following table shows some of the most common labels used by cloud providers to designate regional or zonal information on Kubernetes nodes. It is shared here as a reference for users who might be deploying on these infrastructures.

Configure a MachineHealthCheck

Prerequisites

Before attempting to configure a MachineHealthCheck, you should have a working management cluster with at least one MachineDeployment or MachineSet deployed.

What is a MachineHealthCheck?

A MachineHealthCheck is a resource within the Cluster API which allows users to define conditions under which Machines within a Cluster should be considered unhealthy. A MachineHealthCheck is defined on a management cluster and scoped to a particular workload cluster.

When defining a MachineHealthCheck, users specify a timeout for each of the conditions that they define to check on the Machine’s Node. If any of these conditions are met for the duration of the timeout, the Machine will be remediated. By default, the action of remediating a Machine should trigger a new Machine to be created to replace the failed one, but providers are allowed to plug in more sophisticated external remediation solutions.

Creating a MachineHealthCheck

Use the following example as a basis for creating a MachineHealthCheck for worker nodes:

apiVersion: cluster.x-k8s.io/v1beta1
kind: MachineHealthCheck
metadata:
  name: capi-quickstart-node-unhealthy-5m
spec:
  # clusterName is required to associate this MachineHealthCheck with a particular cluster
  clusterName: capi-quickstart
  # (Optional) maxUnhealthy prevents further remediation if the cluster is already partially unhealthy
  maxUnhealthy: 40%
  # (Optional) nodeStartupTimeout determines how long a MachineHealthCheck should wait for
  # a Node to join the cluster, before considering a Machine unhealthy.
  # Defaults to 10 minutes if not specified.
  # Set to 0 to disable the node startup timeout.
  # Disabling this timeout will prevent a Machine from being considered unhealthy when
  # the Node it created has not yet registered with the cluster. This can be useful when
  # Nodes take a long time to start up or when you only want condition based checks for
  # Machine health.
  nodeStartupTimeout: 10m
  # selector is used to determine which Machines should be health checked
  selector:
    matchLabels:
      nodepool: nodepool-0
  # Conditions to check on Nodes for matched Machines, if any condition is matched for the duration of its timeout, the Machine is considered unhealthy
  unhealthyConditions:
  - type: Ready
    status: Unknown
    timeout: 300s
  - type: Ready
    status: "False"
    timeout: 300s

Use this example as the basis for defining a MachineHealthCheck for control plane nodes managed via the KubeadmControlPlane:

apiVersion: cluster.x-k8s.io/v1beta1
kind: MachineHealthCheck
metadata:
  name: capi-quickstart-kcp-unhealthy-5m
spec:
  clusterName: capi-quickstart
  maxUnhealthy: 100%
  selector:
    matchLabels:
      cluster.x-k8s.io/control-plane: ""
  unhealthyConditions:
    - type: Ready
      status: Unknown
      timeout: 300s
    - type: Ready
      status: "False"
      timeout: 300s

Remediation Short-Circuiting

To ensure that MachineHealthChecks only remediate Machines when the cluster is healthy, short-circuiting is implemented to prevent further remediation via the maxUnhealthy and unhealthyRange fields within the MachineHealthCheck spec.

Max Unhealthy

If the user defines a value for the maxUnhealthy field (either an absolute number or a percentage of the total Machines checked by this MachineHealthCheck), before remediating any Machines, the MachineHealthCheck will compare the value of maxUnhealthy with the number of Machines it has determined to be unhealthy. If the number of unhealthy Machines exceeds the limit set by maxUnhealthy, remediation will not be performed.

With an Absolute Value

If maxUnhealthy is set to 2:

• If 2 or fewer nodes are unhealthy, remediation will be performed
• If 3 or more nodes are unhealthy, remediation will not be performed

These values are independent of how many Machines are being checked by the MachineHealthCheck.

With Percentages

If maxUnhealthy is set to 40% and there are 25 Machines being checked:

• If 10 or fewer nodes are unhealthy, remediation will be performed
• If 11 or more nodes are unhealthy, remediation will not be performed

If maxUnhealthy is set to 40% and there are 6 Machines being checked:

• If 2 or fewer nodes are unhealthy, remediation will be performed
• If 3 or more nodes are unhealthy, remediation will not be performed

Note, when the percentage is not a whole number, the allowed number is rounded down.

Unhealthy Range

If the user defines a value for the unhealthyRange field (bracketed values that specify a start and an end value), before remediating any Machines, the MachineHealthCheck will check if the number of Machines it has determined to be unhealthy is within the range specified by unhealthyRange. If it is not within the range set by unhealthyRange, remediation will not be performed.

With a range of values

If unhealthyRange is set to [3-5] and there are 10 Machines being checked:

• If 2 or fewer nodes are unhealthy, remediation will not be performed.
• If 5 or more nodes are unhealthy, remediation will not be performed.
• In all other cases, remediation will be performed.

Note, the above example had 10 machines as sample set. But, this would work the same way for any other number. This is useful for dynamically scaling clusters where the number of machines keep changing frequently.

Skipping Remediation

There are scenarios where remediation for a machine may be undesirable (eg. during cluster migration using clustrctl move). For such cases, MachineHealthCheck provides 2 mechanisms to skip machines for remediation.

Implicit skipping when the resource is paused (using cluster.x-k8s.io/paused annotation):

• When a cluster is paused, none of the machines in that cluster are considered for remediation.
• When a machine is paused, only that machine is not considered for remediation.
• A cluster or a machine is usually paused automatically by Cluster API when it detects a migration.

Explicit skipping using cluster.x-k8s.io/skip-remediation annotation:

• Users can also skip any machine for remediation by setting the cluster.x-k8s.io/skip-remediation for that machine.

Limitations and Caveats of a MachineHealthCheck

Before deploying a MachineHealthCheck, please familiarise yourself with the following limitations and caveats:

• Only Machines owned by a MachineSet or a KubeadmControlPlane can be remediated by a MachineHealthCheck (since a MachineDeployment uses a MachineSet, then this includes Machines that are part of a MachineDeployment)
• Machines managed by a KubeadmControlPlane are remediated according to the delete-and-recreate guidelines described in the KubeadmControlPlane proposal
• If the Node for a Machine is removed from the cluster, a MachineHealthCheck will consider this Machine unhealthy and remediate it immediately
• If no Node joins the cluster for a Machine after the NodeStartupTimeout, the Machine will be remediated
• If a Machine fails for any reason (if the FailureReason is set), the Machine will be remediated immediately

Experimental Features

Cluster API now ships with a new experimental package that lives under the exp/ directory. This is a temporary location for features which will be moved to their permanent locations after graduation. Users can experiment with these features by enabling them using feature gates.

Enabling Experimental Features for Management Clusters Started with clusterctl

Users can enable/disable features by setting OS environment variables before running clusterctl init, e.g.:

export EXP_CLUSTER_RESOURCE_SET=true

clusterctl init --infrastructure vsphere

As an alternative to environment variables, it is also possible to set variables in the clusterctl config file located at $HOME/.cluster-api/clusterctl.yaml, e.g.:

# Values for environment variable substitution
EXP_CLUSTER_RESOURCE_SET: "true"

In case a variable is defined in both the config file and as an OS environment variable, the environment variable takes precedence. For more information on how to set variables for clusterctl, see clusterctl Configuration File

Some features like MachinePools may require infrastructure providers to implement a separate CRD that handles the infrastructure side of the feature too. For such a feature to work, infrastructure providers should also enable their controllers if it is implemented as a feature. If it is not implemented as a feature, no additional step is necessary. As an example, Cluster API Provider Azure (CAPZ) has support for MachinePool through the infrastructure type AzureMachinePool.

Enabling Experimental Features for e2e Tests

One way is to set experimental variables on the clusterctl config file. For CAPI, these configs are under ./test/e2e/config/... such as docker.yaml:

variables:
  EXP_CLUSTER_RESOURCE_SET: "true"
  EXP_MACHINE_POOL: "true"
  CLUSTER_TOPOLOGY: "true"
  EXP_RUNTIME_SDK: "true"

Another way is to set them as environmental variables before running e2e tests.

Enabling Experimental Features on Tilt

On development environments started with Tilt, features can be enabled by setting the feature variables in kustomize_substitutions, e.g.:

kustomize_substitutions:
  EXP_CLUSTER_RESOURCE_SET: 'true'
  EXP_MACHINE_POOL: 'true'
  CLUSTER_TOPOLOGY: 'true'
  EXP_RUNTIME_SDK: 'true'

For more details on setting up a development environment with tilt, see Developing Cluster API with Tilt

Enabling Experimental Features on Existing Management Clusters

To enable/disable features on existing management clusters, users can modify CAPI controller manager deployment which will restart all controllers with requested features.

kubectl edit -n capi-system deployment.apps/capi-controller-manager

// Enable/disable available feautures by modifying Args below.
    Args:
      --leader-elect
      --feature-gates=MachinePool=true,ClusterResourceSet=true

Similarly, to validate if a particular feature is enabled, see cluster-api-provider deployment arguments by:

kubectl describe -n capi-system deployment.apps/capi-controller-manager

Active Experimental Features

• MachinePools
• ClusterResourceSet
• ClusterClass
• Ignition Bootstrap configuration
• Runtime SDK

Warning: Experimental features are unreliable, i.e., some may one day be promoted to the main repository, or they may be modified arbitrarily or even disappear altogether. In short, they are not subject to any compatibility or deprecation promise.

Experimental Feature: MachinePool (alpha)

The MachinePool feature provides a way to manage a set of machines by defining a common configuration, number of desired machine replicas etc. similar to MachineDeployment, except MachineSet controllers are responsible for the lifecycle management of the machines for MachineDeployment, whereas in MachinePools, each infrastructure provider has a specific solution for orchestrating these Machines.

Feature gate name: MachinePool

Variable name to enable/disable the feature gate: EXP_MACHINE_POOL

Infrastructure providers can support this feature by implementing their specific MachinePool such as AzureMachinePool.

More details on MachinePool can be found at: MachinePool CAEP

For developer docs on the MachinePool controller, see here.

Experimental Feature: ClusterResourceSet (alpha)

The ClusterResourceSet feature is introduced to provide a way to automatically apply a set of resources (such as CNI/CSI) defined by users to matching newly-created/existing clusters.

Feature gate name: ClusterResourceSet

Variable name to enable/disable the feature gate: EXP_CLUSTER_RESOURCE_SET

More details on ClusterResourceSet and an example to test it can be found at: ClusterResourceSet CAEP

Experimental Feature: ClusterClass (alpha)

The ClusterClass feature introduces a new way to create clusters which reduces boilerplate and enables flexible and powerful customization of clusters. ClusterClass is a powerful abstraction implemented on top of existing interfaces and offers a set of tools and operations to streamline cluster lifecycle management while maintaining the same underlying API.

Feature gate name: ClusterTopology

Variable name to enable/disable the feature gate: CLUSTER_TOPOLOGY

Additional documentation:

• Background information: ClusterClass and Managed Topologies CAEP
• For ClusterClass authors:
  • Writing a ClusterClass
  • Changing a ClusterClass
  • Publishing a ClusterClass for clusterctl usage: clusterctl Provider contract
• For Cluster operators:
  • Creating a Cluster: Quick Start guide Please note that the experience for creating a Cluster using ClusterClass is very similar to the one for creating a standalone Cluster. Infrastructure providers supporting ClusterClass provide Cluster templates leveraging this feature (e.g the Docker infrastructure provider has a development-topology template).
  • Operating a managed Cluster
  • Planning topology rollouts: clusterctl alpha topology plan

Writing a ClusterClass

A ClusterClass becomes more useful and valuable when it can be used to create many Cluster of a similar shape. The goal of this document is to explain how ClusterClasses can be written in a way that they are flexible enough to be used in as many Clusters as possible by supporting variants of the same base Cluster shape.

Table of Contents

• Basic ClusterClass
• ClusterClass with MachineHealthChecks
• ClusterClass with patches
• Advanced features of ClusterClass with patches
  • MachineDeployment variable overrides
  • Builtin variables
  • Complex variable types
  • Using variable values in JSON patches
  • Optional patches
  • Version-aware patches
• JSON patches tips & tricks

Basic ClusterClass

The following example shows a basic ClusterClass. It contains templates to shape the control plane, infrastructure and workers of a Cluster. When a Cluster is using this ClusterClass, the templates are used to generate the objects of the managed topology of the Cluster.

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: docker-clusterclass-v0.1.0
spec:
  controlPlane:
    ref:
      apiVersion: controlplane.cluster.x-k8s.io/v1beta1
      kind: KubeadmControlPlaneTemplate
      name: docker-clusterclass-v0.1.0
      namespace: default
    machineInfrastructure:
      ref:
        kind: DockerMachineTemplate
        apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
        name: docker-clusterclass-v0.1.0
        namespace: default
  infrastructure:
    ref:
      apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
      kind: DockerClusterTemplate
      name: docker-clusterclass-v0.1.0-control-plane
      namespace: default
  workers:
    machineDeployments:
    - class: default-worker
      template:
        bootstrap:
          ref:
            apiVersion: bootstrap.cluster.x-k8s.io/v1beta1
            kind: KubeadmConfigTemplate
            name: docker-clusterclass-v0.1.0-default-worker
            namespace: default
        infrastructure:
          ref:
            apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
            kind: DockerMachineTemplate
            name: docker-clusterclass-v0.1.0-default-worker
            namespace: default

The following example shows a Cluster using this ClusterClass. In this case a KubeadmControlPlane with the corresponding DockerMachineTemplate, a DockerCluster and a MachineDeployment with the corresponding KubeadmConfigTemplate and DockerMachineTemplate will be created. This basic ClusterClass is already very flexible. Via the topology on the Cluster the following can be configured:

• .spec.topology.version: the Kubernetes version of the Cluster
• .spec.topology.controlPlane: ControlPlane replicas and their metadata
• .spec.topology.workers: MachineDeployments and their replicas, metadata and failure domain

apiVersion: cluster.x-k8s.io/v1beta1
kind: Cluster
metadata:
  name: my-docker-cluster
spec:
  topology:
    class: docker-clusterclass
    version: v1.22.4
    controlPlane:
      replicas: 3
      metadata:
        labels:
          cpLabel: cpLabelValue 
        annotations:
          cpAnnotation: cpAnnotationValue
    workers:
      machineDeployments:
      - class: default-worker
        name: md-0
        replicas: 4
        metadata:
          labels:
            mdLabel: mdLabelValue
          annotations:
            mdAnnotation: mdAnnotationValue
        failureDomain: region

Best practices:

• The ClusterClass name should be generic enough to make sense across multiple clusters, i.e. a name which corresponds to a single Cluster, e.g. “my-cluster”, is not recommended.
• Try to keep the ClusterClass names short and consistent (if you publish multiple ClusterClasses).
• As a ClusterClass usually evolves over time and you might want to rebase Clusters from one version of a ClusterClass to another, consider including a version suffix in the ClusterClass name. For more information about changing a ClusterClass please see: Changing a ClusterClass.
• Prefix the templates used in a ClusterClass with the name of the ClusterClass.
• Don’t reuse the same template in multiple ClusterClasses. This is automatically taken care of by prefixing the templates with the name of the ClusterClass.

ClusterClass with MachineHealthChecks

MachineHealthChecks can be configured in the ClusterClass for the control plane and for a MachineDeployment class. The following configuration makes sure a MachineHealthCheck is created for the control plane and for every MachineDeployment using the default-worker class.

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: docker-clusterclass-v0.1.0
spec:
  controlPlane:
    ...
    machineHealthCheck:
      maxUnhealthy: 33%
      nodeStartupTimeout: 15m
      unhealthyConditions:
      - type: Ready
        status: Unknown
        timeout: 300s
      - type: Ready
        status: "False"
        timeout: 300s
  workers:
    machineDeployments:
    - class: default-worker
      ...
      machineHealthCheck:
        unhealthyRange: "[0-2]"
        nodeStartupTimeout: 10m
        unhealthyConditions:
        - type: Ready
          status: Unknown
          timeout: 300s
        - type: Ready
          status: "False"
          timeout: 300s

ClusterClass with patches

As shown above, basic ClusterClasses are already very powerful. But there are cases where more powerful mechanisms are required. Let’s assume you want to manage multiple Clusters with the same ClusterClass, but they require different values for a field in one of the referenced templates of a ClusterClass.

A concrete example would be to deploy Clusters with different registries. In this case, every cluster needs a Cluster-specific value for .spec.kubeadmConfigSpec.clusterConfiguration.imageRepository in KubeadmControlPlane. Use cases like this can be implemented with ClusterClass patches.

Defining variables in the ClusterClass

The following example shows how variables can be defined in the ClusterClass. A variable definition specifies the name and the schema of a variable and if it is required. The schema defines how a variable is defaulted and validated. It supports a subset of the schema of CRDs. For more information please see the godoc.

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: docker-clusterclass-v0.1.0
spec:
  ...
  variables:
  - name: imageRepository
    required: true
    schema:
      openAPIV3Schema:
        type: string
        description: ImageRepository is the container registry to pull images from.
        default: registry.k8s.io
        example: registry.k8s.io

Defining patches in the ClusterClass

The variable can then be used in a patch to set a field on a template referenced in the ClusterClass. The selector specifies on which template the patch should be applied. jsonPatches specifies which JSON patches should be applied to that template. In this case we set the imageRepository field of the KubeadmControlPlaneTemplate to the value of the variable imageRepository. For more information please see the godoc.

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: docker-clusterclass-v0.1.0
spec:
  ...
  patches:
  - name: imageRepository
    definitions:
    - selector:
        apiVersion: controlplane.cluster.x-k8s.io/v1beta1
        kind: KubeadmControlPlaneTemplate
        matchResources:
          controlPlane: true
      jsonPatches:
      - op: add
        path: /spec/template/spec/kubeadmConfigSpec/clusterConfiguration/imageRepository
        valueFrom:
          variable: imageRepository

Setting variable values in the Cluster

After creating a ClusterClass with a variable definition, the user can now provide a value for the variable in the Cluster as in the example below.

apiVersion: cluster.x-k8s.io/v1beta1
kind: Cluster
metadata:
  name: my-docker-cluster
spec:
  topology:
    ...
    variables:
    - name: imageRepository
      value: my.custom.registry

Advanced features of ClusterClass with patches

This section will explain more advanced features of ClusterClass patches.

MachineDeployment variable overrides

If you want to use many variations of MachineDeployments in Clusters, you can either define a MachineDeployment class for every variation or you can define patches and variables to make a single MachineDeployment class more flexible.

In the following example we make the instanceType of a AWSMachineTemplate customizable. First we define the workerMachineType variable and the corresponding patch:

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: aws-clusterclass-v0.1.0
spec:
  ...
  variables:
  - name: workerMachineType
    required: true
    schema:
      openAPIV3Schema:
        type: string
        default: t3.large
  patches:
  - name: workerMachineType
    definitions:
    - selector:
        apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
        kind: AWSMachineTemplate
        matchResources:
          machineDeploymentClass:
            names:
            - default-worker
      jsonPatches:
      - op: add
        path: /spec/template/spec/instanceType
        valueFrom:
          variable: workerMachineType
---
apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
kind: AWSMachineTemplate
metadata:
  name: aws-clusterclass-v0.1.0-default-worker
spec:
  template:
    spec:
      # instanceType: workerMachineType will be set by the patch.
      iamInstanceProfile: "nodes.cluster-api-provider-aws.sigs.k8s.io"
---
...

In the Cluster resource the workerMachineType variable can then be set cluster-wide and it can also be overridden for an individual MachineDeployment.

apiVersion: cluster.x-k8s.io/v1beta1
kind: Cluster
metadata:
  name: my-aws-cluster
spec:
  ...
  topology:
    class: aws-clusterclass-v0.1.0
    version: v1.22.0
    controlPlane:
      replicas: 3
    workers:
      machineDeployments:
      - class: "default-worker"
        name: "md-small-workers"
        replicas: 3
        variables:
          overrides:
          # Overrides the cluster-wide value with t3.small.
          - name: workerMachineType
            value: t3.small
      # Uses the cluster-wide value t3.large.
      - class: "default-worker"
        name: "md-large-workers"
        replicas: 3
    variables:
    - name: workerMachineType
      value: t3.large

Builtin variables

In addition to variables specified in the ClusterClass, the following builtin variables can be referenced in patches:

• builtin.cluster.{name,namespace}
• builtin.cluster.topology.{version,class}
• builtin.cluster.network.{serviceDomain,services,pods,ipFamily}
• builtin.controlPlane.{replicas,version,name}
  • Please note, these variables are only available when patching control plane or control plane machine templates.
• builtin.controlPlane.machineTemplate.infrastructureRef.name
  • Please note, these variables are only available when using a control plane with machines and when patching control plane or control plane machine templates.
• builtin.machineDeployment.{replicas,version,class,name,topologyName}
  • Please note, these variables are only available when patching the templates of a MachineDeployment and contain the values of the current MachineDeployment topology.
• builtin.machineDeployment.{infrastructureRef.name,bootstrap.configRef.name}
  • Please note, these variables are only available when patching the templates of a MachineDeployment and contain the values of the current MachineDeployment topology.

Builtin variables can be referenced just like regular variables, e.g.:

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: docker-clusterclass-v0.1.0
spec:
  ...
  patches:
  - name: clusterName
    definitions:
    - selector:
      ...
      jsonPatches:
      - op: add
        path: /spec/template/spec/kubeadmConfigSpec/clusterConfiguration/controllerManager/extraArgs/cluster-name
        valueFrom:
          variable: builtin.cluster.name

Tips & Tricks

Builtin variables can be used to dynamically calculate image names. The version used in the patch will always be the same as the one we set in the corresponding MachineDeployment (works the same way with .builtin.controlPlane.version).

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: docker-clusterclass-v0.1.0
spec:
  ...
  patches:
  - name: customImage
    description: "Sets the container image that is used for running dockerMachines."
    definitions:
    - selector:
        apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
        kind: DockerMachineTemplate
        matchResources:
          machineDeploymentClass:
            names:
            - default-worker
      jsonPatches:
      - op: add
        path: /spec/template/spec/customImage
        valueFrom:
          template: |
            kindest/node:{{ .builtin.machineDeployment.version }}

Complex variable types

Variables can also be objects, maps and arrays. An object is specified with the type object and by the schemas of the fields of the object. A map is specified with the type object and the schema of the map values. An array is specified via the type array and the schema of the array items.

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: docker-clusterclass-v0.1.0
spec:
  ...
  variables:
  - name: httpProxy
    schema:
      openAPIV3Schema:
        type: object
        properties: 
          # Schema of the url field.
          url: 
            type: string
          # Schema of the noProxy field.
          noProxy:
            type: string
  - name: mdConfig
    schema:
      openAPIV3Schema:
        type: object
        additionalProperties:
          # Schema of the map values.
          type: object
          properties:
            osImage:
              type: string
  - name: dnsServers
    schema:
      openAPIV3Schema:
        type: array
        items:
          # Schema of the array items.
          type: string

Objects, maps and arrays can be used in patches either directly by referencing the variable name, or by accessing individual fields. For example:

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: docker-clusterclass-v0.1.0
spec:
  ...
  jsonPatches:
  - op: add
    path: /spec/template/spec/httpProxy/url
    valueFrom:
      # Use the url field of the httpProxy variable.
      variable: httpProxy.url
  - op: add
    path: /spec/template/spec/customImage
    valueFrom:
      # Use the osImage field of the mdConfig variable for the current MD class.
      template: "{{ (index .mdConfig .builtin.machineDeployment.class).osImage }}"
  - op: add
    path: /spec/template/spec/dnsServers
    valueFrom:
      # Use the entire dnsServers array.
      variable: dnsServers
  - op: add
    path: /spec/template/spec/dnsServer
    valueFrom:
      # Use the first item of the dnsServers array.
      variable: dnsServers[0]

Tips & Tricks

Complex variables can be used to make references in templates configurable, e.g. the identityRef used in AzureCluster. Of course it’s also possible to only make the name of the reference configurable, including restricting the valid values to a pre-defined enum.

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: azure-clusterclass-v0.1.0
spec:
  ...
  variables:
  - name: clusterIdentityRef
    schema:
      openAPIV3Schema:
        type: object
        properties:
          kind:
            type: string
          name:
            type: string

Even if OpenAPI schema allows defining free form objects, e.g.

variables:
  - name: freeFormObject
    schema:
      openAPIV3Schema:
        type: object

User should be aware that the lack of the validation of users provided data could lead to problems when those values are used in patch or when the generated templates are created (see e.g. 6135).

As a consequence we recommend avoiding this practice while we are considering alternatives to make it explicit for the ClusterClass authors to opt-in in this feature, thus accepting the implied risks.

Using variable values in JSON patches

We already saw above that it’s possible to use variable values in JSON patches. It’s also possible to calculate values via Go templating or to use hard-coded values.

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: docker-clusterclass-v0.1.0
spec:
  ...
  patches:
  - name: etcdImageTag
    definitions:
    - selector:
      ...
      jsonPatches:
      - op: add
        path: /spec/template/spec/kubeadmConfigSpec/clusterConfiguration/etcd
        valueFrom:
          # This template is first rendered with Go templating, then parsed by 
          # a YAML/JSON parser and then used as value of the JSON patch.
          # For example, if the variable etcdImageTag is set to `3.5.1-0` the 
          # .../clusterConfiguration/etcd field will be set to:
          # {"local": {"imageTag": "3.5.1-0"}}
          template: |
            local:
              imageTag: {{ .etcdImageTag }}
  - name: imageRepository
    definitions:
    - selector:
      ...
      jsonPatches:
      - op: add
        path: /spec/template/spec/kubeadmConfigSpec/clusterConfiguration/imageRepository
        # This hard-coded value is used directly as value of the JSON patch.
        value: "my.custom.registry"

Tips & Tricks

Templates can be used to implement defaulting behavior during JSON patch value calculation. This can be used if the simple constant default value which can be specified in the schema is not enough.

        valueFrom:
          # If .vnetName is set, it is used. Otherwise, we will use `{{.builtin.cluster.name}}-vnet`.  
          template: "{{ if .vnetName }}{{.vnetName}}{{else}}{{.builtin.cluster.name}}-vnet{{end}}"

When writing templates, a subset of functions from the sprig library can be used to write expressions like e.g. {{ .name | upper }}. Only functions that are guaranteed to evaluate to the same result for a given input are allowed (e.g. upper or max can be used, while now or randAlpha can not be used).

Optional patches

Patches can also be conditionally enabled. This can be done by configuring a Go template via enabledIf. The patch is then only applied if the Go template evaluates to true. In the following example the httpProxy patch is only applied if the httpProxy variable is set (and not empty).

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: docker-clusterclass-v0.1.0
spec:
  ...
  variables:
  - name: httpProxy
    schema:
      openAPIV3Schema:
        type: string
  patches:
  - name: httpProxy
    enabledIf: "{{ if .httpProxy }}true{{end}}"
    definitions:
    ...  

Tips & Tricks:

Hard-coded values can be used to test the impact of a patch during development, gradually roll out patches, etc. .

    enabledIf: false

A boolean variable can be used to enable/disable a patch (or “feature”). This can have opt-in or opt-out behavior depending on the default value of the variable.

    enabledIf: "{{ .httpProxyEnabled }}"

Of course the same is possible by adding a boolean variable to a configuration object.

    enabledIf: "{{ .httpProxy.enabled }}"

Builtin variables can be leveraged to apply a patch only for a specific Kubernetes version.

    enabledIf: '{{ semverCompare "1.21.1" .builtin.controlPlane.version }}'

With semverCompare and coalesce a feature can be enabled in newer versions of Kubernetes for both KubeadmConfigTemplate and KubeadmControlPlane.

    enabledIf: '{{ semverCompare "^1.22.0" (coalesce .builtin.controlPlane.version .builtin.machineDeployment.version )}}'

Version-aware patches

In some cases the ClusterClass authors want a patch to be computed according to the Kubernetes version in use.

While this is not a problem “per se” and it does not differ from writing any other patch, it is important to keep in mind that there could be different Kubernetes version in a Cluster at any time, all of them accessible via built in variables:

• builtin.cluster.topology.version defines the Kubernetes version from cluster.topology, and it acts as the desired Kubernetes version for the entire cluster. However, during an upgrade workflow it could happen that some objects in the Cluster are still at the older version.
• builtin.controlPlane.version, represent the desired version for the control plane object; usually this version changes immediately after cluster.topology.version is updated (unless there are other operations in progress preventing the upgrade to start).
• builtin.machineDeployment.version, represent the desired version for each specific MachineDeployment object; this version changes only after the upgrade for the control plane is completed, and in case of many MachineDeployments in the same cluster, they are upgraded sequentially.

This info should provide the bases for developing version-aware patches, allowing the patch author to determine when a patch should adapt to the new Kubernetes version by choosing one of the above variables. In practice the following rules applies to the most common use cases:

• When developing a version-aware patch for the control plane, builtin.controlPlane.version must be used.
• When developing a version-aware patch for MachineDeployments, builtin.machineDeployment.version must be used.

Tips & Tricks:

Sometimes users need to define variables to be used by version-aware patches, and in this case it is important to keep in mind that there could be different Kubernetes versions in a Cluster at any time.

A simple approach to solve this problem is to define a map of version-aware variables, with the key of each item being the Kubernetes version. Patch could then use the proper builtin variables as a lookup entry to fetch the corresponding values for the Kubernetes version in use by each object.

JSON patches tips & tricks

JSON patches specification RFC6902 requires that the target of add operation must exist.

As a consequence ClusterClass authors should pay special attention when the following conditions apply in order to prevent errors when a patch is applied:

• the patch tries to add a value to an array (which is a slice in the corresponding go struct)
• the slice was defined with omitempty
• the slice currently does not exist

A workaround in this particular case is to create the array in the patch instead of adding to the non-existing one. When creating the slice, existing values would be overwritten so this should only be used when it does not exist.

The following example shows both cases to consider while writing a patch for adding a value to a slice. This patch targets to add a file to the files slice of a KubeadmConfigTemplate which has omitempty set.

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: my-clusterclass
spec:
  ...
  patches:
  - name: add file
    definitions:
    - selector:
        apiVersion: bootstrap.cluster.x-k8s.io/v1beta1
        kind: KubeadmConfigTemplate
      jsonPatches:
      - op: add
        path: /spec/template/spec/files/-
        value:
          content: Some content.
          path: /some/file
---
apiVersion: bootstrap.cluster.x-k8s.io/v1beta1
kind: KubeadmConfigTemplate
metadata:
  name: "quick-start-default-worker-bootstraptemplate"
spec:
  template:
    spec:
      ...
      files:
      - content: Some other content
        path: /some/other/file

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: my-clusterclass
spec:
  ...
  patches:
  - name: add file
    definitions:
    - selector:
        apiVersion: bootstrap.cluster.x-k8s.io/v1beta1
        kind: KubeadmConfigTemplate
      jsonPatches:
      - op: add
        path: /spec/template/spec/files
        value:
        - content: Some content.
          path: /some/file
---
apiVersion: bootstrap.cluster.x-k8s.io/v1beta1
kind: KubeadmConfigTemplate
metadata:
  name: "quick-start-default-worker-bootstraptemplate"
spec:
  template:
    spec:
      ...

Changing a ClusterClass

Selecting a strategy

When planning a change to a ClusterClass, users should always take into consideration how those changes might impact the existing Clusters already using the ClusterClass, if any.

There are two strategies for defining how a ClusterClass change rolls out to existing Clusters:

• Roll out ClusterClass changes to existing Cluster in a controlled/incremental fashion.
• Roll out ClusterClass changes to all the existing Cluster immediately.

The first strategy is the recommended choice for people starting with ClusterClass; it requires the users to create a new ClusterClass with the expected changes, and then rebase each Cluster to use the newly created ClusterClass.

By splitting the change to the ClusterClass and its rollout to Clusters into separate steps the user will reduce the risk of introducing unexpected changes on existing Clusters, or at least limit the blast radius of those changes to a small number of Clusters already rebased (in fact it is similar to a canary deployment).

The second strategy listed above instead requires changing a ClusterClass “in place”, which can be simpler and faster than creating a new ClusterClass. However, this approach means that changes are immediately propagated to all the Clusters already using the modified ClusterClass. Any operation involving many Clusters at the same time has intrinsic risks, and it can impact heavily on the underlying infrastructure in case the operation triggers machine rollout across the entire fleet of Clusters.

However, regardless of which strategy you are choosing to implement your changes to a ClusterClass, please make sure to:

• Plan ClusterClass changes before applying them.
• Understand what Compatibility Checks are and how to prevent changes that can lead to non-functional Clusters.

If instead you are interested in understanding more about which kind of
effects you should expect on the Clusters, or if you are interested in additional details about the internals of the topology reconciler you can start reading the notes in the Plan ClusterClass changes documentation or looking at the reference documentation at the end of this page.

Changing ClusterClass templates

Templates are an integral part of a ClusterClass, and thus the same considerations described in the previous paragraph apply. When changing a template referenced in a ClusterClass users should also always plan for how the change should be propagated to the existing Clusters and choose the strategy that best suits expectations.

According to the Cluster API operational practices, the recommended way for updating templates is by template rotation:

• Create a new template
• Update the template reference in the ClusterClass
• Delete the old template

Also in case of changes to the ClusterClass templates, please make sure to:

• Plan ClusterClass changes before applying them.
• Understand what Compatibility Checks are and how to prevent changes that can lead to non-functional Clusters.

You can learn more about this reading the notes in the Plan ClusterClass changes documentation or looking at the reference documentation at the end of this page.

Rebase

Rebasing is an operational practice for transitioning a Cluster from one ClusterClass to another, and the operation can be triggered by simply changing the value in Cluster.spec.topology.class.

Also in this case, please make sure to:

• Plan ClusterClass changes before applying them.
• Understand what Compatibility Checks are and how to prevent changes that can lead to non-functional Clusters.

You can learn more about this reading the notes in the Plan ClusterClass changes documentation or looking at the reference documentation at the end of this page.

Compatibility Checks

When changing a ClusterClass, the system validates the required changes according to a set of “compatibility rules” in order to prevent changes which would lead to a non-functional Cluster, e.g. changing the InfrastructureProvider from AWS to Azure.

If the proposed changes are evaluated as dangerous, the operation is rejected.

For additional info see compatibility rules defined in the ClusterClass proposal.

Planning ClusterClass changes

It is highly recommended to always generate a plan for ClusterClass changes before applying them, no matter if you are creating a new ClusterClass and rebasing Clusters or if you are changing your ClusterClass in place.

The clusterctl tool provides a new alpha command for this operation, clusterctl alpha topology plan.

The output of this command will provide you all the details about how those changes would impact Clusters, but the following notes can help you to understand what you should expect when planning your ClusterClass changes:

• Users should expect the resources in a Cluster (e.g. MachineDeployments) to behave consistently no matter if a change is applied via a ClusterClass or directly as you do in a Cluster without a ClusterClass. In other words, if someone changes something on a KCP object triggering a control plane Machines rollout, you should expect the same to happen when the same change is applied to the KCP template in ClusterClass.

• User should expect the Cluster topology to change consistently irrespective of how the change has been implemented inside the ClusterClass; in other words, if you change a template field “in place”, if you rotate the template referenced in the ClusterClass by pointing to a new template with the same field changed, or if you change the same field via a patch, the effects on the Cluster are the same.

• Users should expect the Cluster topology to change consistently irrespective of how the change has been applied to the ClusterClass. In other words, if you change a template field “in place”, or if you rotate the template referenced in the ClusterClass by pointing to a new template with the same field changed, or if you change the same field via a patch, the effects on the Cluster are the same.

See reference for more details.

Reference

Effects on the Clusters

The following table documents the effects each ClusterClass change can have on a Cluster; Similar considerations apply to changes introduced by changes in Cluster.Topology or by changes introduced by patches.

NOTE: for people used to operating Cluster API without Cluster Class, it could also help to keep in mind that the underlying objects like control plane and MachineDeployment act in the same way with and without a ClusterClass.

How the topology controller reconciles template fields

The topology reconciler enforces values defined in the ClusterClass templates into the topology owned objects in a Cluster.

More specifically, the topology controller uses Server Side Apply to write/patch topology owned objects; using SSA allows other controllers to co-author the generated objects, like e.g. adding info for subnets in CAPA.

A corollary of the behaviour described above is that it is technically possible to change fields in the object which are not derived from the templates and patches, but we advise against using the possibility or making ad-hoc changes in generated objects unless otherwise needed for a workaround. It is always preferable to improve ClusterClasses by supporting new Cluster variants in a reusable way.

Operating a managed Cluster

The spec.topology field added to the Cluster object as part of ClusterClass allows changes made on the Cluster to be propagated across all relevant objects. This means the Cluster object can be used as a single point of control for making changes to objects that are part of the Cluster, including the ControlPlane and MachineDeployments.

A managed Cluster can be used to:

• Upgrade a Cluster
• Scale a ControlPlane
• Scale a MachineDeployment
• Add a MachineDeployment
• Use variables in a Cluster
• Rebase a Cluster to a different ClusterClass
• Upgrading Cluster API
• Tips and tricks

Upgrade a Cluster

Using a managed topology the operation to upgrade a Kubernetes cluster is a one-touch operation. Let’s assume we have created a CAPD cluster with ClusterClass and specified Kubernetes v1.21.2 (as documented in the Quick Start guide). Specifying the version is done when running clusterctl generate cluster. Looking at the cluster, the version of the control plane and the MachineDeployments is v1.21.2.

> kubectl get kubeadmcontrolplane,machinedeployments

NAME                                                                              CLUSTER                   INITIALIZED   API SERVER AVAILABLE   REPLICAS   READY   UPDATED   UNAVAILABLE   AGE     VERSION
kubeadmcontrolplane.controlplane.cluster.x-k8s.io/clusterclass-quickstart-XXXX    clusterclass-quickstart   true          true                   1          1       1         0             2m21s   v1.21.2

NAME                                                                             CLUSTER                   REPLICAS   READY   UPDATED   UNAVAILABLE   PHASE     AGE     VERSION
machinedeployment.cluster.x-k8s.io/clusterclass-quickstart-linux-workers-XXXX    clusterclass-quickstart   1          1       1         0             Running   2m21s   v1.21.2

To update the Cluster the only change needed is to the version field under spec.topology in the Cluster object.

Change 1.21.2 to 1.22.0 as below.

kubectl patch cluster clusterclass-quickstart --type json --patch '[{"op": "replace", "path": "/spec/topology/version", "value": "v1.22.0"}]'

The patch will make the following change to the Cluster yaml:

   spec:
     topology:
      class: quick-start
+     version: v1.22.0
-     version: v1.21.2 

Important Note: A +2 minor Kubernetes version upgrade is not allowed in Cluster Topologies. This is to align with existing control plane providers, like KubeadmControlPlane provider, that limit a +2 minor version upgrade. Example: Upgrading from 1.21.2 to 1.23.0 is not allowed.

The upgrade will take some time to roll out as it will take place machine by machine with older versions of the machines only being removed after healthy newer versions come online.

To watch the update progress run:

watch kubectl get kubeadmcontrolplane,machinedeployments

After a few minutes the upgrade will be complete and the output will be similar to:

NAME                                                                              CLUSTER                   INITIALIZED   API SERVER AVAILABLE   REPLICAS   READY   UPDATED   UNAVAILABLE   AGE     VERSION
kubeadmcontrolplane.controlplane.cluster.x-k8s.io/clusterclass-quickstart-XXXX    clusterclass-quickstart   true          true                   1          1       1         0             7m29s   v1.22.0

NAME                                                                             CLUSTER                   REPLICAS   READY   UPDATED   UNAVAILABLE   PHASE     AGE     VERSION
machinedeployment.cluster.x-k8s.io/clusterclass-quickstart-linux-workers-XXXX    clusterclass-quickstart   1          1       1         0             Running   7m29s   v1.22.0

Scale a MachineDeployment

When using a managed topology scaling of MachineDeployments, both up and down, should be done through the Cluster topology.

Assume we have created a CAPD cluster with ClusterClass and Kubernetes v1.23.3 (as documented in the Quick Start guide). Initially we should have a MachineDeployment with 3 replicas. Running

kubectl get machinedeployments

Will give us:

NAME                                                            CLUSTER           REPLICAS   READY   UPDATED   UNAVAILABLE   PHASE     AGE   VERSION
machinedeployment.cluster.x-k8s.io/capi-quickstart-md-0-XXXX   capi-quickstart   3          3       3         0             Running   21m   v1.23.3

We can scale up or down this MachineDeployment through the Cluster object by changing the replicas field under /spec/topology/workers/machineDeployments/0/replicas The 0 in the path refers to the position of the target MachineDeployment in the list of our Cluster topology. As we only have one MachineDeployment we’re targeting the first item in the list under /spec/topology/workers/machineDeployments/.

To change this value with a patch:

kubectl  patch cluster capi-quickstart --type json --patch '[{"op": "replace", "path": "/spec/topology/workers/machineDeployments/0/replicas",  "value": 1}]'

This patch will make the following changes on the Cluster yaml:

   spec:
     topology:
       workers:
         machineDeployments:
         - class: default-worker
           name: md-0
           metadata: {}
+          replicas: 1
-          replicas: 3

After a minute the MachineDeployment will have scaled down to 1 replica:

NAME                         CLUSTER           REPLICAS   READY   UPDATED   UNAVAILABLE   PHASE     AGE   VERSION
capi-quickstart-md-0-XXXXX  capi-quickstart   1          1       1         0             Running   25m   v1.23.3

As well as scaling a MachineDeployment, Cluster operators can edit the labels and annotations applied to a running MachineDeployment using the Cluster topology as a single point of control.

Add a MachineDeployment

MachineDeployments in a managed Cluster are defined in the Cluster’s topology. Cluster operators can add a MachineDeployment to a living Cluster by adding it to the cluster.spec.topology.workers.machineDeployments field.

Assume we have created a CAPD cluster with ClusterClass and Kubernetes v1.23.3 (as documented in the Quick Start guide). Initially we should have a single MachineDeployment with 3 replicas. Running

kubectl get machinedeployments

Will give us:

NAME                                                            CLUSTER           REPLICAS   READY   UPDATED   UNAVAILABLE   PHASE     AGE   VERSION
machinedeployment.cluster.x-k8s.io/capi-quickstart-md-0-XXXX   capi-quickstart   3          3       3         0             Running   21m   v1.23.3

A new MachineDeployment can be added to the Cluster by adding a new MachineDeployment spec under /spec/topology/workers/machineDeployments/. To do so we can patch our Cluster with:

kubectl  patch cluster capi-quickstart --type json --patch '[{"op": "add", "path": "/spec/topology/workers/machineDeployments/-",  "value": {"name": "second-deployment", "replicas": 1, "class": "default-worker"} }]'

This patch will make the below changes on the Cluster yaml:

   spec:
     topology:
       workers:
         machineDeployments:
         - class: default-worker
           metadata: {}
           replicas: 3
           name: md-0
+        - class: default-worker
+          metadata: {}
+          replicas: 1
+          name: second-deployment

After a minute to scale the new MachineDeployment we get:

NAME                                      CLUSTER           REPLICAS   READY   UPDATED   UNAVAILABLE   PHASE     AGE   VERSION
capi-quickstart-md-0-XXXX                 capi-quickstart   1          1       1         0             Running   39m   v1.23.3
capi-quickstart-second-deployment-XXXX    capi-quickstart   1          1       1         0             Running   99s   v1.23.3

Our second deployment uses the same underlying MachineDeployment class default-worker as our initial deployment. In this case they will both have exactly the same underlying machine templates. In order to modify the templates MachineDeployments are based on take a look at Changing a ClusterClass.

A similar process as that described here - removing the MachineDeployment from cluster.spec.topology.workers.machineDeployments - can be used to delete a running MachineDeployment from an active Cluster.

Scale a ControlPlane

When using a managed topology scaling of ControlPlane Machines, where the Cluster is using a topology that includes ControlPlane MachineInfrastructure, should be done through the Cluster topology.

This is done by changing the ControlPlane replicas field at /spec/topology/controlPlane/replica in the Cluster object. The command is:

kubectl  patch cluster capi-quickstart --type json --patch '[{"op": "replace", "path": "/spec/topology/controlPlane/replicas",  "value": 1}]'

This patch will make the below changes on the Cluster yaml:

   spec:
      topology:
        controlPlane:
          metadata: {}
+         replicas: 1
-         replicas: 3

As well as scaling a ControlPlane, Cluster operators can edit the labels and annotations applied to a running ControlPlane using the Cluster topology as a single point of control.

Use variables

A ClusterClass can use variables and patches in order to allow flexible customization of Clusters derived from a ClusterClass. Variable definition allows two or more Cluster topologies derived from the same ClusterClass to have different specs, with the differences controlled by variables in the Cluster topology.

Assume we have created a CAPD cluster with ClusterClass and Kubernetes v1.23.3 (as documented in the Quick Start guide). Our Cluster has a variable etcdImageTag as defined in the ClusterClass. The variable is not set on our Cluster. Some variables, depending on their definition in a ClusterClass, may need to be specified by the Cluster operator for every Cluster created using a given ClusterClass.

In order to specify the value of a variable all we have to do is set the value in the Cluster topology.

We can see the current unset variable with:

kubectl get cluster capi-quickstart -o jsonpath='{.spec.topology.variables[1]}'                                     

Which will return something like:

{"name":"etcdImageTag","value":""}

In order to run a different version of etcd in new ControlPlane machines - the part of the spec this variable sets - change the value using the below patch:

kubectl  patch cluster capi-quickstart --type json --patch '[{"op": "replace", "path": "/spec/topology/variables/1/value",  "value": "3.5.0"}]'

Running the patch makes the following change to the Cluster yaml:

   spec:
     topology:
       variables:
       - name: imageRepository
         value: registry.k8s.io
       - name: etcdImageTag
         value: ""
       - name: coreDNSImageTag
+        value: "3.5.0"
-        value: ""

Retrieving the variable value from the Cluster object, with kubectl get cluster capi-quickstart -o jsonpath='{.spec.topology.variables[1]}' we can see:

{"name":"etcdImageTag","value":"3.5.0"}

Note: Changing the etcd version may have unintended impacts on a running Cluster. For safety the cluster should be reapplied after running the above variable patch.

Rebase a Cluster

To perform more significant changes using a Cluster as a single point of control, it may be necessary to change the ClusterClass that the Cluster is based on. This is done by changing the class referenced in /spec/topology/class.

To read more about changing an underlying class please refer to ClusterClass rebase.

Tips and tricks

Users should always aim at ensuring the stability of the Cluster and of the applications hosted on it while using spec.topology as a single point of control for making changes to the objects that are part of the Cluster.

Following recommendation apply:

• If possible, avoid concurrent changes to control-plane and/or MachineDeployments to prevent excessive turnover on the underlying infrastructure or bottlenecks in the Cluster trying to move workloads from one machine to the other.
• Keep machine labels and annotation stable, because changing those values requires machines rollouts; also, please note that machine labels and annotation are not propagated to Kubernetes nodes; see metadata propagation.
• While upgrading a Cluster, if possible avoid any other concurrent change to the Cluster; please note that you can rely on version-aware patches to ensure the Cluster adapts to the new Kubernetes version in sync with the upgrade workflow.

For more details about how changes can affect a Cluster, please look at reference.

Upgrading Cluster API

There are some special considerations for ClusterClass regarding Cluster API upgrades when the upgrade includes a bump of the apiVersion of infrastructure, bootstrap or control plane provider CRDs.

The recommended approach is to first upgrade Cluster API and then update the apiVersions in the ClusterClass references afterwards. By following above steps, there won’t be any disruptions of the reconciliation as the Cluster topology controller is able to reconcile the Cluster even with the old apiVersions in the ClusterClass.

Note: The apiVersions in ClusterClass cannot be updated before Cluster API because the new apiVersions don’t exist in the management cluster before the Cluster API upgrade.

In general the Cluster topology controller always uses exactly the versions of the CRDs referenced in the ClusterClass. This means in the following example the Cluster topology controller will always use v1beta1 when reconciling/applying patches for the infrastructure ref, even if the DockerClusterTemplate already has a v1beta2 apiVersion.

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: quick-start
  namespace: default
spec:
  infrastructure:
    ref:
      apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
      kind: DockerClusterTemplate
...

Experimental Feature: Runtime SDK (alpha)

The Runtime SDK feature provides an extensibility mechanism that allows systems, products, and services built on top of Cluster API to hook into a workload cluster’s lifecycle.

Feature gate name: RuntimeSDK

Variable name to enable/disable the feature gate: EXP_RUNTIME_SDK

Additional documentation:

• Background information:
  • Runtime SDK CAEP
  • Topology Mutation Hook CAEP
  • Runtime Hooks for Add-on Management CAEP
• For Runtime Extension developers:
  • Implementing Runtime Extensions
  • Implementing Lifecycle Hook Extensions
  • Implementing Topology Mutation Hook Extensions
• For Cluster operators:
  • Deploying Runtime Extensions

Implementing Runtime Extensions

Introduction

As a developer building systems on top of Cluster API, if you want to hook into the Cluster’s lifecycle via a Runtime Hook, you have to implement a Runtime Extension handling requests according to the OpenAPI specification for the Runtime Hook you are interested in.

Runtime Extensions by design are very powerful and flexible, however given that with great power comes great responsibility, a few key consideration should always be kept in mind (more details in the following sections):

• Runtime Extensions are components that should be designed, written and deployed with great caution given that they can affect the proper functioning of the Cluster API runtime.
• Cluster administrators should carefully vet any Runtime Extension registration, thus preventing malicious components from being added to the system.

Please note that following similar practices is already commonly accepted in the Kubernetes ecosystem for Kubernetes API server admission webhooks. Runtime Extensions share the same foundation and most of the same considerations/concerns apply.

Implementation

As mentioned above as a developer building systems on top of Cluster API, if you want to hook in the Cluster’s lifecycle via a Runtime Extension, you have to implement an HTTPS server handling a discovery request and a set of additional requests according to the OpenAPI specification for the Runtime Hook you are interested in.

The following shows a minimal example of a Runtime Extension server implementation:

package main

import (
	"context"
	"flag"
	"net/http"
	"os"

	"github.com/spf13/pflag"
	cliflag "k8s.io/component-base/cli/flag"
	"k8s.io/component-base/logs"
	"k8s.io/klog/v2"
	"k8s.io/utils/pointer"
	ctrl "sigs.k8s.io/controller-runtime"

	runtimecatalog "sigs.k8s.io/cluster-api/exp/runtime/catalog"
	runtimehooksv1 "sigs.k8s.io/cluster-api/exp/runtime/hooks/api/v1alpha1"
	"sigs.k8s.io/cluster-api/exp/runtime/server"
)

var (
	catalog  = runtimecatalog.New()
	setupLog = ctrl.Log.WithName("setup")

	// Flags.
	profilerAddress string
	webhookPort     int
	webhookCertDir  string
	logOptions      = logs.NewOptions()
)

func init() {
	// Register the Runtime Hook types into the catalog.
	_ = runtimehooksv1.AddToCatalog(catalog)
}

// InitFlags initializes the flags.
func InitFlags(fs *pflag.FlagSet) {
	logs.AddFlags(fs, logs.SkipLoggingConfigurationFlags())
	logOptions.AddFlags(fs)

	fs.StringVar(&profilerAddress, "profiler-address", "",
		"Bind address to expose the pprof profiler (e.g. localhost:6060)")

	fs.IntVar(&webhookPort, "webhook-port", 9443,
		"Webhook Server port")

	fs.StringVar(&webhookCertDir, "webhook-cert-dir", "/tmp/k8s-webhook-server/serving-certs/",
		"Webhook cert dir, only used when webhook-port is specified.")
}

func main() {
	InitFlags(pflag.CommandLine)
	pflag.CommandLine.SetNormalizeFunc(cliflag.WordSepNormalizeFunc)
	pflag.CommandLine.AddGoFlagSet(flag.CommandLine)
	pflag.Parse()

	if err := logOptions.ValidateAndApply(nil); err != nil {
		setupLog.Error(err, "unable to start extension")
		os.Exit(1)
	}

	// klog.Background will automatically use the right logger.
	ctrl.SetLogger(klog.Background())

	if profilerAddress != "" {
		klog.Infof("Profiler listening for requests at %s", profilerAddress)
		go func() {
			klog.Info(http.ListenAndServe(profilerAddress, nil))
		}()
	}

	ctx := ctrl.SetupSignalHandler()

	webhookServer, err := server.NewServer(server.Options{
		Catalog: catalog,
		Port:    webhookPort,
		CertDir: webhookCertDir,
	})
	if err != nil {
		setupLog.Error(err, "error creating webhook server")
		os.Exit(1)
	}

	// Register extension handlers.
	if err := webhookServer.AddExtensionHandler(server.ExtensionHandler{
		Hook:           runtimehooksv1.BeforeClusterCreate,
		Name:           "before-cluster-create",
		HandlerFunc:    DoBeforeClusterCreate,
		TimeoutSeconds: pointer.Int32(5),
		FailurePolicy:  toPtr(runtimehooksv1.FailurePolicyFail),
	}); err != nil {
		setupLog.Error(err, "error adding handler")
		os.Exit(1)
	}
	if err := webhookServer.AddExtensionHandler(server.ExtensionHandler{
		Hook:           runtimehooksv1.BeforeClusterUpgrade,
		Name:           "before-cluster-upgrade",
		HandlerFunc:    DoBeforeClusterUpgrade,
		TimeoutSeconds: pointer.Int32(5),
		FailurePolicy:  toPtr(runtimehooksv1.FailurePolicyFail),
	}); err != nil {
		setupLog.Error(err, "error adding handler")
		os.Exit(1)
	}

	setupLog.Info("Starting Runtime Extension server")
	if err := webhookServer.Start(ctx); err != nil {
		setupLog.Error(err, "error running webhook server")
		os.Exit(1)
	}
}

func DoBeforeClusterCreate(ctx context.Context, request *runtimehooksv1.BeforeClusterCreateRequest, response *runtimehooksv1.BeforeClusterCreateResponse) {
	log := ctrl.LoggerFrom(ctx)
	log.Info("BeforeClusterCreate is called")
	// Your implementation
}

func DoBeforeClusterUpgrade(ctx context.Context, request *runtimehooksv1.BeforeClusterUpgradeRequest, response *runtimehooksv1.BeforeClusterUpgradeResponse) {
	log := ctrl.LoggerFrom(ctx)
	log.Info("BeforeClusterUpgrade is called")
	// Your implementation
}

func toPtr(f runtimehooksv1.FailurePolicy) *runtimehooksv1.FailurePolicy {
	return &f
}

For a full example see our test extension.

Please note that a Runtime Extension server can serve multiple Runtime Hooks (in the example above BeforeClusterCreate and BeforeClusterUpgrade) at the same time. Each of them are handled at a different path, like the Kubernetes API server does for different API resources. The exact format of those paths is handled by the server automatically in accordance to the OpenAPI specification of the Runtime Hooks.

There is an additional Discovery endpoint which is automatically served by the Server. The Discovery endpoint returns a list of extension handlers to inform Cluster API which Runtime Hooks are implemented by this Runtime Extension server.

Please note that Cluster API is only able to enforce the correct request and response types as defined by a Runtime Hook version. Developers are fully responsible for all other elements of the design of a Runtime Extension implementation, including:

• To choose which programming language to use; please note that Golang is the language of choice, and we are not planning to test or provide tooling and libraries for other languages. Nevertheless, given that we rely on Open API and plain HTTPS calls, other languages should just work but support will be provided at best effort.
• To choose if a dedicated or a shared HTTPS Server is used for the Runtime Extension (it can be e.g. also used to serve a metric endpoint).

When using Golang the Runtime Extension developer can benefit from the following packages (provided by the sigs.k8s.io/cluster-api module) as shown in the example above:

• exp/runtime/hooks/api/v1alpha1 contains the Runtime Hook Golang API types, which are also used to generate the OpenAPI specification.
• exp/runtime/catalog provides the Catalog object to register Runtime Hook definitions. The Catalog is then used by the server package to handle requests. Catalog is similar to the runtime.Scheme of the k8s.io/apimachinery/pkg/runtime package, but it is designed to store Runtime Hook registrations.
• exp/runtime/server provides a Server object which makes it easy to implement a Runtime Extension server. The Server will automatically handle tasks like Marshalling/Unmarshalling requests and responses. A Runtime Extension developer only has to implement a strongly typed function that contains the actual logic.

Guidelines

While writing a Runtime Extension the following important guidelines must be considered:

Timeouts

Runtime Extension processing adds to reconcile durations of Cluster API controllers. They should respond to requests as quickly as possible, typically in milliseconds. Runtime Extension developers can decide how long the Cluster API Runtime should wait for a Runtime Extension to respond before treating the call as a failure (max is 30s) by returning the timeout during discovery. Of course a Runtime Extension can trigger long-running tasks in the background, but they shouldn’t block synchronously.

Availability

Runtime Extension failure could result in errors in handling the workload clusters lifecycle, and so the implementation should be robust, have proper error handling, avoid panics, etc.. . Failure policies can be set up to mitigate the negative impact of a Runtime Extension on the Cluster API Runtime, but this option can’t be used in all cases (see Error Management).

Blocking Hooks

A Runtime Hook can be defined as “blocking” - e.g. the BeforeClusterUpgrade hook allows a Runtime Extension to prevent the upgrade from starting. A Runtime Extension registered for the BeforeClusterUpgrade hook can block by returning a non-zero retryAfterSeconds value. Following consideration apply:

• The system might decide to retry the same Runtime Extension even before the retryAfterSeconds period expires, e.g. due to other changes in the Cluster, so retryAfterSeconds should be considered as an approximate maximum time before the next reconcile.
• If there is more than one Runtime Extension registered for the same Runtime Hook and more than one returns retryAfterSeconds, the shortest non-zero value will be used.
• If there is more than one Runtime Extension registered for the same Runtime Hook and at least one returns retryAfterSeconds, all Runtime Extensions will be called again.

Detailed description of what “blocking” means for each specific Runtime Hooks is documented case by case in the hook-specific implementation documentation (e.g. Implementing Lifecycle Hook Runtime Extensions).

Side Effects

It is recommended that Runtime Extensions should avoid side effects if possible, which means they should operate only on the content of the request sent to them, and not make out-of-band changes. If side effects are required, rules defined in the following sections apply.

Idempotence

An idempotent Runtime Extension is able to succeed even in case it has already been completed before (the Runtime Extension checks current state and changes it only if necessary). This is necessary because a Runtime Extension may be called many times after it already succeeded because other Runtime Extensions for the same hook may not succeed in the same reconcile.

A practical example that explains why idempotence is relevant is the fact that extensions could be called more than once for the same lifecycle transition, e.g.

• Two Runtime Extensions are registered for the BeforeClusterUpgrade hook.
• Before a Cluster upgrade is started both extensions are called, but one of them temporarily blocks the operation by asking to retry after 30 seconds.
• After 30 seconds the system retries the lifecycle transition, and both extensions are called again to re-evaluate if it is now possible to proceed with the Cluster upgrade.

Avoid dependencies

Each Runtime Extension should accomplish its task without depending on other Runtime Extensions. Introducing dependencies across Runtime Extensions makes the system fragile, and it is probably a consequence of poor “Separation of Concerns” between extensions.

Deterministic result

A deterministic Runtime Extension is implemented in such a way that given the same input it will always return the same output.

Some Runtime Hooks, e.g. like external patches, might explicitly request for corresponding Runtime Extensions to support this property. But we encourage developers to follow this pattern more generally given that it fits well with practices like unit testing and generally makes the entire system more predictable and easier to troubleshoot.

Error Management

In case a Runtime Extension returns an error, the error will be handled according to the corresponding failure policy defined in the response of the Discovery call.

If the failure policy is Ignore the error is going to be recorded in the controller’s logs, but the processing will continue. However we recognize that this failure policy cannot be used in most of the use cases because Runtime Extension implementers want to ensure that the task implemented by an extension is completed before continuing with the cluster’s lifecycle.

If instead the failure policy is Fail the system will retry the operation until it passes. The following general considerations apply:

• It is the responsibility of Cluster API components to surface Runtime Extension errors using conditions.
• Operations will be retried with an exponential backoff or whenever the state of a Cluster changes (we are going to rely on controller runtime exponential backoff/watches).
• If there is more than one Runtime Extension registered for the same Runtime Hook and at least one of them fails, all the registered Runtime Extension will be retried. See Idempotence

Additional considerations about errors that apply only to a specific Runtime Hook will be documented in the hook-specific implementation documentation.

Tips & tricks

After you implemented and deployed a Runtime Extension you can manually test it by sending HTTP requests. This can be for example done via kubectl:

Via kubectl create --raw:

# Send a Discovery Request to the webhook-service in namespace default with protocol https on port 443:
kubectl create --raw '/api/v1/namespaces/default/services/https:webhook-service:443/proxy/hooks.runtime.cluster.x-k8s.io/v1alpha1/discovery' \
  -f <(echo '{"apiVersion":"hooks.runtime.cluster.x-k8s.io/v1alpha1","kind":"DiscoveryRequest"}') | jq

Via kubectl proxy and curl:

# Open a proxy with kubectl and then use curl to send the request
## First terminal:
kubectl proxy
## Second terminal:
curl -X 'POST' 'http://127.0.0.1:8001/api/v1/namespaces/default/services/https:webhook-service:443/proxy/hooks.runtime.cluster.x-k8s.io/v1alpha1/discovery' \
  -d '{"apiVersion":"hooks.runtime.cluster.x-k8s.io/v1alpha1","kind":"DiscoveryRequest"}' | jq

For more details about the API of the Runtime Extensions please see Swagger UI.
For more details on proxy support please see Proxies in Kubernetes.

Implementing Lifecycle Hook Runtime Extensions

Introduction

The lifecycle hooks allow hooking into the Cluster lifecycle. The following diagram provides an overview:

Please see the corresponding CAEP for additional background information.

Guidelines

All guidelines defined in Implementing Runtime Extensions apply to the implementation of Runtime Extensions for lifecycle hooks as well.

In summary, Runtime Extensions are components that should be designed, written and deployed with great caution given that they can affect the proper functioning of the Cluster API runtime. A poorly implemented Runtime Extension could potentially block lifecycle transitions from happening.

Following recommendations are especially relevant:

• Blocking and non Blocking
• Error management
• Avoid dependencies

Definitions

BeforeClusterCreate

This hook is called after the Cluster object has been created by the user, immediately before all the objects which are part of a Cluster topology(*) are going to be created. Runtime Extension implementers can use this hook to determine/prepare add-ons for the Cluster and block the creation of those objects until everything is ready.

Example Request:

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: BeforeClusterCreateRequest
cluster:
  apiVersion: cluster.x-k8s.io/v1beta1
  kind: Cluster
  metadata:
   name: test-cluster
   namespace: test-ns
  spec:
   ...
  status:
   ...

Example Response:

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: BeforeClusterCreateResponse
status: Success # or Failure
message: "error message if status == Failure"
retryAfterSeconds: 10

For additional details, you can see the full schema in Swagger UI.

(*) The objects which are part of a Cluster topology are the infrastructure Cluster, the Control Plane, the MachineDeployments and the templates derived from the ClusterClass.

AfterControlPlaneInitialized

This hook is called after the Control Plane for the Cluster is marked as available for the first time. Runtime Extension implementers can use this hook to execute tasks, for example component installation on workload clusters, that are only possible once the Control Plane is available. This hook does not block any further changes to the Cluster.

Example Request:

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: AfterControlPlaneInitializedRequest
cluster:
  apiVersion: cluster.x-k8s.io/v1beta1
  kind: Cluster
  metadata:
   name: test-cluster
   namespace: test-ns
  spec:
   ...
  status:
   ...

Example Response:

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: AfterControlPlaneInitializedResponse
status: Success # or Failure
message: "error message if status == Failure"

For additional details, you can see the full schema in Swagger UI.

BeforeClusterUpgrade

This hook is called after the Cluster object has been updated with a new spec.topology.version by the user, and immediately before the new version is going to be propagated to the control plane (*). Runtime Extension implementers can use this hook to execute pre-upgrade add-on tasks and block upgrades of the ControlPlane and Workers.

Example Request:

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: BeforeClusterUpgradeRequest
cluster:
  apiVersion: cluster.x-k8s.io/v1beta1
  kind: Cluster
  metadata:
   name: test-cluster
   namespace: test-ns
  spec:
   ...
  status:
   ...
fromKubernetesVersion: "v1.21.2"
toKubernetesVersion: "v1.22.0"

Example Response:

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: BeforeClusterUpgradeResponse
status: Success # or Failure
message: "error message if status == Failure"
retryAfterSeconds: 10

For additional details, you can see the full schema in Swagger UI.

(*) Under normal circumstances spec.topology.version gets propagated to the control plane immediately; however if previous upgrades or worker machine rollouts are still in progress, the system waits for those operations to complete before starting the new upgrade.

AfterControlPlaneUpgrade

This hook is called after the control plane has been upgraded to the version specified in spec.topology.version, and immediately before the new version is going to be propagated to the MachineDeployments of the Cluster. Runtime Extension implementers can use this hook to execute post-upgrade add-on tasks and block upgrades to workers until everything is ready.

Example Request:

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: AfterControlPlaneUpgradeRequest
cluster:
  apiVersion: cluster.x-k8s.io/v1beta1
  kind: Cluster
  metadata:
   name: test-cluster
   namespace: test-ns
  spec:
   ...
  status:
   ...
kubernetesVersion: "v1.22.0"

Example Response:

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: AfterControlPlaneUpgradeResponse
status: Success # or Failure
message: "error message if status == Failure"
retryAfterSeconds: 10

For additional details, you can see the full schema in Swagger UI.

AfterClusterUpgrade

This hook is called after the Cluster, control plane and workers have been upgraded to the version specified in spec.topology.version. Runtime Extensions implementers can use this hook to execute post-upgrade add-on tasks. This hook does not block any further changes or upgrades to the Cluster.

Example Request:

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: AfterClusterUpgradeRequest
cluster:
  apiVersion: cluster.x-k8s.io/v1beta1
  kind: Cluster
  metadata:
   name: test-cluster
   namespace: test-ns
  spec:
   ...
  status:
   ...
kubernetesVersion: "v1.22.0"

Example Response:

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: AfterClusterUpgradeResponse
status: Success # or Failure
message: "error message if status == Failure"

For additional details, refer to the Draft OpenAPI spec.

BeforeClusterDelete

This hook is called after the Cluster deletion has been triggered by the user and immediately before the topology of the Cluster is going to be deleted. Runtime Extension implementers can use this hook to execute cleanup tasks for the add-ons and block deletion of the Cluster and descendant objects until everything is ready.

Example Request:

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: BeforeClusterDeleteRequest
cluster:
  apiVersion: cluster.x-k8s.io/v1beta1
  kind: Cluster
  metadata:
   name: test-cluster
   namespace: test-ns
  spec:
   ...
  status:
   ...

Example Response:

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: BeforeClusterDeleteResponse
status: Success # or Failure
message: "error message if status == Failure"
retryAfterSeconds: 10

For additional details, you can see the full schema in Swagger UI.

Implementing Topology Mutation Hook Runtime Extensions

Introduction

The Topology Mutation Hooks are going to be called during each Cluster topology reconciliation. More specifically we are going to call two different hooks for each reconciliation:

• GeneratePatches: GeneratePatches is responsible for generating patches for the entire Cluster topology.
• ValidateTopology: ValidateTopology is called after all patches have been applied and thus allow to validate the resulting objects.

Please see the corresponding CAEP for additional background information.

Inline vs. external patches

Inline patches have the following advantages:

• Inline patches are easier when getting started with ClusterClass as they are built into the Cluster API core controller, no external component have to be developed and managed.

External patches have the following advantages:

• External patches can be individually written, unit tested and released/versioned.
• External patches can leverage the full feature set of a programming language and are thus not limited to the capabilities of JSON patches and Go templating.
• External patches can use external data (e.g. from cloud APIs) during patch generation.
• External patches can be easily reused across ClusterClasses.

Using one or multiple external patch extensions

Some considerations:

• In general a single external patch extension is simpler than many, as only one extension then has to be built, deployed and managed.
• A single extension also requires less HTTP round-trips between the CAPI controller and the extension(s).
• With a single extension it is still possible to implement multiple logical features using different variables.
• When implementing multiple logical features in one extension it’s recommended that they can be conditionally enabled/disabled via variables (either via certain values or by their existence).
• Conway’s law might make it not feasible in large organizations to use a single extension. In those cases it’s important that boundaries between extensions are clearly defined.

Guidelines

For general Runtime Extension developer guidelines please refer to the guidelines in Implementing Runtime Extensions. This section outlines considerations specific to Topology Mutation hooks:

• Input validation: An External Patch Extension must always validate its input, i.e. it must validate that all variables exist, have the right type and it must validate the kind and apiVersion of the templates which should be patched.
• Timeouts: As External Patch Extensions are called during each Cluster topology reconciliation, they must respond as fast as possible (<=200ms) to avoid delaying individual reconciles and congestion.
• Availability: An External Patch Extension must be always available, otherwise Cluster topologies won’t be reconciled anymore.
• Side Effects: An External Patch Extension must not make out-of-band changes. If necessary external data can be retrieved, but be aware of performance impact.
• Deterministic results: For a given request (a set of templates and variables) an External Patch Extension must always return the same response (a set of patches). Otherwise the Cluster topology will never reach a stable state.
• Idempotence: An External Patch Extension must only return patches if changes to the templates are required, i.e. unnecessary patches when the template is already in the desired state must be avoided.
• Avoid Dependencies: An External Patch Extension must be independent of other External Patch Extensions. However if dependencies cannot be avoided, it is possible to control the order in which patches are executed via the ClusterClass.

Definitions

GeneratePatches

A GeneratePatches call generates patches for the entire Cluster topology. Accordingly the request contains all templates, the global variables and the template-specific variables. The response contains generated patches.

Example request:

• Generating patches for a Cluster topology is done via a single call to allow External Patch Extensions a holistic view of the entire Cluster topology. Additionally this allows us to reduce the number of round-trips.
• Each item in the request will contain the template as a raw object. Additionally information about where the template is used is provided via holderReference.

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: GeneratePatchesRequest
variables:
- name: <variable-name>
  value: <variable-value>
  ...
items:
- uid: 7091de79-e26c-4af5-8be3-071bc4b102c9
  holderReference:
    apiVersion: cluster.x-k8s.io/v1beta1
    kind: MachineDeployment
    namespace: default
    name: cluster-md1-xyz
    fieldPath: spec.template.spec.infrastructureRef
  object:
    apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
    kind: AWSMachineTemplate
    spec:
    ...
  variables:
  - name: <variable-name>
    value: <variable-value>
    ...

Example Response:

• The response contains patches instead of full objects to reduce the payload.
• Templates in the request and patches in the response will be correlated via UIDs.
• Like inline patches, external patches are only allowed to change fields in spec.template.spec.

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: GeneratePatchesResponse
status: Success # or Failure
message: "error message if status == Failure"
items:
- uid: 7091de79-e26c-4af5-8be3-071bc4b102c9
  patchType: JSONPatch
  patch: <JSON-patch>

For additional details, you can see the full schema in Swagger UI.

We are considering to introduce a library to facilitate development of External Patch Extensions. It would provide capabilities like:

• Accessing builtin variables
• Extracting certain templates from a GeneratePatches request (e.g. all bootstrap templates)

If you are interested in contributing to this library please reach out to the maintainer team or feel free to open an issue describing your idea or use case.

ValidateTopology

A ValidateTopology call validates the topology after all patches have been applied. The request contains all templates of the Cluster topology, the global variables and the template-specific variables. The response contains the result of the validation.

Example Request:

• The request is the same as the GeneratePatches request except it doesn’t have uid fields. We don’t need them as we don’t have to correlate patches in the response.

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: ValidateTopologyRequest
variables:
- name: <variable-name>
  value: <variable-value>
  ...
items:
- holderReference:
    apiVersion: cluster.x-k8s.io/v1beta1
    kind: MachineDeployment
    namespace: default
    name: cluster-md1-xyz
    fieldPath: spec.template.spec.infrastructureRef
  object:
    apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
    kind: AWSMachineTemplate
    spec:
    ...
  variables:
  - name: <variable-name>
    value: <variable-value>
    ...

Example Response:

apiVersion: hooks.runtime.cluster.x-k8s.io/v1alpha1
kind: ValidateTopologyResponse
status: Success # or Failure
message: "error message if status == Failure"

For additional details, you can see the full schema in Swagger UI.

Dealing with Cluster API upgrades with apiVersion bumps

There are some special considerations regarding Cluster API upgrades when the upgrade includes a bump of the apiVersion of infrastructure, bootstrap or control plane provider CRDs.

When calling external patches the Cluster topology controller is always sending the templates in the apiVersion of the references in the ClusterClass.

While inline patches are always referring to one specific apiVersion, external patch implementations are more flexible. They can be written in a way that they are able to handle multiple apiVersions of a CRD. This can be done by calculating patches differently depending on which apiVersion is received by the external patch implementation.

This allows users more flexibility during Cluster API upgrades:

Variant 1: External patch implementation supporting two apiVersions at the same time

1. Update Cluster API
2. Update the external patch implementation to be able to handle custom resources with the old and the new apiVersion
3. Update the references in ClusterClasses to use the new apiVersion

Note In this variant it doesn’t matter if Cluster API or the external patch implementation is updated first.

Variant 2: Deploy an additional instance of the external patch implementation which can handle the new apiVersion

1. Upgrade Cluster API
2. Deploy the new external patch implementation which is able to handle the new apiVersion
3. Update ClusterClasses to use the new apiVersion and the new external patch implementation
4. Remove the old external patch implementation as it’s not used anymore

Note In this variant it doesn’t matter if Cluster API is updated or the new external patch implementation is deployed first.

Deploy Runtime Extensions

Cluster API requires that each Runtime Extension must be deployed using an endpoint accessible from the Cluster API controllers. The recommended deployment model is to deploy a Runtime Extension in the management cluster by:

• Packing the Runtime Extension in a container image.
• Using a Kubernetes Deployment to run the above container inside the Management Cluster.
• Using a Cluster IP Service to make the Runtime Extension instances accessible via a stable DNS name.
• Using a cert-manager generated Certificate to protect the endpoint.

For an example, please see our test extension which follows, as closely as possible, the kubebuilder setup used for controllers in Cluster API.

There are a set of important guidelines that must be considered while choosing the deployment method:

Availability

It is recommended that Runtime Extensions should leverage some form of load-balancing, to provide high availability and performance benefits. You can run multiple Runtime Extension servers behind a Kubernetes Service to leverage the load-balancing that services support.

Identity and access management

The security model for each Runtime Extension should be carefully defined, similar to any other application deployed in the Cluster. If the Runtime Extension requires access to the apiserver the deployment must use a dedicated service account with limited RBAC permission. Otherwise no service account should be used.

On top of that, the container image for the Runtime Extension should be carefully designed in order to avoid privilege escalation (e.g using distroless base images). The Pod spec in the Deployment manifest should enforce security best practices (e.g. do not use privileged pods).

Alternative deployments methods

Alternative deployment methods can be used as long as the HTTPs endpoint is accessible, like e.g.:

• deploying the HTTPS Server as a part of another component, e.g. a controller.
• deploying the HTTPS Server outside the Management Cluster.

In those cases recommendations about availability and identity and access management still apply.

Experimental Feature: Ignition Bootstrap Config (alpha)

The default configuration engine for bootstrapping workload cluster machines is cloud-init. Ignition is an alternative engine used by Linux distributions such as Flatcar Container Linux and Fedora CoreOS and therefore should be used when choosing an Ignition-based distribution as the underlying OS for workload clusters.

This guide explains how to deploy an AWS workload cluster using Ignition.

Prerequisites

• kubectl installed locally
• clusterawsadm installed locally - download from the releases page of the AWS provider
• Kind and Docker installed locally (when using Kind to create a management cluster)

Configure a management cluster

Follow this section of the quick start guide to deploy a Kubernetes cluster or connect to an existing one.

Follow this section of the quick start guide to install clusterctl.

Initialize the management cluster

Before workload clusters can be deployed, Cluster API components must be deployed to the management cluster.

Initialize the management cluster:

export AWS_REGION=us-east-1
export AWS_ACCESS_KEY_ID=AKIAIOSFODNN7EXAMPLE
export AWS_SECRET_ACCESS_KEY=wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY

# Workload clusters need to call the AWS API as part of their normal operation.
# The following command creates a CloudFormation stack which provisions the
# necessary IAM resources to be used by workload clusters.
clusterawsadm bootstrap iam create-cloudformation-stack

# The management cluster needs to call the AWS API in order to manage cloud
# resources for workload clusters. The following command tells clusterctl to
# store the AWS credentials provided before in a Kubernetes secret where they
# can be retrieved by the AWS provider running on the management cluster.
export AWS_B64ENCODED_CREDENTIALS=$(clusterawsadm bootstrap credentials encode-as-profile)

# Enable the feature gates controlling Ignition bootstrap.
export EXP_KUBEADM_BOOTSTRAP_FORMAT_IGNITION=true # Used by the kubeadm bootstrap provider
export BOOTSTRAP_FORMAT_IGNITION=true # Used by the AWS provider

# Initialize the management cluster.
clusterctl init --infrastructure aws

Generate a workload cluster configuration

# Deploy the workload cluster in the following AWS region.
export AWS_REGION=us-east-1

# Authorize the following SSH public key on cluster nodes.
export AWS_SSH_KEY_NAME=my-key

# Ignition bootstrap data needs to be stored in an S3 bucket so that nodes can
# read them at boot time. Store Ignition bootstrap data in the following bucket.
export AWS_S3_BUCKET_NAME=my-bucket

# Set the EC2 machine size for controllers and workers.
export AWS_CONTROL_PLANE_MACHINE_TYPE=t3a.small
export AWS_NODE_MACHINE_TYPE=t3a.small

# TODO: Update --from URL once https://github.com/kubernetes-sigs/cluster-api-provider-aws/pull/2271 is merged.
clusterctl generate cluster ignition-cluster \
    --from https://github.com/kubernetes-sigs/cluster-api-provider-aws/blob/e7c89c9add92a4b233b26a1712518d9616d99e7a/templates/cluster-template-flatcar.yaml \
    --kubernetes-version v1.22.2 \
    --worker-machine-count 2 \
    > ignition-cluster.yaml

Apply the workload cluster

kubectl apply -f ignition-cluster.yaml

Wait for the control plane of the workload cluster to become initialized:

kubectl get kubeadmcontrolplane ignition-cluster-control-plane

This could take a while. When the control plane is initialized, the INITIALIZED field should be true:

NAME                             CLUSTER            INITIALIZED   API SERVER AVAILABLE   REPLICAS   READY   UPDATED   UNAVAILABLE   AGE    VERSION
ignition-cluster-control-plane   ignition-cluster   true                                 1                  1         1             7m7s   v1.22.2

Connect to the workload cluster

Generate a kubeconfig for the workload cluster:

clusterctl get kubeconfig ignition-cluster > ./kubeconfig

Set kubectl to use the generated kubeconfig:

export KUBECONFIG=$(pwd)/kubeconfig

Verify connectivity with the workload cluster’s API server:

kubectl cluster-info

Sample output:

Kubernetes control plane is running at https://ignition-cluster-apiserver-284992524.us-east-1.elb.amazonaws.com:6443
CoreDNS is running at https://ignition-cluster-apiserver-284992524.us-east-1.elb.amazonaws.com:6443/api/v1/namespaces/kube-system/services/kube-dns:dns/proxy

To further debug and diagnose cluster problems, use 'kubectl cluster-info dump'.

Deploy a CNI plugin

A CNI plugin must be deployed to the workload cluster for the cluster to become ready. We use Calico here, however other CNI plugins could be used, too.

kubectl apply -f https://docs.projectcalico.org/v3.20/manifests/calico.yaml

Ensure all cluster nodes become ready:

kubectl get nodes

Sample output:

NAME                                            STATUS   ROLES                  AGE   VERSION
ip-10-0-122-154.us-east-1.compute.internal   Ready    control-plane,master   14m   v1.22.2
ip-10-0-127-59.us-east-1.compute.internal    Ready    <none>                 13m   v1.22.2
ip-10-0-89-169.us-east-1.compute.internal    Ready    <none>                 13m   v1.22.2

Clean up

Delete the workload cluster (from a shell connected to the management cluster):

kubectl delete cluster ignition-cluster

Caveats

Supported infrastructure providers

Cluster API has multiple infrastructure providers which can be used to deploy workload clusters.

The following infrastructure providers already have Ignition support:

• AWS

Ignition support will be added to more providers in the future.

Security Guidelines

This section provides security guidelines useful to provision clusters which are secure by default to follow the secure defaults guidelines for cloud native apps.

Pod Security Standards

Pod Security Admission allows applying Pod Security Standards during creation of pods at the cluster level.

The flavor development-topology for the docker provider used in Quick Start already includes a basic Pod Security Standard configuration. It is using ClusterClass variables and patches to inject the configuration.

Adding a basic Pod Security Standards configuration to a ClusterClass

By adding the following variables and patches Pod Security Standards can be added to every ClusterClass which references a Kubeadm based control plane.

Adding the variables to a ClusterClass

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
spec:
  variables:
  - name: podSecurityStandard
    required: false
    schema:
      openAPIV3Schema:
        type: object
        properties: 
          enabled: 
            type: boolean
            default: true
            description: "enabled enables the patches to enable Pod Security Standard via AdmissionConfiguration."
          enforce:
            type: string
            default: "baseline"
            description: "enforce sets the level for the enforce PodSecurityConfiguration mode. One of privileged, baseline, restricted."
            pattern: "privileged|baseline|restricted"
          audit:
            type: string
            default: "restricted"
            description: "audit sets the level for the audit PodSecurityConfiguration mode. One of privileged, baseline, restricted."
            pattern: "privileged|baseline|restricted"
          warn:
            type: string
            default: "restricted"
            description: "warn sets the level for the warn PodSecurityConfiguration mode. One of privileged, baseline, restricted."
            pattern: "privileged|baseline|restricted"
  ...

• The version field in Pod Security Admission Config defaults to latest.
• The kube-system namespace is exempt from Pod Security Standards enforcement, because it runs control-plane pods that need higher privileges.

Adding the patches to a ClusterClass

The following snippet contains the patch to be added to the ClusterClass.

Due to limitations of ClusterClass with patches there are two versions for this patch.

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
spec:
  ...
  patches:
  - name: podSecurityStandard
    description: "Adds an admission configuration for PodSecurity to the kube-apiserver."
    definitions:
    - selector:
        apiVersion: controlplane.cluster.x-k8s.io/v1beta1
        kind: KubeadmControlPlaneTemplate
        matchResources:
          controlPlane: true
      jsonPatches:
      - op: add
        path: "/spec/template/spec/kubeadmConfigSpec/clusterConfiguration/apiServer/extraArgs"
        value:
          admission-control-config-file: "/etc/kubernetes/kube-apiserver-admission-pss.yaml"
      - op: add
        path: "/spec/template/spec/kubeadmConfigSpec/clusterConfiguration/apiServer/extraVolumes/-"
        value:
          name: admission-pss
          hostPath: /etc/kubernetes/kube-apiserver-admission-pss.yaml
          mountPath: /etc/kubernetes/kube-apiserver-admission-pss.yaml
          readOnly: true
          pathType: "File"
      - op: add
        path: "/spec/template/spec/kubeadmConfigSpec/files/-"
        valueFrom:
          template: |
            content: |
              apiVersion: apiserver.config.k8s.io/v1
              kind: AdmissionConfiguration
              plugins:
              - name: PodSecurity
                configuration:
                  apiVersion: pod-security.admission.config.k8s.io/v1beta1
                  kind: PodSecurityConfiguration
                  defaults:
                    enforce: "{{ .podSecurity.enforce }}"
                    enforce-version: "latest"
                    audit: "{{ .podSecurity.audit }}"
                    audit-version: "latest"
                    warn: "{{ .podSecurity.warn }}"
                    warn-version: "latest"
                  exemptions:
                    usernames: []
                    runtimeClasses: []
                    namespaces: [kube-system]
            path: /etc/kubernetes/kube-apiserver-admission-pss.yaml
    enabledIf: "{{ .podSecurityStandard.enabled }}"
...

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
spec:
  ...
  patches:
  - name: podSecurityStandard
    description: "Adds an admission configuration for PodSecurity to the kube-apiserver."
    definitions:
    - selector:
        apiVersion: controlplane.cluster.x-k8s.io/v1beta1
        kind: KubeadmControlPlaneTemplate
        matchResources:
          controlPlane: true
      jsonPatches:
      - op: add
        path: "/spec/template/spec/kubeadmConfigSpec/clusterConfiguration/apiServer/extraArgs"
        value:
          admission-control-config-file: "/etc/kubernetes/kube-apiserver-admission-pss.yaml"
      - op: add
        path: "/spec/template/spec/kubeadmConfigSpec/clusterConfiguration/apiServer/extraVolumes"
        value:
        - name: admission-pss
          hostPath: /etc/kubernetes/kube-apiserver-admission-pss.yaml
          mountPath: /etc/kubernetes/kube-apiserver-admission-pss.yaml
          readOnly: true
          pathType: "File"
      - op: add
        path: "/spec/template/spec/kubeadmConfigSpec/files"
        valueFrom:
          template: |
            - content: |
                apiVersion: apiserver.config.k8s.io/v1
                kind: AdmissionConfiguration
                plugins:
                - name: PodSecurity
                  configuration:
                    apiVersion: pod-security.admission.config.k8s.io/v1beta1
                    kind: PodSecurityConfiguration
                    defaults:
                      enforce: "{{ .podSecurity.enforce }}"
                      enforce-version: "latest"
                      audit: "{{ .podSecurity.audit }}"
                      audit-version: "latest"
                      warn: "{{ .podSecurity.warn }}"
                      warn-version: "latest"
                    exemptions:
                      usernames: []
                      runtimeClasses: []
                      namespaces: [kube-system]
              path: /etc/kubernetes/kube-apiserver-admission-pss.yaml
    enabledIf: "{{ .podSecurityStandard.enabled }}"
...

Create a secure Cluster using the ClusterClass

After adding the variables and patches the Pod Security Standards would be applied by default. It is also possible to disable this patch or configure different levels for the configuration using variables.

apiVersion: cluster.x-k8s.io/v1beta1
kind: Cluster
metadata:
  name: "my-cluster"
spec:
  ...
  topology:
    ...
    class: my-secure-cluster-class
    variables:
    - name: podSecurityStandard
      value: 
        enabled: true
        enforce: "restricted"

Overview of clusterctl

The clusterctl CLI tool handles the lifecycle of a Cluster API management cluster.

The clusterctl command line interface is specifically designed for providing a simple “day 1 experience” and a quick start with Cluster API. It automates fetching the YAML files defining provider components and installing them.

Additionally it encodes a set of best practices in managing providers, that helps the user in avoiding mis-configurations or in managing day 2 operations such as upgrades.

Below you can find a list of main clusterctl commands:

• clusterctl init Initialize a management cluster.
• clusterctl upgrade plan Provide a list of recommended target versions for upgrading Cluster API providers in a management cluster.
• clusterctl upgrade apply Apply new versions of Cluster API core and providers in a management cluster.
• clusterctl delete Delete one or more providers from the management cluster.
• clusterctl generate cluster Generate templates for creating workload clusters.
• clusterctl generate yaml Process yaml using clusterctl’s yaml processor.
• clusterctl get kubeconfig Gets the kubeconfig file for accessing a workload cluster.
• clusterctl move Move Cluster API objects and all their dependencies between management clusters.
• clusterctl alpha rollout Manages the rollout of Cluster API resources. For example: MachineDeployments.

For the full list of clusterctl commands please refer to commands.

Avoiding GitHub rate limiting

While using providers hosted on GitHub, clusterctl is calling GitHub API which are rate limited; for normal usage free tier is enough but when using clusterctl extensively users might hit the rate limit.

To avoid rate limiting for the public repos set the GITHUB_TOKEN environment variable. To generate a token follow this documentation. The token only needs repo scope for clusterctl.

Installing clusterctl

Instructions are available in the Quick Start.

clusterctl commands

clusterctl init

The clusterctl init command installs the Cluster API components and transforms the Kubernetes cluster into a management cluster.

This document provides more detail on how clusterctl init works and on the supported options for customizing your management cluster.

Defining the management cluster

The clusterctl init command accepts in input a list of providers to install.

Automatically installed providers

The clusterctl init command automatically adds the cluster-api core provider, the kubeadm bootstrap provider, and the kubeadm control-plane provider to the list of providers to install. This allows users to use a concise command syntax for initializing a management cluster. For example, to get a fully operational management cluster with the aws infrastructure provider, the cluster-api core provider, the kubeadm bootstrap, and the kubeadm control-plane provider, use the command:

clusterctl init --infrastructure aws

Provider version

The clusterctl init command by default installs the latest version available for each selected provider.

Target namespace

The clusterctl init command by default installs each provider in the default target namespace defined by each provider, e.g. capi-system for the Cluster API core provider.

See the provider documentation for more details.

Provider repositories

To access provider specific information, such as the components YAML to be used for installing a provider, clusterctl init accesses the provider repositories, that are well-known places where the release assets for a provider are published.

See clusterctl configuration for more info about provider repository configurations.

Variable substitution

Providers can use variables in the components YAML published in the provider’s repository.

During clusterctl init, those variables are replaced with environment variables or with variables read from the clusterctl configuration.

Additional information

When installing a provider, the clusterctl init command executes a set of steps to simplify the lifecycle management of the provider’s components.

• All the provider’s components are labeled, so they can be easily identified in subsequent moments of the provider’s lifecycle, e.g. upgrades.

labels:
- clusterctl.cluster.x-k8s.io: ""
- cluster.x-k8s.io/provider: "<provider-name>"

• An additional Provider object is created in the target namespace where the provider is installed. This object keeps track of the provider version, and other useful information for the inventory of the providers currently installed in the management cluster.

Cert-manager

Cluster API providers require a cert-manager version supporting the cert-manager.io/v1 API to be installed in the cluster.

While doing init, clusterctl checks if there is a version of cert-manager already installed. If not, clusterctl will install a default version (currently cert-manager v1.11.0). See clusterctl configuration for available options to customize this operation.

Avoiding GitHub rate limiting

Follow this

clusterctl generate cluster

The clusterctl generate cluster command returns a YAML template for creating a workload cluster.

For example

clusterctl generate cluster my-cluster --kubernetes-version v1.16.3 --control-plane-machine-count=3 --worker-machine-count=3 > my-cluster.yaml

Generates a YAML file named my-cluster.yaml with a predefined list of Cluster API objects; Cluster, Machines, Machine Deployments, etc. to be deployed in the current namespace (in case, use the --target-namespace flag to specify a different target namespace).

Then, the file can be modified using your editor of choice; when ready, run the following command to apply the cluster manifest.

kubectl apply -f my-cluster.yaml

Selecting the infrastructure provider to use

The clusterctl generate cluster command uses smart defaults in order to simplify the user experience; in the example above, it detects that there is only an aws infrastructure provider in the current management cluster and so it automatically selects a cluster template from the aws provider’s repository.

In case there is more than one infrastructure provider, the following syntax can be used to select which infrastructure provider to use for the workload cluster:

clusterctl generate cluster my-cluster --kubernetes-version v1.16.3 \
    --infrastructure aws > my-cluster.yaml

or

clusterctl generate cluster my-cluster --kubernetes-version v1.16.3 \
    --infrastructure aws:v0.4.1 > my-cluster.yaml

Flavors

The infrastructure provider authors can provide different types of cluster templates, or flavors; use the --flavor flag to specify which flavor to use; e.g.

clusterctl generate cluster my-cluster --kubernetes-version v1.16.3 \
    --flavor high-availability > my-cluster.yaml

Please refer to the providers documentation for more info about available flavors.

Alternative source for cluster templates

clusterctl uses the provider’s repository as a primary source for cluster templates; the following alternative sources for cluster templates can be used as well:

ConfigMaps

Use the --from-config-map flag to read cluster templates stored in a Kubernetes ConfigMap; e.g.

clusterctl generate cluster my-cluster --kubernetes-version v1.16.3 \
    --from-config-map my-templates > my-cluster.yaml

Also following flags are available --from-config-map-namespace (defaults to current namespace) and --from-config-map-key (defaults to template).

GitHub or local file system folder

Use the --from flag to read cluster templates stored in a GitHub repository or in a local file system folder; e.g.

clusterctl generate cluster my-cluster --kubernetes-version v1.16.3 \
   --from https://github.com/my-org/my-repository/blob/main/my-template.yaml > my-cluster.yaml

or

clusterctl generate cluster my-cluster --kubernetes-version v1.16.3 \
   --from ~/my-template.yaml > my-cluster.yaml

Variables

If the selected cluster template expects some environment variables, the user should ensure those variables are set in advance.

E.g. if the AWS_CREDENTIALS variable is expected for a cluster template targeting the aws infrastructure, you should ensure the corresponding environment variable to be set before executing clusterctl generate cluster.

Please refer to the providers documentation for more info about the required variables or use the clusterctl generate cluster --list-variables flag to get a list of variables names required by a cluster template.

The clusterctl configuration file can be used as alternative to environment variables.

clusterctl generate provider

Generate templates for provider components.

clusterctl fetches the provider components from the provider repository and performs variable substitution.

Variable values are either sourced from the clusterctl config file or from environment variables

Usage: clusterctl generate provider [flags]

Current usage of the command is as follows:

# Generates a yaml file for creating provider with variable values using
# components defined in the provider repository.
clusterctl generate provider --infrastructure aws

# Generates a yaml file for creating provider for a specific version with variable values using
# components defined in the provider repository.
clusterctl generate provider --infrastructure aws:v0.4.1

# Displays information about a specific infrastructure provider.
# If applicable, prints out the list of required environment variables.
clusterctl generate provider --infrastructure aws --describe

# Displays information about a specific version of the infrastructure provider.
clusterctl generate provider --infrastructure aws:v0.4.1 --describe

# Generates a yaml file for creating provider for a specific version.
# No variables will be processed and substituted using this flag
clusterctl generate provider --infrastructure aws:v0.4.1 --raw

clusterctl generate yaml

The clusterctl generate yaml command processes yaml using clusterctl’s yaml processor.

The intent of this command is to allow users who may have specific templates to leverage clusterctl’s yaml processor for variable substitution. For example, this command can be leveraged in local and CI scripts or for development purposes.

clusterctl ships with a simple yaml processor that performs variable substitution that takes into account default values. Under the hood, clusterctl’s yaml processor uses drone/envsubst to replace variables and uses the defaults if necessary.

Variable values are either sourced from the clusterctl config file or from environment variables.

Current usage of the command is as follows:

# Generates a configuration file with variable values using a template from a
# specific URL.
clusterctl generate yaml --from https://github.com/foo-org/foo-repository/blob/main/cluster-template.yaml

# Generates a configuration file with variable values using
# a template stored locally.
clusterctl generate yaml  --from ~/workspace/cluster-template.yaml

# Prints list of variables used in the local template
clusterctl generate yaml --from ~/workspace/cluster-template.yaml --list-variables

# Prints list of variables from template passed in via stdin
cat ~/workspace/cluster-template.yaml | clusterctl generate yaml --from - --list-variables

# Default behavior for this sub-command is to read from stdin.
# Generate configuration from stdin
cat ~/workspace/cluster-template.yaml | clusterctl generate yaml

clusterctl get kubeconfig

This command prints the kubeconfig of an existing workload cluster into stdout. This functionality is available in clusterctl v0.3.9 or newer.

Examples

Get the kubeconfig of a workload cluster named foo.

clusterctl get kubeconfig foo

Get the kubeconfig of a workload cluster named foo in the namespace bar

clusterctl get kubeconfig foo --namespace bar

Get the kubeconfig of a workload cluster named foo using a specific context bar

clusterctl get kubeconfig foo --kubeconfig-context bar

clusterctl describe cluster

The clusterctl describe cluster command provides an “at a glance” view of a Cluster API cluster designed to help the user in quickly understanding if there are problems and where.

For example clusterctl describe cluster capi-quickstart will provide an output similar to:

The “at a glance” view is based on the idea that clusterctl should avoid overloading the user with information, but instead surface problems, if any.

In practice, if you look at the ControlPlane node, you might notice that the underlying machines are grouped together, because all of them have the same state (Ready equal to True), so it is not necessary to repeat the same information three times.

If this is not the case, and machines have different states, the visualization is going to use different lines:

You might also notice that the visualization does not represent the infrastructure machine or the bootstrap object linked to a machine, unless their state differs from the machine’s state.

Customizing the visualization

By default the visualization generated by clusterctl describe cluster hides details for the sake of simplicity and shortness. However, if required, the user can ask for showing all the detail:

By using the --disable-grouping flag, the user can force the visualization to show all the machines on separated lines, no matter if they have the same state or not:

By using the --disable-no-echo flag, the user can force the visualization to show infrastructure machines and bootstrap objects linked to machines, no matter if they have the same state or not:

It is also possible to force the visualization to show all the conditions for an object (instead of showing only the ready condition). e.g. with --show-conditions KubeadmControlPlane you get:

Please note that this option is flexible, and you can pass a comma separated list of kind or kind/name for which the command should show all the object’s conditions (use ‘all’ to show conditions for everything).

clusterctl move

The clusterctl move command allows to move the Cluster API objects defining workload clusters, like e.g. Cluster, Machines, MachineDeployments, etc. from one management cluster to another management cluster.

You can use:

clusterctl move --to-kubeconfig="path-to-target-kubeconfig.yaml"

To move the Cluster API objects existing in the current namespace of the source management cluster; in case if you want to move the Cluster API objects defined in another namespace, you can use the --namespace flag.

Pivot

Pivoting is a process for moving the provider components and declared Cluster API resources from a source management cluster to a target management cluster.

This can now be achieved with the following procedure:

1. Use clusterctl init to install the provider components into the target management cluster
2. Use clusterctl move to move the cluster-api resources from a Source Management cluster to a Target Management cluster

Bootstrap & Pivot

The pivot process can be bounded with the creation of a temporary bootstrap cluster used to provision a target Management cluster.

This can now be achieved with the following procedure:

1. Create a temporary bootstrap cluster, e.g. using Kind or Minikube
2. Use clusterctl init to install the provider components
3. Use clusterctl generate cluster ... | kubectl apply -f - to provision a target management cluster
4. Wait for the target management cluster to be up and running
5. Get the kubeconfig for the new target management cluster
6. Use clusterctl init with the new cluster’s kubeconfig to install the provider components
7. Use clusterctl move to move the Cluster API resources from the bootstrap cluster to the target management cluster
8. Delete the bootstrap cluster

Note: It’s required to have at least one worker node to schedule Cluster API workloads (i.e. controllers). A cluster with a single control plane node won’t be sufficient due to the NoSchedule taint. If a worker node isn’t available, clusterctl init will timeout.

Dry run

With --dry-run option you can dry-run the move action by only printing logs without taking any actual actions. Use log level verbosity -v to see different levels of information.

clusterctl upgrade

The clusterctl upgrade command can be used to upgrade the version of the Cluster API providers (CRDs, controllers) installed into a management cluster.

upgrade plan

The clusterctl upgrade plan command can be used to identify possible targets for upgrades.

clusterctl upgrade plan

Produces an output similar to this:

Checking cert-manager version...
Cert-Manager will be upgraded from "v1.5.0" to "v1.5.3"

Checking new release availability...

Management group: capi-system/cluster-api, latest release available for the v1beta1 API Version of Cluster API (contract):

NAME                    NAMESPACE                           TYPE                     CURRENT VERSION   NEXT VERSION
bootstrap-kubeadm       capi-kubeadm-bootstrap-system       BootstrapProvider        v0.4.0           v1.0.0
control-plane-kubeadm   capi-kubeadm-control-plane-system   ControlPlaneProvider     v0.4.0           v1.0.0
cluster-api             capi-system                         CoreProvider             v0.4.0           v1.0.0
infrastructure-docker   capd-system                         InfrastructureProvider   v0.4.0           v1.0.0

You can now apply the upgrade by executing the following command:

   clusterctl upgrade apply --contract v1beta1

The output contains the latest release available for each API Version of Cluster API (contract) available at the moment.

upgrade apply

After choosing the desired option for the upgrade, you can run the following command to upgrade all the providers in the management cluster. This upgrades all the providers to the latest stable releases.

clusterctl upgrade apply --contract v1beta1

The upgrade process is composed by three steps:

• Check the cert-manager version, and if necessary, upgrade it.
• Delete the current version of the provider components, while preserving the namespace where the provider components are hosted and the provider’s CRDs.
• Install the new version of the provider components.

Please note that clusterctl does not upgrade Cluster API objects (Clusters, MachineDeployments, Machine etc.); upgrading such objects are the responsibility of the provider’s controllers.

clusterctl delete

The clusterctl delete command deletes the provider components from the management cluster.

The operation is designed to prevent accidental deletion of user created objects. For example:

clusterctl delete --infrastructure aws

This command deletes the AWS infrastructure provider components, while preserving the namespace where the provider components are hosted and the provider’s CRDs.

If you want to delete all the providers in a single operation , you can use the --all flag.

clusterctl delete --all

clusterctl completion

The clusterctl completion command outputs shell completion code for the specified shell (bash or zsh). The shell code must be evaluated to provide interactive completion of clusterctl commands.

Bash

To install bash-completion on macOS, use Homebrew:

brew install bash-completion

Once installed, bash_completion must be evaluated. This can be done by adding the following line to the ~/.bash_profile.

[[ -r "$(brew --prefix)/etc/profile.d/bash_completion.sh" ]] && . "$(brew --prefix)/etc/profile.d/bash_completion.sh"

If bash-completion is not installed on Linux, please install the ‘bash-completion’ package via your distribution’s package manager.

You now have to ensure that the clusterctl completion script gets sourced in all your shell sessions. There are multiple ways to achieve this:

• Source the completion script in your ~/.bash_profile file:

  source <(clusterctl completion bash)
  

• Add the completion script to the /usr/local/etc/bash_completion.d directory:

  clusterctl completion bash >/usr/local/etc/bash_completion.d/clusterctl
  

Zsh

The clusterctl completion script for Zsh can be generated with the command clusterctl completion zsh.

If shell completion is not already enabled in your environment you will need to enable it. You can execute the following once:

echo "autoload -U compinit; compinit" >> ~/.zshrc

To load completions for each session, execute once:

clusterctl completion zsh > "${fpath[1]}/_clusterctl"

You will need to start a new shell for this setup to take effect.

clusterctl alpha rollout

The clusterctl alpha rollout command manages the rollout of a Cluster API resource. It consists of several sub-commands which are documented below.

Restart

Use the restart sub-command to force an immediate rollout. Note that rollout refers to the replacement of existing machines with new machines using the desired rollout strategy (default: rolling update). For example, here the MachineDeployment my-md-0 will be immediately rolled out:

clusterctl alpha rollout restart machinedeployment/my-md-0

Undo

Use the undo sub-command to rollback to an earlier revision. For example, here the MachineDeployment my-md-0 will be rolled back to revision number 3. If the --to-revision flag is omitted, the MachineDeployment will be rolled back to the revision immediately preceding the current one. If the desired revision does not exist, the undo will return an error.

clusterctl alpha rollout undo machinedeployment/my-md-0 --to-revision=3

Pause/Resume

Use the pause sub-command to pause a Cluster API resource. The command is a NOP if the resource is already paused. Note that internally, this command sets the Paused field within the resource spec (e.g. MachineDeployment.Spec.Paused) to true.

clusterctl alpha rollout pause machinedeployment/my-md-0

Use the resume sub-command to resume a currently paused Cluster API resource. The command is a NOP if the resource is currently not paused.

clusterctl alpha rollout resume machinedeployment/my-md-0

clusterctl alpha topology plan

The clusterctl alpha topology plan command can be used to get a plan of how a Cluster topology evolves given file(s) containing resources to be applied to a Cluster.

The input file(s) could contain a new/modified Cluster, a new/modified ClusterClass and/or new/modified templates, depending on the use case you are going to plan for (see more details below).

The topology plan output would provide details about objects that will be created, updated and deleted of a target cluster; If instead the command detects that the change impacts many Clusters, the users will be required to select one to focus on (see flags below).

clusterctl alpha topology plan -f input.yaml -o output/

Example use cases

Designing a new ClusterClass

When designing a new ClusterClass users might want to preview the Cluster generated using such ClusterClass. The clusterctl alpha topology plan command can be used to do so:

clusterctl alpha topology plan -f example-cluster-class.yaml -f example-cluster.yaml -o output/

example-cluster-class.yaml holds the definitions of the ClusterClass and all the associated templates.

apiVersion: cluster.x-k8s.io/v1beta1
kind: ClusterClass
metadata:
  name: example-cluster-class
  namespace: default
spec:
  controlPlane:
    ref:
      apiVersion: controlplane.cluster.x-k8s.io/v1beta1
      kind: KubeadmControlPlaneTemplate
      name: example-cluster-control-plane
      namespace: default
    machineInfrastructure:
      ref:
        kind: DockerMachineTemplate
        apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
        name: "example-cluster-control-plane"
        namespace: default
  infrastructure:
    ref:
      apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
      kind: DockerClusterTemplate
      name: example-cluster
      namespace: default
  workers:
    machineDeployments:
    - class: "default-worker"
      template:
        bootstrap:
          ref:
            apiVersion: bootstrap.cluster.x-k8s.io/v1beta1
            kind: KubeadmConfigTemplate
            name: example-docker-worker-bootstraptemplate
        infrastructure:
          ref:
            apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
            kind: DockerMachineTemplate
            name: example-docker-worker-machinetemplate
---
apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
kind: DockerClusterTemplate
metadata:
  name: example-cluster
  namespace: default
spec:
  template:
    spec: {}
---
kind: KubeadmControlPlaneTemplate
apiVersion: controlplane.cluster.x-k8s.io/v1beta1
metadata:
  name: "example-cluster-control-plane"
  namespace: default
spec:
  template:
    spec:
      machineTemplate:
        nodeDrainTimeout: 1s
      kubeadmConfigSpec:
        clusterConfiguration:
          controllerManager:
            extraArgs: { enable-hostpath-provisioner: 'true' }
          apiServer:
            certSANs: [ localhost, 127.0.0.1 ]
        initConfiguration:
          nodeRegistration:
            criSocket: unix:///var/run/containerd/containerd.sock
            kubeletExtraArgs:
              cgroup-driver: cgroupfs
              eviction-hard: 'nodefs.available<0%,nodefs.inodesFree<0%,imagefs.available<0%'
        joinConfiguration:
          nodeRegistration:
            criSocket: unix:///var/run/containerd/containerd.sock
            kubeletExtraArgs:
              cgroup-driver: cgroupfs
              eviction-hard: 'nodefs.available<0%,nodefs.inodesFree<0%,imagefs.available<0%'
---
apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
kind: DockerMachineTemplate
metadata:
  name: "example-cluster-control-plane"
  namespace: default
spec:
  template:
    spec:
      extraMounts:
      - containerPath: "/var/run/docker.sock"
        hostPath: "/var/run/docker.sock"
---
apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
kind: DockerMachineTemplate
metadata:
  name: "example-docker-worker-machinetemplate"
  namespace: default
spec:
  template:
    spec: {}
---
apiVersion: bootstrap.cluster.x-k8s.io/v1beta1
kind: KubeadmConfigTemplate
metadata:
  name: "example-docker-worker-bootstraptemplate"
  namespace: default
spec:
  template:
    spec:
      joinConfiguration:
        nodeRegistration:
          kubeletExtraArgs:
            cgroup-driver: cgroupfs
            eviction-hard: 'nodefs.available<0%,nodefs.inodesFree<0%,imagefs.available<0%'

example-cluster.yaml holds the definition of example-cluster Cluster.

apiVersion: cluster.x-k8s.io/v1beta1
kind: Cluster
metadata:
  name: "example-cluster"
  namespace: "default"
  labels:
    cni: kindnet
spec:
  clusterNetwork:
    services:
      cidrBlocks: ["10.128.0.0/12"]
    pods:
      cidrBlocks: ["192.168.0.0/16"]
    serviceDomain: "cluster.local"
  topology:
    class: example-cluster-class
    version: v1.21.2
    controlPlane:
      metadata: {}
      replicas: 1
    workers:
      machineDeployments:
      - class: "default-worker"
        name: "md-0"
        replicas: 1

Produces an output similar to this:

The following ClusterClasses will be affected by the changes:
 ＊ default/example-cluster-class

The following Clusters will be affected by the changes:
 ＊ default/example-cluster

Changes for Cluster "default/example-cluster": 

  NAMESPACE  KIND                   NAME                                  ACTION    
  default    DockerCluster          example-cluster-rnx2q                 created   
  default    DockerMachineTemplate  example-cluster-control-plane-dfnvz   created   
  default    DockerMachineTemplate  example-cluster-md-0-infra-qz9qk      created   
  default    KubeadmConfigTemplate  example-cluster-md-0-bootstrap-m29vz  created   
  default    KubeadmControlPlane    example-cluster-b2lhc                 created   
  default    MachineDeployment      example-cluster-md-0-pqscg            created   
  default    Secret                 example-cluster-shim                  created   
  default    Cluster                example-cluster                       modified  

Created objects are written to directory "output/created"
Modified objects are written to directory "output/modified"

The contents of the output directory are similar to this:

output
├── created
│   ├── DockerCluster_default_example-cluster-rnx2q.yaml
│   ├── DockerMachineTemplate_default_example-cluster-control-plane-dfnvz.yaml
│   ├── DockerMachineTemplate_default_example-cluster-md-0-infra-qz9qk.yaml
│   ├── KubeadmConfigTemplate_default_example-cluster-md-0-bootstrap-m29vz.yaml
│   ├── KubeadmControlPlane_default_example-cluster-b2lhc.yaml
│   ├── MachineDeployment_default_example-cluster-md-0-pqscg.yaml
│   └── Secret_default_example-cluster-shim.yaml
└── modified
    ├── Cluster_default_example-cluster.diff
    ├── Cluster_default_example-cluster.jsonpatch
    ├── Cluster_default_example-cluster.modified.yaml
    └── Cluster_default_example-cluster.original.yaml

Plan changes to Cluster topology

When making changes to a Cluster topology the clusterctl alpha topology plan can be used to analyse how the underlying objects will be affected.

clusterctl alpha topology plan -f modified-example-cluster.yaml -o output/

The modified-example-cluster.yaml scales up the control plane to 3 replicas and adds additional labels to the machine deployment.

apiVersion: cluster.x-k8s.io/v1beta1
kind: Cluster
metadata:
  name: "example-cluster"
  namespace: default
  labels:
    cni: kindnet
spec:
  clusterNetwork:
    services:
      cidrBlocks: ["10.128.0.0/12"]
    pods:
      cidrBlocks: ["192.168.0.0/16"]
    serviceDomain: "cluster.local"
  topology:
    class: example-cluster-class
    version: v1.21.2
    controlPlane:
      metadata: {}
      # Scale up the control plane from 1 -> 3.
      replicas: 3
    workers:
      machineDeployments:
      - class: "default-worker"
        # Apply additional labels.
        metadata: 
          labels:
            test-label: md-0-label
        name: "md-0"
        replicas: 1

Produces an output similar to this:

Detected a cluster with Cluster API installed. Will use it to fetch missing objects.
No ClusterClasses will be affected by the changes.
The following Clusters will be affected by the changes:
 ＊ default/example-cluster

Changes for Cluster "default/example-cluster": 

  NAMESPACE  KIND                 NAME                        ACTION    
  default    KubeadmControlPlane  example-cluster-l7kx8       modified  
  default    MachineDeployment    example-cluster-md-0-j58ln  modified  

Modified objects are written to directory "output/modified"

Rebase a Cluster to a different ClusterClass

The command can be used to plan if a Cluster can be successfully rebased to a different ClusterClass.

Rebasing a Cluster to a different ClusterClass:

# Rebasing from `example-cluster-class` to `another-cluster-class`.
clusterctl alpha topology plan -f rebase-example-cluster.yaml -o output/

The example-cluster Cluster is rebased from example-cluster-class to another-cluster-class. In this example another-cluster-class is assumed to be available in the management cluster.

apiVersion: cluster.x-k8s.io/v1beta1
kind: Cluster
metadata:
  name: "example-cluster"
  namespace: "default"
  labels:
    cni: kindnet
spec:
  clusterNetwork:
    services:
      cidrBlocks: ["10.128.0.0/12"]
    pods:
      cidrBlocks: ["192.168.0.0/16"]
    serviceDomain: "cluster.local"
  topology:
    # ClusterClass changed from 'example-cluster-class' -> 'another-cluster-class'.
    class: another-cluster-class
    version: v1.21.2
    controlPlane:
      metadata: {}
      replicas: 1
    workers:
      machineDeployments:
      - class: "default-worker"
        name: "md-0"
        replicas: 1

If the target ClusterClass is compatible with the original ClusterClass the output be similar to:

Detected a cluster with Cluster API installed. Will use it to fetch missing objects.
No ClusterClasses will be affected by the changes.
The following Clusters will be affected by the changes:
 ＊ default/example-cluster

Changes for Cluster "default/example-cluster": 

  NAMESPACE  KIND                   NAME                                  ACTION    
  default    DockerCluster          example-cluster-7t7pl                 modified  
  default    DockerMachineTemplate  example-cluster-control-plane-lt6kw   modified  
  default    DockerMachineTemplate  example-cluster-md-0-infra-cjxs4      modified  
  default    KubeadmConfigTemplate  example-cluster-md-0-bootstrap-m9sg8  modified  
  default    KubeadmControlPlane    example-cluster-l7kx8                 modified  

Modified objects are written to directory "output/modified"

Instead, if the command detects that the rebase operation would lead to a non-functional cluster (ClusterClasses are incompatible), the output will be similar to:

Detected a cluster with Cluster API installed. Will use it to fetch missing objects.
Error: failed defaulting and validation on input objects: failed to run defaulting and validation on Clusters: failed validation of cluster.x-k8s.io/v1beta1, Kind=Cluster default/example-cluster: Cluster.cluster.x-k8s.io "example-cluster" is invalid: spec.topology.workers.machineDeployments[0].class: Invalid value: "default-worker": MachineDeploymentClass with name "default-worker" does not exist in ClusterClass "another-cluster-class"

In this example rebasing will lead to a non-functional Cluster because the ClusterClass is missing a worker class that is used by the Cluster.

Testing the effects of changing a ClusterClass

When planning for a change on a ClusterClass you might want to understand what effects the change will have on existing clusters.

clusterctl alpha topology plan -f modified-first-cluster-class.yaml -o output/

When multiple clusters are affected, only the list of Clusters and ClusterClasses is presented.

Detected a cluster with Cluster API installed. Will use it to fetch missing objects.
The following ClusterClasses will be affected by the changes:
 ＊ default/first-cluster-class

The following Clusters will be affected by the changes:
 ＊ default/first-cluster
 ＊ default/second-cluster

No target cluster identified. Use --cluster to specify a target cluster to get detailed changes.

To get the full list of changes for the “first-cluster”:

clusterctl alpha topology plan -f modified-first-cluster-class.yaml -o output/ -c "first-cluster"

Output will be similar to the full summary output provided in other examples.

How does topology plan work?

The topology plan operation is composed of the following steps:

• Set the namespace on objects in the input with missing namespace.
• Run the Defaulting and Validation webhooks on the Cluster and ClusterClass objects in the input.
• Dry run the topology reconciler on the target cluster.
• Capture all changes observed during reconciliation.

Reference

--file, -f (REQUIRED)

The input file(s) with the target changes. Supports multiple input files.

The objects in the input should follow these rules:

• All the objects in the input should belong to the same namespace.
• Should not have multiple Clusters.
• Should not have multiple ClusterClasses.

--output-directory, -o (REQUIRED)

Information about the objects that are created and updated is written to this directory.

For objects that are modified the following files are written to disk:

• Original object
• Final object
• JSON patch between the original and the final objects
• Diff of the original and final objects

--cluster, -c (Optional)

When multiple clusters are affected by the input, --cluster can be used to specify a target cluster.

If only one cluster is affected or if a Cluster is in the input it defaults as the target cluster.

--namespace, -n (Optional)

Namespace used for objects with missing namespaces in the input.

If not provided, the namespace defined in kubeconfig is used. If a kubeconfig is not available the value default is used.

clusterctl backup

Backup Cluster API objects and all dependencies from a management cluster.

clusterctl config repositories

Display the list of providers and their repository configurations.

clusterctl ships with a list of known providers; if necessary, edit $HOME/.cluster-api/clusterctl.yaml file to add a new provider or to customize existing ones.

clusterctl help

Help provides help for any command in the application. Simply type clusterctl help [command] for full details.

clusterctl restore

Restore Cluster API objects from file by glob. Object files are searched in the default config directory or in the provided directory.

clusterctl version

Print clusterctl version.

clusterctl Configuration File

The clusterctl config file is located at $HOME/.cluster-api/clusterctl.yaml. It can be used to:

• Customize the list of providers and provider repositories.
• Provide configuration values to be used for variable substitution when installing providers or creating clusters.
• Define image overrides for air-gapped environments.

Provider repositories

The clusterctl CLI is designed to work with providers implementing the clusterctl Provider Contract.

Each provider is expected to define a provider repository, a well-known place where release assets are published.

By default, clusterctl ships with providers sponsored by SIG Cluster Lifecycle. Use clusterctl config repositories to get a list of supported providers and their repository configuration.

Users can customize the list of available providers using the clusterctl configuration file, as shown in the following example:

providers:
  # add a custom provider
  - name: "my-infra-provider"
    url: "https://github.com/myorg/myrepo/releases/latest/infrastructure-components.yaml"
    type: "InfrastructureProvider"
  # override a pre-defined provider
  - name: "cluster-api"
    url: "https://github.com/myorg/myforkofclusterapi/releases/latest/core-components.yaml"
    type: "CoreProvider"
  # add a custom provider on a self-hosted GitLab (host should start with "gitlab.")
  - name: "my-other-infra-provider"
    url: "https://gitlab.example.com/api/v4/projects/myorg%2Fmyrepo/packages/generic/myrepo/v1.2.3/infrastructure-components.yaml"
    type: "InfrastructureProvider"
  # override a pre-defined provider on a self-hosted GitLab (host should start with "gitlab.")
  - name: "kubeadm"
    url: "https://gitlab.example.com/api/v4/projects/external-packages%2Fcluster-api/packages/generic/cluster-api/v1.1.3/bootstrap-components.yaml"
    type: "BootstrapProvider"

See provider contract for instructions about how to set up a provider repository.

Note: It is possible to use the ${HOME} and ${CLUSTERCTL_REPOSITORY_PATH} environment variables in url.

Variables

When installing a provider clusterctl reads a YAML file that is published in the provider repository. While executing this operation, clusterctl can substitute certain variables with the ones provided by the user.

The same mechanism also applies when clusterctl reads the cluster templates YAML published in the repository, e.g. when injecting the Kubernetes version to use, or the number of worker machines to create.

The user can provide values using OS environment variables, but it is also possible to add variables in the clusterctl config file:

# Values for environment variable substitution
AWS_B64ENCODED_CREDENTIALS: XXXXXXXX

In case a variable is defined both in the config file and as an OS environment variable, the environment variable takes precedence.

Cert-Manager configuration

While doing init, clusterctl checks if there is a version of cert-manager already installed. If not, clusterctl will install a default version.

By default, cert-manager will be fetched from https://github.com/cert-manager/cert-manager/releases; however, if the user wants to use a different repository, it is possible to use the following configuration:

cert-manager:
  url: "/Users/foo/.cluster-api/dev-repository/cert-manager/latest/cert-manager.yaml"

Note: It is possible to use the ${HOME} and ${CLUSTERCTL_REPOSITORY_PATH} environment variables in url.

Similarly, it is possible to override the default version installed by clusterctl by configuring:

cert-manager:
  ...
  version: "v1.1.1"

For situations when resources are limited or the network is slow, the cert-manager wait time to be running can be customized by adding a field to the clusterctl config file, for example:

cert-manager:
  ...
  timeout: 15m

The value string is a possibly signed sequence of decimal numbers, each with optional fraction and a unit suffix, such as “300ms”, “-1.5h” or “2h45m”. Valid time units are “ns”, “us” (or “µs”), “ms”, “s”, “m”, “h”.

If no value is specified, or the format is invalid, the default value of 10 minutes will be used.

Please note that the configuration above will be considered also when doing clusterctl upgrade plan or clusterctl upgrade plan.

Avoiding GitHub rate limiting

Follow this

Overrides Layer

clusterctl uses an overrides layer to read in injected provider components, cluster templates and metadata. By default, it reads the files from $HOME/.cluster-api/overrides.

The directory structure under the overrides directory should follow the template:

<providerType-providerName>/<version>/<fileName>

For example,

├── bootstrap-kubeadm
│   └── v0.3.0
│       └── bootstrap-components.yaml
├── cluster-api
│   └── v0.3.0
│       └── core-components.yaml
├── control-plane-kubeadm
│   └── v0.3.0
│       └── control-plane-components.yaml
└── infrastructure-aws
    └── v0.5.0
            ├── cluster-template-dev.yaml
            └── infrastructure-components.yaml

For developers who want to generate the overrides layer, see Build artifacts locally.

Once these overrides are specified, clusterctl will use them instead of getting the values from the default or specified providers.

One example usage of the overrides layer is that it allows you to deploy clusters with custom templates that may not be available from the official provider repositories. For example, you can now do:

clusterctl generate cluster mycluster --flavor dev --infrastructure aws:v0.5.0 -v5

The -v5 provides verbose logging which will confirm the usage of the override file.

Using Override="cluster-template-dev.yaml" Provider="infrastructure-aws" Version="v0.5.0"

Another example, if you would like to deploy a custom version of CAPA, you can make changes to infrastructure-components.yaml in the overrides folder and run,

clusterctl init --infrastructure aws:v0.5.0 -v5

...
Using Override="infrastructure-components.yaml" Provider="infrastructure-aws" Version="v0.5.0"
...

If you prefer to have the overrides directory at a different location (e.g. /Users/foobar/workspace/dev-releases) you can specify the overrides directory in the clusterctl config file as

overridesFolder: /Users/foobar/workspace/dev-releases

Note: It is possible to use the ${HOME} and ${CLUSTERCTL_REPOSITORY_PATH} environment variables in overridesFolder.

Image overrides

When working in air-gapped environments, it’s necessary to alter the manifests to be installed in order to pull images from a local/custom image repository instead of public ones (e.g. gcr.io, or quay.io).

The clusterctl configuration file can be used to instruct clusterctl to override images automatically.

This can be achieved by adding an images configuration entry as shown in the example:

images:
  all:
    repository: myorg.io/local-repo

Please note that the image override feature allows for more fine-grained configuration, allowing to set image overrides for specific components, for example:

images:
  all:
    repository: myorg.io/local-repo
  cert-manager:
    tag: v1.5.3

In this example we are overriding the image repository for all the components and the image tag for all the images in the cert-manager component.

If required to alter only a specific image you can use:

images:
  all:
    repository: myorg.io/local-repo
  cert-manager/cert-manager-cainjector:
    tag: v1.5.3

Debugging/Logging

To have more verbose logs you can use the -v flag when running the clusterctl and set the level of the logging verbose with a positive integer number, ie. -v 3.

If you do not want to use the flag every time you issue a command you can set the environment variable CLUSTERCTL_LOG_LEVEL or set the variable in the clusterctl config file located by default at $HOME/.cluster-api/clusterctl.yaml.

Skip checking for updates

clusterctl automatically checks for new versions every time it is used. If you do not want clusterctl to check for new updates you can set the environment variable CLUSTERCTL_DISABLE_VERSIONCHECK to "true" or set the variable in the clusterctl config file located by default at $HOME/.cluster-api/clusterctl.yaml.

clusterctl Provider Contract

The clusterctl command is designed to work with all the providers compliant with the following rules.

Provider Repositories

Each provider MUST define a provider repository, that is a well-known place where the release assets for a provider are published.

The provider repository MUST contain the following files:

• The metadata YAML
• The components YAML

Additionally, the provider repository SHOULD contain the following files:

• Workload cluster templates

Optionally, the provider repository can include the following files:

• ClusterClass definitions

Creating a provider repository on GitHub

You can use a GitHub release to package your provider artifacts for other people to use.

A GitHub release can be used as a provider repository if:

• The release tag is a valid semantic version number
• The components YAML, the metadata YAML and eventually the workload cluster templates are included into the release assets.

See the GitHub docs for more information about how to create a release.

Creating a provider repository on GitLab

You can use a GitLab generic packages for provider artifacts.

A provider url should be in the form https://{host}/api/v4/projects/{projectSlug}/packages/generic/{packageName}/{defaultVersion}/{componentsPath}, where:

• {host} should start with gitlab. (gitlab.com, gitlab.example.org, ...)
• {projectSlug} is either a project id (42) or escaped full path (myorg%2Fmyrepo)
• {defaultVersion} is a valid semantic version number
• The components YAML, the metadata YAML and eventually the workload cluster templates are included into the same package version

See the GitLab docs for more information about how to create a generic package.

This can be used in conjunction with GitLabracadabra to avoid direct internet access from clusterctl, and use GitLab as artifacts repository. For example, for the core provider:

• Use the following action file:

  external-packages/cluster-api:
    packages_enabled: true
    package_mirrors:
    - github:
        full_name: kubernetes-sigs/cluster-api
        tags:
        - v1.2.3
        assets:
        - clusterctl-linux-amd64
        - core-components.yaml
        - bootstrap-components.yaml
        - control-plane-components.yaml
        - metadata.yaml
  

• Use the following clusterctl configuration:

  providers:
    # override a pre-defined provider on a self-host GitLab
    - name: "cluster-api"
      url: "https://gitlab.example.com/api/v4/projects/external-packages%2Fcluster-api/packages/generic/cluster-api/v1.2.3/core-components.yaml"
      type: "CoreProvider"
  

Limitation: Provider artifacts hosted on GitLab don’t support getting all versions. As a consequence, you need to set version explicitly for upgrades.

Creating a local provider repository

clusterctl supports reading from a repository defined on the local file system.

A local repository can be defined by creating a <provider-label> folder with a <version> sub-folder for each hosted release; the sub-folder name MUST be a valid semantic version number. e.g.

~/local-repository/infrastructure-aws/v0.5.2

Each version sub-folder MUST contain the corresponding components YAML, the metadata YAML and eventually the workload cluster templates.

Metadata YAML

The provider is required to generate a metadata YAML file and publish it to the provider’s repository.

The metadata YAML file documents the release series of each provider and maps each release series to an API Version of Cluster API (contract).

For example, for Cluster API:

apiVersion: clusterctl.cluster.x-k8s.io/v1alpha3
kind: Metadata
releaseSeries:
- major: 0
  minor: 3
  contract: v1alpha3
- major: 0
  minor: 2
  contract: v1alpha2

Components YAML

The provider is required to generate a components YAML file and publish it to the provider’s repository. This file is a single YAML with all the components required for installing the provider itself (CRDs, Controller, RBAC etc.).

The following rules apply:

Naming conventions

It is strongly recommended that:

• Core providers release a file called core-components.yaml
• Infrastructure providers release a file called infrastructure-components.yaml
• Bootstrap providers release a file called bootstrap-components.yaml
• Control plane providers release a file called control-plane-components.yaml

Target namespace

The instance components should contain one Namespace object, which will be used as the default target namespace when creating the provider components.

All the objects in the components YAML MUST belong to the target namespace, with the exception of objects that are not namespaced, like ClusterRoles/ClusterRoleBinding and CRD objects.

Controllers & Watching namespace

Each provider is expected to deploy controllers using a Deployment.

While defining the Deployment Spec, the container that executes the controller binary MUST be called manager.

The manager MUST support a --namespace flag for specifying the namespace where the controller will look for objects to reconcile; however, clusterctl will always install providers watching for all namespaces (--namespace=""); for more details see support for multiple instances for more context.

Variables

The components YAML can contain environment variables matching the format ${VAR}; it is highly recommended to prefix the variable name with the provider name e.g. ${AWS_CREDENTIALS}

clusterctl uses the library drone/envsubst to perform variable substitution.

# If `VAR` is not set or empty, the default value is used. This is true for
# all the following formats.
${VAR:=default}
${VAR=default}
${VAR:-default}

Other functions such as substring replacement are also supported by the library. See drone/envsubst for more information.

Additionally, each provider should create user facing documentation with the list of required variables and with all the additional notes that are required to assist the user in defining the value for each variable.

Labels

The components YAML components should be labeled with cluster.x-k8s.io/provider and the name of the provider. This will enable an easier transition from kubectl apply to clusterctl.

As a reference you can consider the labels applied to the following providers.

Workload cluster templates

An infrastructure provider could publish a cluster templates file to be used by clusterctl generate cluster. This is single YAML with all the objects required to create a new workload cluster.

With ClusterClass enabled it is possible to have cluster templates with managed topologies. Cluster templates with managed topologies require only the cluster object in the template and a corresponding ClusterClass definition.

The following rules apply:

Naming conventions

Cluster templates MUST be stored in the same location as the component YAML and follow this naming convention:

1. The default cluster template should be named cluster-template.yaml.
2. Additional cluster template should be named cluster-template-{flavor}.yaml. e.g cluster-template-prod.yaml

{flavor} is the name the user can pass to the clusterctl generate cluster --flavor flag to identify the specific template to use.

Each provider SHOULD create user facing documentation with the list of available cluster templates.

Target namespace

The cluster template YAML MUST assume the target namespace already exists.

All the objects in the cluster template YAML MUST be deployed in the same namespace.

Variables

The cluster templates YAML can also contain environment variables (as can the components YAML).

Additionally, each provider should create user facing documentation with the list of required variables and with all the additional notes that are required to assist the user in defining the value for each variable.

Common variables

The clusterctl generate cluster command allows user to set a small set of common variables via CLI flags or command arguments.

Templates writers should use the common variables to ensure consistency across providers and a simpler user experience (if compared to the usage of OS environment variables or the clusterctl config file).

Additionally, the value of the command argument to clusterctl generate cluster <cluster-name> (<cluster-name> in this case), will be applied to every occurrence of the ${ CLUSTER_NAME } variable.

ClusterClass definitions

An infrastructure provider could publish a ClusterClass definition file to be used by clusterctl generate cluster that will be used along with the workload cluster templates. This is a single YAML with all the objects required that make up the ClusterClass.

The following rules apply:

Naming conventions

ClusterClass definitions MUST be stored in the same location as the component YAML and follow this naming convention:

1. The ClusterClass definition should be named clusterclass-{ClusterClass-name}.yaml, e.g clusterclass-prod.yaml.

{ClusterClass-name} is the name of the ClusterClass that is referenced from the Cluster.spec.topology.class field in the Cluster template; Cluster template files using a ClusterClass are usually simpler because they are no longer required to have all the templates.

Each provider should create user facing documentation with the list of available ClusterClass definitions.

Target namespace

The ClusterClass definition YAML MUST assume the target namespace already exists.

The references in the ClusterClass definition should NOT specify a namespace.

It is recommended that none of the objects in the ClusterClass YAML should specify a namespace.

Even if technically possible, it is strongly recommended that none of the objects in the ClusterClass definitions are shared across multiple definitions; this helps in preventing changing an object inadvertently impacting many ClusterClasses, and consequently, all the Clusters using those ClusterClasses.

Variables

Currently the ClusterClass definitions SHOULD NOT have any environment variables in them.

ClusterClass definitions files should not use variable substitution, given that ClusterClass and managed topologies provide an alternative model for variable definition.

Note

A ClusterClass definition is automatically included in the output of clusterctl generate cluster if the cluster template uses a managed topology and a ClusterClass with the same name does not already exists in the Cluster.

OwnerReferences chain

Each provider is responsible to ensure that all the providers resources (like e.g. VSphereCluster, VSphereMachine, VSphereVM etc. for the vsphere provider) MUST have a Metadata.OwnerReferences entry that links directly or indirectly to a Cluster object.

Please note that all the provider specific resources that are referenced by the Cluster API core objects will get the OwnerReference set by the Cluster API core controllers, e.g.:

• The Cluster controller ensures that all the objects referenced in Cluster.Spec.InfrastructureRef get an OwnerReference that links directly to the corresponding Cluster.
• The Machine controller ensures that all the objects referenced in Machine.Spec.InfrastructureRef get an OwnerReference that links to the corresponding Machine, and the Machine is linked to the Cluster through its own OwnerReference chain.

That means that, practically speaking, provider implementers are responsible for ensuring that the OwnerReferences are set only for objects that are not directly referenced by Cluster API core objects, e.g.:

• All the VSphereVM instances should get an OwnerReference that links to the corresponding VSphereMachine, and the VSphereMachine is linked to the Cluster through its own OwnerReference chain.

Additional notes

Components YAML transformations

Provider authors should be aware of the following transformations that clusterctl applies during component installation:

• Variable substitution;
• Enforcement of target namespace:
  • The name of the namespace object is set;
  • The namespace field of all the objects is set (with exception of cluster wide objects like e.g. ClusterRoles);
• All components are labeled;

Cluster template transformations

Provider authors should be aware of the following transformations that clusterctl applies during components installation:

• Variable substitution;
• Enforcement of target namespace:
  • The namespace field of all the objects are set;

Links to external objects

The clusterctl command requires that both the components YAML and the cluster templates contain all the required objects.

If, for any reason, the provider authors/YAML designers decide not to comply with this recommendation and e.g. to

• implement links to external objects from a component YAML (e.g. secrets, aggregated ClusterRoles NOT included in the component YAML)
• implement link to external objects from a cluster template (e.g. secrets, configMaps NOT included in the cluster template)

The provider authors/YAML designers should be aware that it is their responsibility to ensure the proper functioning of clusterctl when using non-compliant component YAML or cluster templates.

Move

Provider authors should be aware that clusterctl move command implements a discovery mechanism that considers:

• All the Kind defined in one of the CRDs installed by clusterctl using clusterctl init (identified via the clusterctl.cluster.x-k8s.io label); For each CRD, discovery collects:
  • All the objects from the namespace being moved only if the CRD scope is Namespaced.
  • All the objects if the CRD scope is Cluster.
• All the ConfigMap objects from the namespace being moved.
• All the Secret objects from the namespace being moved and from the namespaces where infrastructure providers are installed.

After completing discovery, clusterctl move moves to the target cluster only the objects discovered in the previous phase that are compliant with one of the following rules:

• The object is directly or indirectly linked to a Cluster object (linked through the OwnerReference chain).
• The object is a secret containing a user provided certificate (linked to a Cluster object via a naming convention).
• The object is directly or indirectly linked to a ClusterResourceSet object (through the OwnerReference chain).
• The object is directly or indirectly linked to another object with the clusterctl.cluster.x-k8s.io/move-hierarchy label, e.g. the infrastructure Provider ClusterIdentity objects (linked through the OwnerReference chain).
• The object hase the clusterctl.cluster.x-k8s.io/move label or the clusterctl.cluster.x-k8s.io/move-hierarchy label, e.g. the CPI config secret.

Note. clusterctl.cluster.x-k8s.io/move and clusterctl.cluster.x-k8s.io/move-hierarchy labels could be applied to single objects or at the CRD level (the label applies to all the objects).

Please note that during move:

• Namespaced objects, if not existing in the target cluster, are created.
• Namespaced objects, if already existing in the target cluster, are updated.
• Namespaced objects are removed from the source cluster.
• Global objects, if not existing in the target cluster, are created.
• Global objects, if already existing in the target cluster, are not updated.
• Global objects are not removed from the source cluster.
• Namespaced objects which are part of an owner chain that starts with a global object (e.g. a secret containing credentials for an infrastructure Provider ClusterIdentity) are treated as Global objects.

If moving some of excluded object is required, the provider authors should create documentation describing the exact move sequence to be executed by the user.

Additionally, provider authors should be aware that clusterctl move assumes all the provider’s Controllers respect the Cluster.Spec.Paused field introduced in the v1alpha3 Cluster API specification.

clusterctl for Developers

This document describes how to use clusterctl during the development workflow.

Prerequisites

• A Cluster API development setup (go, git, kind v0.9 or newer, Docker v19.03 or newer etc.)
• A local clone of the Cluster API GitHub repository
• A local clone of the GitHub repositories for the providers you want to install

Build clusterctl

From the root of the local copy of Cluster API, you can build the clusterctl binary by running:

make clusterctl

The output of the build is saved in the bin/ folder; In order to use it you have to specify the full path, create an alias or copy it into a folder under your $PATH.

Use local artifacts

Clusterctl by default uses artifacts published in the providers repositories; during the development workflow you may want to use artifacts from your local workstation.

There are two options to do so:

• Use the overrides layer, when you want to override a single published artifact with a local one.
• Create a local repository, when you want to avoid using published artifacts and use the local ones instead.

If you want to create a local artifact, follow these instructions:

Build artifacts locally

In order to build artifacts for the CAPI core provider, the kubeadm bootstrap provider and the kubeadm control plane provider:

make docker-build REGISTRY=gcr.io/k8s-staging-cluster-api PULL_POLICY=IfNotPresent

In order to build docker provider artifacts

make docker-capd-build REGISTRY=gcr.io/k8s-staging-cluster-api PULL_POLICY=IfNotPresent

Create a clusterctl-settings.json file

Next, create a clusterctl-settings.json file and place it in your local copy of Cluster API. This file will be used by create-local-repository.py. Here is an example:

{
  "providers": ["cluster-api","bootstrap-kubeadm","control-plane-kubeadm", "infrastructure-aws", "infrastructure-docker"],
  "provider_repos": ["../cluster-api-provider-aws"]
}

providers (Array[]String, default=[]): A list of the providers to enable. See available providers for more details.

provider_repos (Array[]String, default=[]): A list of paths to all the providers you want to use. Each provider must have a clusterctl-settings.json file describing how to build the provider assets.

Create the local repository

Run the create-local-repository hack from the root of the local copy of Cluster API:

cmd/clusterctl/hack/create-local-repository.py

The script reads from the source folders for the providers you want to install, builds the providers’ assets, and places them in a local repository folder located under $HOME/.cluster-api/dev-repository/. Additionally, the command output provides you the clusterctl init command with all the necessary flags. The output should be similar to:

clusterctl local overrides generated from local repositories for the cluster-api, bootstrap-kubeadm, control-plane-kubeadm, infrastructure-docker, infrastructure-aws providers.
in order to use them, please run:

clusterctl init \
   --core cluster-api:v0.3.8 \
   --bootstrap kubeadm:v0.3.8 \
   --control-plane kubeadm:v0.3.8 \
   --infrastructure aws:v0.5.0 \
   --infrastructure docker:v0.3.8 \
   --config ~/.cluster-api/dev-repository/config.yaml

As you might notice, the command is using the $HOME/.cluster-api/dev-repository/config.yaml config file, containing all the required setting to make clusterctl use the local repository.

Available providers

The following providers are currently defined in the script:

• cluster-api
• bootstrap-kubeadm
• control-plane-kubeadm
• infrastructure-docker

More providers can be added by editing the clusterctl-settings.json in your local copy of Cluster API; please note that each provider_repo should have its own clusterctl-settings.json describing how to build the provider assets, e.g.

{
  "name": "infrastructure-aws",
  "config": {
    "componentsFile": "infrastructure-components.yaml",
    "nextVersion": "v0.5.0"
  }
}

Create a kind management cluster

kind can provide a Kubernetes cluster to be used as a management cluster. See Install and/or configure a kubernetes cluster for more information.

Before running clusterctl init, you must ensure all the required images are available in the kind cluster.

This is always the case for images published in some image repository like docker hub or gcr.io, but it can’t be the case for images built locally; in this case, you can use kind load to move the images built locally. e.g.

kind load docker-image gcr.io/k8s-staging-cluster-api/cluster-api-controller-amd64:dev
kind load docker-image gcr.io/k8s-staging-cluster-api/kubeadm-bootstrap-controller-amd64:dev
kind load docker-image gcr.io/k8s-staging-cluster-api/kubeadm-control-plane-controller-amd64:dev
kind load docker-image gcr.io/k8s-staging-cluster-api/capd-manager-amd64:dev

to make the controller images available for the kubelet in the management cluster.

When the kind cluster is ready and all the required images are in place, run the clusterctl init command generated by the create-local-repository.py script.

Optionally, you may want to check if the components are running properly. The exact components are dependent on which providers you have initialized. Below is an example output with the docker provider being installed.

kubectl get deploy -A | grep  "cap\|cert"
capd-system

capd-controller-manager                         1/1     1            1           25m
capi-kubeadm-bootstrap-system       capi-kubeadm-bootstrap-controller-manager       1/1     1            1           25m
capi-kubeadm-control-plane-system   capi-kubeadm-control-plane-controller-manager   1/1     1            1           25m
capi-system                         capi-controller-manager                         1/1     1            1           25m
cert-manager                        cert-manager                                    1/1     1            1           27m
cert-manager                        cert-manager-cainjector                         1/1     1            1           27m
cert-manager                        cert-manager-webhook                            1/1     1            1           27m

Additional Notes for the Docker Provider

Select the appropriate kubernetes version

When selecting the --kubernetes-version, ensure that the kindest/node image is available.

For example, assuming that on docker hub there is no image for version vX.Y.Z, therefore creating a CAPD workload cluster with --kubernetes-version=vX.Y.Z will fail. See issue 3795 for more details.

Get the kubeconfig for the workload cluster

The command for getting the kubeconfig file for connecting to a workload cluster is the following:

clusterctl get kubeconfig capi-quickstart > capi-quickstart.kubeconfig

Fix kubeconfig when using Docker Desktop

When using using Docker Desktop on macOS or Docker Desktop (Docker Engine works fine) on Linux, you’ll need to take a few extra steps to get the kubeconfig for a workload cluster created with the Docker provider.

# Point the kubeconfig to the exposed port of the load balancer, rather than the inaccessible container IP.
sed -i -e "s/server:.*/server: https:\/\/$(docker port capi-quickstart-lb 6443/tcp | sed "s/0.0.0.0/127.0.0.1/")/g" ./capi-quickstart.kubeconfig

Developer Guide

Pieces of Cluster API

Cluster API is made up of many components, all of which need to be running for correct operation. For example, if you wanted to use Cluster API with AWS, you’d need to install both the cluster-api manager and the aws manager.

Cluster API includes a built-in provisioner, Docker, that’s suitable for using for testing and development. This guide will walk you through getting that daemon, known as CAPD, up and running.

Other providers may have additional steps you need to follow to get up and running.

Prerequisites

Docker

Iterating on the cluster API involves repeatedly building Docker containers. You’ll need the docker daemon v19.03 or newer available.

A Cluster

You’ll likely want an existing cluster as your management cluster. The easiest way to do this is with kind v0.9 or newer, as explained in the quick start.

Make sure your cluster is set as the default for kubectl. If it’s not, you will need to modify subsequent kubectl commands below.

A container registry

If you’re using kind, you’ll need a way to push your images to a registry so they can be pulled. You can instead side-load all images, but the registry workflow is lower-friction.

Most users test with GCR, but you could also use something like Docker Hub. If you choose not to use GCR, you’ll need to set the REGISTRY environment variable.

Kustomize

You’ll need to install kustomize. There is a version of kustomize built into kubectl, but it does not have all the features of kustomize v3 and will not work.

Kubebuilder

You’ll need to install kubebuilder.

Envsubst

You’ll need envsubst or similar to handle clusterctl var replacement. Note: drone/envsubst releases v1.0.2 and earlier do not have the binary packaged under cmd/envsubst. It is available in Go pseudo-version v1.0.3-0.20200709231038-aa43e1c1a629

We provide a make target to generate the envsubst binary if desired. See the provider contract for more details about how clusterctl uses variables.

make envsubst

The generated binary can be found at ./hack/tools/bin/envsubst

Cert-Manager

You’ll need to deploy cert-manager components on your management cluster, using kubectl

kubectl apply -f https://github.com/cert-manager/cert-manager/releases/download/v1.11.0/cert-manager.yaml

Ensure the cert-manager webhook service is ready before creating the Cluster API components.

This can be done by running:

kubectl wait --for=condition=Available --timeout=300s apiservice v1beta1.webhook.cert-manager.io

Development

Option 1: Tilt

Tilt is a tool for quickly building, pushing, and reloading Docker containers as part of a Kubernetes deployment. Many of the Cluster API engineers use it for quick iteration. Please see our Tilt instructions to get started.

Option 2: The Old-fashioned way

Building everything

You’ll need to build two docker images, one for Cluster API itself and one for the Docker provider (CAPD).

make docker-build
make docker-capd-build

Push both images

make docker-push

docker push gcr.io/cluster-api-242700/cluster-api-controller-amd64:dev
The push refers to repository [gcr.io/cluster-api-242700/cluster-api-controller-amd64]
90a39583ad5f: Layer already exists
932da5156413: Layer already exists
dev: digest: sha256:263262cfbabd3d1add68172a5a1d141f6481a2bc443672ce80778dc122ee6234 size: 739

$ make docker-capd-push

docker push gcr.io/cluster-api-242700/capd-manager-amd64:dev
The push refers to repository [gcr.io/cluster-api-242700/capd-manager-amd64]

Make a note of the URLs and the digests. You’ll need them for the next step. In this case, they’re...

gcr.io/cluster-api-242700/capd-manager-amd64@sha256:35670a049372ae063dad910c267a4450758a139c4deb248c04c3198865589ab2

and

gcr.io/cluster-api-242700/cluster-api-controller-amd64@sha256:263262cfbabd3d1add68172a5a1d141f6481a2bc443672ce80778dc122ee6234

Edit the manifests

$EDITOR config/default/manager_image_patch.yaml
$EDITOR test/infrastructure/docker/config/default/manager_image_patch.yaml

In both cases, change the - image: url to the digest URL mentioned above:

apiVersion: apps/v1
kind: Deployment
metadata:
  name: controller-manager
  namespace: system
spec:
  template:
    spec:
      containers:
      - image: gcr.io/cluster-api-242700/capd-manager-amd64@sha256:35670a049372ae063dad910c267a4450758a139c4deb248c04c3198865589ab2`
        name: manager

Apply the manifests

kustomize build config/default | ./hack/tools/bin/envsubst | kubectl apply -f -

namespace/capi-system configured
customresourcedefinition.apiextensions.k8s.io/clusters.cluster.x-k8s.io configured
customresourcedefinition.apiextensions.k8s.io/kubeadmconfigs.bootstrap.cluster.x-k8s.io configured
customresourcedefinition.apiextensions.k8s.io/kubeadmconfigtemplates.bootstrap.cluster.x-k8s.io configured
customresourcedefinition.apiextensions.k8s.io/machinedeployments.cluster.x-k8s.io configured
customresourcedefinition.apiextensions.k8s.io/machines.cluster.x-k8s.io configured
customresourcedefinition.apiextensions.k8s.io/machinesets.cluster.x-k8s.io configured
role.rbac.authorization.k8s.io/capi-leader-election-role configured
clusterrole.rbac.authorization.k8s.io/capi-manager-role configured
rolebinding.rbac.authorization.k8s.io/capi-leader-election-rolebinding configured
clusterrolebinding.rbac.authorization.k8s.io/capi-manager-rolebinding configured
deployment.apps/capi-controller-manager created

kustomize build test/infrastructure/docker/config/default | ./hack/tools/bin/envsubst | kubectl apply -f -

namespace/capd-system configured
customresourcedefinition.apiextensions.k8s.io/dockerclusters.infrastructure.cluster.x-k8s.io configured
customresourcedefinition.apiextensions.k8s.io/dockermachines.infrastructure.cluster.x-k8s.io configured
customresourcedefinition.apiextensions.k8s.io/dockermachinetemplates.infrastructure.cluster.x-k8s.io configured
role.rbac.authorization.k8s.io/capd-leader-election-role configured
clusterrole.rbac.authorization.k8s.io/capd-manager-role configured
clusterrole.rbac.authorization.k8s.io/capd-proxy-role configured
rolebinding.rbac.authorization.k8s.io/capd-leader-election-rolebinding configured
clusterrolebinding.rbac.authorization.k8s.io/capd-manager-rolebinding configured
clusterrolebinding.rbac.authorization.k8s.io/capd-proxy-rolebinding configured
service/capd-controller-manager-metrics-service created
deployment.apps/capd-controller-manager created

Check the status of the clusters

kubectl get po -n capd-system

NAME                                       READY   STATUS    RESTARTS   AGE
capd-controller-manager-7568c55d65-ndpts   2/2     Running   0          71s
kubectl get po -n capi-system
NAME                                      READY   STATUS    RESTARTS   AGE
capi-controller-manager-bf9c6468c-d6msj   1/1     Running   0          2m9s

Testing

Cluster API has a number of test suites available for you to run. Please visit the testing page for more information on each suite.

That’s it!

Now you can create CAPI objects! To test another iteration, you’ll need to follow the steps to build, push, update the manifests, and apply.

Videos explaining CAPI architecture and code walkthroughs

CAPI components and architecture

• Cluster API Intro and Deep Dive - May 2022 v1beta1
• Cluster API Deep Dive - Dec 2020 v1alpha3
• Cluster API Deep Dive - Sept 2020 v1alpha3
• Declarative Kubernetes Clusters with Cluster API - Oct 2020 v1alpha3
• TGI Kubernetes 178: ClusterAPI - ClusterClass & Managed Topologies - Dec 2020 v1beta1

Additional ClusterAPI KubeCon talks

• How to Migrate 700 Kubernetes Clusters to Cluster API with Zero Downtime - May 2022
• Build Your Own Cluster API Provider the Easy Way - May 2022

Code walkthroughs

• CAPD Deep Dive - March 2021 v1alpha4
• API conversion code walkthrough - January 2022

Let’s chat about ...

We are currently hosting “Let’s chat about ...” sessions where we are talking about topics relevant to contributors and users of the Cluster API project. For more details and an up-to-date list of recordings of past sessions please see Let’s chat about ....

• Local CAPI development and debugging with Tilt (EMEA/Americas) - February 2022
• Local CAPI development and debugging with Tilt (APAC/EMEA) - February 2022
• Code structure & Makefile targets (EMEA/Americas) - February 2022
• Code structure & Makefile targets (APAC/EMEA) - February 2022

Repository Layout

This page covers the repository structure and details about the directories in Cluster API.

cluster-api
└───.github
└───api
└───bootstrap
└───cmd
│   │   clusterctl
└───config
└───controllers
└───controlplane
└───docs
└───errors
└───exp
└───feature
└───hack
└───internal
└───logos
└───scripts
└───test
└───third_party
└───util
└───version
└───webhooks
└───main.go
└───Makefile

Github

~/.github

Contains GitHub workflow configuration and templates for Pull requests, bug reports etc.

API

~/api

This folder is used to store types and their related resources present in CAPI core. It includes things like API types, spec/status definitions, condition types, simple webhook implementation, autogenerated, deepcopy and conversion files. Some examples of Cluster API types defined in this package include Cluster, ClusterClass, Machine, MachineSet, MachineDeployment and MachineHealthCheck.

API folder has subfolders for each supported API version.

Bootstrap

~/bootstrap

This folder contains Cluster API bootstrap provider Kubeadm (CABPK) which is a reference implementation of a Cluster API bootstrap provider. This folder contains the types and controllers responsible for generating a cloud-init or ignition configuration to turn a Machine into a Kubernetes Node. It is built and deployed as an independent provider alongside the Cluster API controller manager.

ControlPlane

~/controlplane

This folder contains a reference implementation of a Cluster API Control Plane provider - KubeadmControlPlane. This package contains the API types and controllers required to instantiate and manage a Kubernetes control plane. It is built and deployed as an independent provider alongside the Cluster API controller manager.

Cluster API Provider Docker

~/test/insfrastructure/docker

This folder contains a reference implementation of an infrastructure provider for the Cluster API project using Docker. This provider is intended for development purposes only.

Clusterctl CLI

~/cmd/clusterctl

This folder contains Clusterctl, a CLI that can be used to deploy Cluster API and providers, generate cluster manifests, read the status of a cluster, and much more.

Manifest Generation

~/config

This is a Kubernetes manifest folder containing application resource configuration as kustomize YAML definitions. These are generated from other folders in the repo using make generate-manifests

Some of the subfolders are:

• ~/config/certmanager - It contains manifests like self-signed issuer CR and certificate CR useful for cert manager.

• ~/config/crd - It contains CRDs generated from types defined in api folder

• ~/config/manager - It contains manifest for the deployment of core Cluster API manager.

• ~/config/rbac - Manifests for RBAC resources generated from kubebuilder markers defined in controllers.

• ~/config/webhook - Manifest for webhooks generated from the markers defined in the web hook implementations present in api folder.

Note: Additional config containing manifests can be found in the packages for KubeadmControlPlane, KubeadmBoostrap and Cluster API Provider Docker.

Controllers

~/internal

This folder contains resources which are not meant to be used directly by users of Cluster API e.g. the implementation of controllers is present in ~/internal/controllers directory so that we can make changes in controller implementation without breaking users. This allows us to keep our api surface smaller and move faster.

~/controllers

This folder contains reconciler types which provide access to CAPI controllers present in ~/internal/controllers directory to our users. These types can be used users by users to run any of the Cluster API controllers in an external program.

Documentation

~/docs

This folder is a place for proposals, developer release guidelines and the Cluster API book.

~/logos

Cluster API related logos and artwork

Tools

~/hack

This folder has scripts used for building, testing and developer workflow.

~/scripts

This folder consists of CI scripts related to setup, build and e2e tests. These are mostly called by CI jobs.

~/third_party

This folder is used to copy code from other projects in-tree.

Util, Feature and Errors

~/util

This folder contains utilities which are used across multiple CAPI package. These utils are also widely imported in provider implementations and by other users of CAPI.

~/feature

This package provides feature gate management used in Cluster API as well as providers. This implementation of feature gates is shared across all providers.

~/errors

This is a place for defining errors returned by CAPI. Error types defined here can be used by users of CAPI and the providers.

Experimental features

~/exp

This folder contains experimental features of CAPI. Experimental features are unreliable until they are promoted to the main repository. Each experimental feature is supposed to be present in a subfolder of ~/exp folder e.g. ClusterResourceSet is present inside ~/exp/addons folder. Historically, machine pool resources are not present in a sub-directory. Migrating them to a subfolder like ~/exp/machinepools is still pending as it can potentially break existing users who are relying on existing folder structure.

CRDs for experimental features are present outside ~/exp directory in ~/config folder. Also, these CRDs are deployed in the cluster irrespective of the feature gate value. These features can be enabled and disabled using feature gates supplied to the core Cluster API controller.

Webhooks

The api folder contains webhooks consisting of validators and defaults for many of the types in Cluster API.

~/internal/webhooks

This directory contains the implementation of some of the Cluster API webhooks. The internal implementation means that the methods supplied by this package can not be imported by external code bases.

~/webhooks

This folder exposes the custom webhooks present in ~internal/webhooks to the users of CAPI.

Note: Additional webhook implementations can be found in the API packages for KubeadmControlPlane, KubeadmBoostrap and Cluster API Provider Docker.

Developing Cluster API with Tilt

Overview

This document describes how to use kind and Tilt for a simplified workflow that offers easy deployments and rapid iterative builds.

Prerequisites

1. Docker: v19.03 or newer
2. kind: v0.9 or newer
3. Tilt: v0.22.2 or newer
4. kustomize: provided via make kustomize
5. envsubst: provided via make envsubst
6. helm: v3.7.1 or newer
7. Clone the Cluster API repository locally
8. Clone the provider(s) you want to deploy locally as well

Getting started

Create a kind cluster

A script to create a KIND cluster along with a local docker registry and the correct mounts to run CAPD is included in the hack/ folder.

To create a pre-configured cluster run:

./hack/kind-install-for-capd.sh

You can see the status of the cluster with:

kubectl cluster-info --context kind-capi-test

Create a tilt-settings file

Next, create a tilt-settings.yaml file and place it in your local copy of cluster-api. Here is an example:

default_registry: gcr.io/your-project-name-here
provider_repos:
- ../cluster-api-provider-aws
enable_providers:
- aws
- docker
- kubeadm-bootstrap
- kubeadm-control-plane

tilt-settings fields

allowed_contexts (Array, default=[]): A list of kubeconfig contexts Tilt is allowed to use. See the Tilt documentation on allow_k8s_contexts for more details.

default_registry (String, default=””): The image registry to use if you need to push images. See the Tilt documentation for more details.

kind_cluster_name (String, default=”capi-test”): The name of the kind cluster to use when preloading images.

provider_repos (Array[]String, default=[]): A list of paths to all the providers you want to use. Each provider must have a tilt-provider.yaml or tilt-provider.json file describing how to build the provider.

enable_providers (Array[]String, default=[‘docker’]): A list of the providers to enable. See available providers for more details.

kustomize_substitutions (Map{String: String}, default={}): An optional map of substitutions for ${}-style placeholders in the provider’s yaml. Note: When running E2E tests locally using an existing cluster managed by Tilt, the following substitutions are required for successful tests:

kustomize_substitutions:
  CLUSTER_TOPOLOGY: "true"
  EXP_MACHINE_POOL: "true"
  EXP_CLUSTER_RESOURCE_SET: "true"
  EXP_KUBEADM_BOOTSTRAP_FORMAT_IGNITION: "true"
  EXP_RUNTIME_SDK: "true"

kustomize_substitutions:
  AWS_B64ENCODED_CREDENTIALS: "your credentials here"

AZURE_SUBSCRIPTION_ID=$(az account show --query id --output tsv)
az account set --subscription $AZURE_SUBSCRIPTION_ID

AZURE_SERVICE_PRINCIPAL_NAME=ServicePrincipalName

AZURE_TENANT_ID=$(az account show --query tenantId --output tsv)
AZURE_CLIENT_SECRET=$(az ad sp create-for-rbac --name http://$AZURE_SERVICE_PRINCIPAL_NAME --query password --output tsv)
AZURE_CLIENT_ID=$(az ad sp show --id http://$AZURE_SERVICE_PRINCIPAL_NAME --query appId --output tsv)

  cat <<EOF
  kustomize_substitutions:
     AZURE_SUBSCRIPTION_ID_B64: "$(echo "${AZURE_SUBSCRIPTION_ID}" | tr -d '\n' | base64 | tr -d '\n')"
     AZURE_TENANT_ID_B64: "$(echo "${AZURE_TENANT_ID}" | tr -d '\n' | base64 | tr -d '\n')"
     AZURE_CLIENT_SECRET_B64: "$(echo "${AZURE_CLIENT_SECRET}" | tr -d '\n' | base64 | tr -d '\n')"
     AZURE_CLIENT_ID_B64: "$(echo "${AZURE_CLIENT_ID}" | tr -d '\n' | base64 | tr -d '\n')"
  EOF

kustomize_substitutions:
  DO_B64ENCODED_CREDENTIALS: "your credentials here"

base64 -i ~/path/to/gcp/credentials.json

kustomize_substitutions:
  GCP_B64ENCODED_CREDENTIALS: "your credentials here"

deploy_observability ([string], default=[]): If set, installs on the dev cluster one of more observability tools. Supported values are grafana, loki, promtail and/or prometheus (Note: the UI for grafana and prometheus will be accessible via a link in the tilt console). Important! This feature requires the helm command to be available in the user’s path.

debug (Map{string: Map} default{}): A map of named configurations for the provider. The key is the name of the provider.

Supported settings:

• port (int, default=0 (disabled)): If set to anything other than 0, then Tilt will run the provider with delve and port forward the delve server to localhost on the specified debug port. This can then be used with IDEs such as Visual Studio Code, Goland and IntelliJ.

• continue (bool, default=true): By default, Tilt will run delve with --continue, such that any provider with debugging turned on will run normally unless specifically having a breakpoint entered. Change to false if you do not want the controller to start at all by default.

• profiler_port (int, default=0 (disabled)): If set to anything other than 0, then Tilt will enable the profiler with --profiler-address and set up a port forward. A “profiler” link will be visible in the Tilt Web UI for the controller.

• metrics_port (int, default=0 (disabled)): If set to anything other than 0, then Tilt will port forward to the default metrics port. A “metrics” link will be visible in the Tilt Web UI for the controller.

• race_detector (bool, default=false) (Linux amd64 only): If enabled, Tilt will compile the specified controller with cgo and statically compile in the system glibc and enable the race detector. Currently, this is only supported when building on Linux amd64 systems. You must install glibc-static or have libc.a available for this to work.

  Example: Using the configuration below:

    debug:
      core:
        continue: false
        port: 30000
        profiler_port: 40000
        metrics_port: 40001
  

  Wiring up debuggers

  Visual Studio

  When using the example above, the core CAPI controller can be debugged in Visual Studio Code using the following launch configuration:

  {
    "version": "0.2.0",
    "configurations": [
      {
        "name": "Core CAPI Controller",
        "type": "go",
        "request": "attach",
        "mode": "remote",
        "remotePath": "",
        "port": 30000,
        "host": "127.0.0.1",
        "showLog": true,
        "trace": "log",
        "logOutput": "rpc"
      }
    ]
  }
  

  Goland / Intellij

  With the above example, you can configure a Go Remote run/debug configuration pointing at port 30000.

deploy_cert_manager (Boolean, default=true): Deploys cert-manager into the cluster for use for webhook registration.

trigger_mode (String, default=auto): Optional setting to configure if tilt should automatically rebuild on changes. Set to manual to disable auto-rebuilding and require users to trigger rebuilds of individual changed components through the UI.

extra_args (Object, default={}): A mapping of provider to additional arguments to pass to the main binary configured for this provider. Each item in the array will be passed in to the manager for the given provider.

Example:

extra_args:
  kubeadm-bootstrap:
  - --logging-format=json

With this config, the respective managers will be invoked with:

manager --logging-format=json

Run Tilt!

To launch your development environment, run

tilt up

This will open the command-line HUD as well as a web browser interface. You can monitor Tilt’s status in either location. After a brief amount of time, you should have a running development environment, and you should now be able to create a cluster. There are example worker cluster configs available. These can be customized for your specific needs.

Available providers

The following providers are currently defined in the Tiltfile:

• core: cluster-api itself (Cluster/Machine/MachineDeployment/MachineSet/KubeadmConfig/KubeadmControlPlane)
• docker: Docker provider (DockerCluster/DockerMachine)

tilt-provider configuration

A provider must supply a tilt-provider.yaml file describing how to build it. Here is an example:

name: aws
config:
  image: "gcr.io/k8s-staging-cluster-api-aws/cluster-api-aws-controller",
  live_reload_deps: ["main.go", "go.mod", "go.sum", "api", "cmd", "controllers", "pkg"]

config fields

image: the image for this provider, as referenced in the kustomize files. This must match; otherwise, Tilt won’t build it.

live_reload_deps: a list of files/directories to watch. If any of them changes, Tilt rebuilds the manager binary for the provider and performs a live update of the running container.

additional_docker_helper_commands (String, default=””): Additional commands to be run in the helper image docker build. e.g.

RUN wget -qO- https://dl.k8s.io/v1.21.2/kubernetes-client-linux-amd64.tar.gz | tar xvz
RUN wget -qO- https://get.docker.com | sh

additional_docker_build_commands (String, default=””): Additional commands to be appended to the dockerfile. The manager image will use docker-slim, so to download files, use additional_helper_image_commands. e.g.

COPY --from=tilt-helper /usr/bin/docker /usr/bin/docker
COPY --from=tilt-helper /go/kubernetes/client/bin/kubectl /usr/bin/kubectl

kustomize_config (Bool, default=true): Whether or not running kustomize on the ./config folder of the provider. Set to false if your provider does not have a ./config folder or you do not want it to be applied in the cluster.

go_main (String, default=”main.go”): The go main file if not located at the root of the folder

label (String, default=provider name): The label to be used to group provider components in the tilt UI in tilt version >= v0.22.2 (see https://blog.tilt.dev/2021/08/09/resource-grouping.html); as a convention, provider abbreviation should be used (CAPD, KCP etc.).

Customizing Tilt

If you need to customize Tilt’s behavior, you can create files in cluster-api’s tilt.d directory. This file is ignored by git so you can be assured that any files you place here will never be checked in to source control.

These files are included after the providers map has been defined and after all the helper function definitions. This is immediately before the “real work” happens.

Under the covers, a.k.a “the real work”

At a high level, the Tiltfile performs the following actions:

1. Read tilt-settings.yaml
2. Configure the allowed Kubernetes contexts
3. Set the default registry
4. Define the providers map
5. Include user-defined Tilt files
6. Deploy cert-manager
7. Enable providers (core + what is listed in tilt-settings.yaml)
   1. Build the manager binary locally as a local_resource
   2. Invoke docker_build for the provider
   3. Invoke kustomize for the provider’s config/ directory

Live updates

Each provider in the providers map has a live_reload_deps list. This defines the files and/or directories that Tilt should monitor for changes. When a dependency is modified, Tilt rebuilds the provider’s manager binary on your local machine, copies the binary to the running container, and executes a restart script. This is significantly faster than rebuilding the container image for each change. It also helps keep the size of each development image as small as possible (the container images do not need the entire go toolchain, source code, module dependencies, etc.).

IDE support for Tiltfile

For Intellij, Syntax highlighting for the Tiltfile can be configured with a TextMate Bundle. For instructions, please see: Tiltfile TextMate Bundle.

For VSCode the Bazel plugin can be used, it provides syntax highlighting and auto-formatting. To enable it for Tiltfile a file association has to be configured via user settings:

"files.associations": {
  "Tiltfile": "starlark",
},

Logging

The Cluster API project is committed to improving the SRE/developer experience when troubleshooting issues, and logging plays an important part in this goal.

In Cluster API we strive to follow three principles while implementing logging:

• Logs are for SRE & developers, not for end users! Whenever an end user is required to read logs to understand what is happening in the system, most probably there is an opportunity for improvement of other observability in our API, like e.g. conditions and events.
• Navigating logs should be easy: We should make sure that SREs/Developers can easily drill down logs while investigating issues, e.g. by allowing to search all the log entries for a specific Machine object, eventually across different controllers/reconciler logs.
• Cluster API developers MUST use logs! As Cluster API contributors you are not only the ones that implement logs, but also the first users of them. Use it! Provide feedback!

Upstream Alignment

Kubernetes defines a set of logging conventions, as well as tools and libraries for logging.

Continuous improvement

The foundational items of Cluster API logging are:

• Support for structured logging in all the Cluster API controllers (see log format).
• Using contextual logging (see contextual logging).
• Adding a minimal set of key/value pairs in the logger at the beginning of each reconcile loop, so all the subsequent log entries will inherit them (see key value pairs).

Starting from the above foundations, then the long tail of small improvements will consist of following activities:

• Improve consistency of additional key/value pairs added by single log entries (see key value pairs).
• Improve log messages (see log messages).
• Improve consistency of log levels (see log levels).

Log Format

Controllers MUST provide support for structured logging and for the JSON output format; quoting the Kubernetes documentation, these are the key elements of this approach:

• Separate a log message from its arguments.
• Treat log arguments as key-value pairs.
• Be easily parsable and queryable.

Cluster API uses all the tooling provided by the Kubernetes community to implement structured logging: Klog, a logr wrapper that works with controller runtime, and other utils for exposing flags in the controller’s main.go.

Ideally, in a future release of Cluster API we will make JSON output format the default format for all the Cluster API controllers (currently the default is still text format).

Contextual logging

Contextual logging is the practice of using a log stored in the context across the entire chain of calls of a reconcile action. One of the main advantages of this approach is that key value pairs which are added to the logger at the beginning of the chain are then inherited by all the subsequent log entries created down the chain.

Contextual logging is also embedded in controller runtime; In Cluster API we use contextual logging via controller runtime’s LoggerFrom(ctx) and LoggerInto(ctx, log) primitives and this ensures that:

• The logger passed to each reconcile call has a unique reconcileID, so all the logs being written during a single reconcile call can be easily identified (note: controller runtime also adds other useful key value pairs by default).
• The logger has a key value pair identifying the objects being reconciled,e.g. a Machine Deployment, so all the logs impacting this object can be easily identified.

Cluster API developer MUST ensure that:

• The logger has a set of key value pairs identifying the hierarchy of objects the object being reconciled belongs to, e.g. the Cluster a Machine Deployment belongs to, so it will be possible to drill down logs for related Cluster API objects while investigating issues.

Key/Value Pairs

One of the key elements of structured logging is key-value pairs.

Having consistent key value pairs is a requirement for ensuring readability and for providing support for searching and correlating lines across logs.

A set of good practices for defining key value pairs is defined in the Kubernetes Guidelines, and one of the above practices is really important for Cluster API developers

• Developers MUST use klog.KObj or klog.KRef functions when logging key value pairs for Kubernetes objects, thus ensuring a key value pair representing a Kubernetes object is formatted consistently in all the logs.

Please note that, in order to ensure logs can be easily searched it is important to ensure consistency for the following key value pairs (in order of importance):

• Key value pairs identifying the object being reconciled, e.g. a Machine Deployment.
• Key value pairs identifying the hierarchy of objects being reconciled, e.g. the Cluster a Machine Deployment belongs to.
• Key value pairs identifying side effects on other objects, e.g. while reconciling a MachineDeployment, the controller creates a MachinesSet.
• Other Key value pairs.

Log Messages

• A Message MUST always start with a capital letter.
• Period at the end of a message MUST be omitted.
• Always prefer logging before the action, so in case of errors there will be an immediate, visual correlation between the action log and the corresponding error log; While logging before the action, log verbs should use the -ing form.
• Ideally log messages should surface a different level of detail according to the target log level (see log levels for more details).

Log Levels

Kubernetes provides a set of recommendations for log levels; as a small integration on the above guidelines we would like to add:

• Logs at the lower levels of verbosity (<=3) are meant to document “what happened” by describing how an object status is being changed by controller/reconcilers across subsequent reconciliations; as a rule of thumb, it is reasonable to assume that a person reading those logs has a deep knowledge of how the system works, but it should not be required for those persons to have knowledge of the codebase.
• Logs at higher levels of verbosity (>=4) are meant to document “how it happened”, providing insight on thorny parts of the code; a person reading those logs usually has deep knowledge of the codebase.
• Don’t use verbosity higher than 5.

Ideally, in a future release of Cluster API we will switch to use 2 as a default verbosity (currently it is 0) for all the Cluster API controllers as recommended by the Kubernetes guidelines.

Trade-offs

When developing logs there are operational trade-offs to take into account, e.g. verbosity vs space allocation, user readability vs machine readability, maintainability of the logs across the code base.

A reasonable approach for logging is to keep things simple and implement more log verbosity selectively and only on thorny parts of code. Over time, based on feedback from SRE/developers, more logs can be added to shed light where necessary.

Developing and testing logs

Our Tilt setup offers a batteries-included log suite based on Promtail, Loki and Grafana.

We are working to continuously improving this experience, allowing Cluster API developers to use logs and improve them as part of their development process.

For the best experience exploring the logs using Tilt:

1. Set --logging-format=json.
2. Set a high log verbosity, e.g. v=5.
3. Enable promtail, loki, and grafana under deploy_observability.

A minimal example of a tilt-settings.yaml file that deploys a ready-to-use logging suite looks like:

deploy_observability:
  - promtail
  - loki
  - grafana
enable_providers:
  - docker
  - kubeadm-bootstrap
  - kubeadm-control-plane
extra_args:
  core:
    - "--logging-format=json"
    - "--v=5"
  docker:
    - "--v=5"
    - "--logging-format=json"
  kubeadm-bootstrap:
    - "--v=5"
    - "--logging-format=json"
  kubeadm-control-plane:
    - "--v=5"
    - "--logging-format=json"

The above options can be combined with other settings from our Tilt setup. Once Tilt is up and running with these settings users will be able to browse logs using the Grafana Explore UI.

This will normally be available on localhost:3001. To explore logs from Loki, open the Explore interface for the DataSource ‘Loki’. This link should work as a shortcut with the default Tilt settings.

Example queries

In the Log browser the following queries can be used to browse logs by controller, and by specific Cluster API objects. For example:

{app="capi-controller-manager"} | json 

Will return logs from the capi-controller-manager which are parsed in json. Passing the query through the json parser allows filtering by key-value pairs that are part of nested json objects. For example .cluster.name becomes cluster_name.

{app="capi-controller-manager"} | json | cluster_name="my-cluster"

Will return logs from the capi-controller-manager that are associated with the Cluster my-cluster.

{app="capi-controller-manager"} | json | cluster_name="my-cluster" reconcileID="6f6ad971-bdb6-4fa3-b803-xxxxxxxxxxxx"

Will return logs from the capi-controller-manager, associated with the Cluster my-cluster and the Reconcile ID 6f6ad971-bdb6-4fa3-b803-xxxxxxxxxxxx. Each reconcile loop will have a unique Reconcile ID.

{app="capi-controller-manager"} | json | cluster_name="my-cluster" reconcileID="6f6ad971-bdb6-4fa3-b803-ef81c5c8f9d0" controller="cluster" | line_format "{{ .msg }}"

Will return logs from the capi-controller-manager, associated with the Cluster my-cluster and the Reconcile ID 6f6ad971-bdb6-4fa3-b803-xxxxxxxxxxxx it further selects only those logs which come from the Cluster controller. It will then format the logs so only the message is displayed.

{app=~"capd-controller-manager|capi-kubeadm-bootstrap-controller-manager|capi-kubeadm-control-plane-controller-manager"} | json | cluster_name="my-cluster" machine_name="my-cluster-linux-worker-1" | line_format "{{.controller}} {{.msg}}"

Will return the logs from four CAPI providers - the Core provider, Kubeadm Control Plane provider, Kubeadm Bootstrap provider and the Docker infrastructure provider. It filters by the cluster name and the machine name and then formats the log lines to show just the source controller and the message. This allows us to correlate logs and see actions taken by each of these four providers related to the machine my-cluster-linux-worker-1.

For more information on formatting and filtering logs using Grafana and Loki see:

• json parsing
• log queries

What about providers

Cluster API providers are developed by independent teams, and each team is free to define their own processes and conventions.

However, given that SRE/developers looking at logs are often required to look both at logs from core CAPI and providers, we encourage providers to adopt and contribute to the guidelines defined in this document.

It is also worth noting that the foundational elements of the approach described in this document are easy to achieve by leveraging default Kubernetes tooling for logging.

Testing Cluster API

This document presents testing guidelines and conventions for Cluster API.

IMPORTANT: improving and maintaining this document is a collaborative effort, so we are encouraging constructive feedback and suggestions.

Unit tests

Unit tests focus on individual pieces of logic - a single func - and don’t require any additional services to execute. They should be fast and great for getting the first signal on the current implementation, but unit tests have the risk of allowing integration bugs to slip through.

In Cluster API most of the unit tests are developed using go test, gomega and the fakeclient; however using fakeclient is not suitable for all the use cases due to some limitations in how it is implemented. In some cases contributors will be required to use envtest. See the quick reference below for more details.

Mocking external APIs

In some cases when writing tests it is required to mock external API, e.g. etcd client API or the AWS SDK API.

This problem is usually well scoped in core Cluster API, and in most cases it is already solved by using fake implementations of the target API to be injected during tests.

Instead, mocking is much more relevant for infrastructure providers; in order to address the issue some providers can use simulators reproducing the behaviour of a real infrastructure providers (e.g CAPV); if this is not possible, a viable solution is to use mocks (e.g CAPA).

Generic providers

When writing tests core Cluster API contributors should ensure that the code works with any providers, and thus it is required to not use any specific provider implementation. Instead, the so-called generic providers e.g. “GenericInfrastructureCluster” should be used because they implement the plain Cluster API contract. This prevents tests from relying on assumptions that may not hold true in all cases.

Please note that in the long term we would like to improve the implementation of generic providers, centralizing the existing set of utilities scattered across the codebase, but while details of this work will be defined do not hesitate to reach out to reviewers and maintainers for guidance.

Integration tests

Integration tests are focused on testing the behavior of an entire controller or the interactions between two or more Cluster API controllers.

In Cluster API, integration tests are based on envtest and one or more controllers configured to run against the test cluster.

With this approach it is possible to interact with Cluster API almost like in a real environment, by creating/updating Kubernetes objects and waiting for the controllers to take action. See the quick reference below for more details.

Also in case of integration tests, considerations about mocking external APIs and usage of generic providers apply.

Fuzzing tests

Fuzzing tests automatically inject randomly generated inputs, often invalid or with unexpected values, into functions to discover vulnerabilities.

Two different types of fuzzing are currently being used on the Cluster API repository:

Fuzz testing for API conversion

Cluster API uses Kubernetes’ conversion-gen to automate the generation of functions to convert our API objects between versions. These conversion functions are tested using the FuzzTestFunc util in our conversion utils package. For more information about these conversions see the API conversion code walkthrough in our video walkthrough series.

OSS-Fuzz continuous fuzzing

Parts of the CAPI code base are continuously fuzzed through the OSS-Fuzz project. Issues found in these fuzzing tests are reported to Cluster API maintainers and surfaced in issues on the repo for resolution. To read more about the integration of Cluster API with OSS Fuzz see the 2022 Cluster API Fuzzing Report.

Test maintainability

Tests are an integral part of the project codebase.

Cluster API maintainers and all the contributors should be committed to help in ensuring that tests are easily maintainable, easily readable, well documented and consistent across the code base.

In light of continuing improving our practice around this ambitious goal, we are starting to introduce a shared set of:

• Builders (sigs.k8s.io/cluster-api/internal/test/builder), allowing to create test objects in a simple and consistent way.
• Matchers (sigs.k8s.io/cluster-api/internal/test/matchers), improving how we write test assertions.

Each contribution in growing this set of utilities or their adoption across the codebase is more than welcome!

Another consideration that can help in improving test maintainability is the idea of testing “by layers”; this idea could apply whenever we are testing “higher-level” functions that internally uses one or more “lower-level” functions; in order to avoid writing/maintaining redundant tests, whenever possible contributors should take care of testing only the logic that is implemented in the “higher-level” function, delegating the test function called internally to a “lower-level” set of unit tests.

A similar concern could be raised also in the case whenever there is overlap between unit tests and integration tests, but in this case the distinctive value of the two layers of testing is determined by how test are designed:

• unit test are focused on code structure: func(input) = output, including edge case values, asserting error conditions etc.
• integration test are user story driven: as a user, I want express some desired state using API objects, wait for the reconcilers to take action, check the new system state.

Running unit and integration tests

Run make test to execute all unit and integration tests.

End-to-end tests

The end-to-end tests are meant to verify the proper functioning of a Cluster API management cluster in an environment that resemble a real production environment.

The following guidelines should be followed when developing E2E tests:

• Use the Cluster API test framework.
• Define test spec reflecting real user workflow, e.g. Cluster API quick start.
• Unless you are testing provider specific features, ensure your test can run with different infrastructure providers (see Writing Portable Tests).

See e2e development for more information on developing e2e tests for CAPI and external providers.

Running the end-to-end tests locally

Usually the e2e tests are executed by Prow, either pre-submit (on PRs) or periodically on certain branches (e.g. the default branch). Those jobs are defined in the kubernetes/test-infra repository in config/jobs/kubernetes-sigs/cluster-api. For development and debugging those tests can also be executed locally.

Prerequisites

make docker-build-e2e will build the images for all providers that will be needed for the e2e tests.

Test execution via ci-e2e.sh

To run a test locally via the command line, you should look at the Prow Job configuration for the test you want to run and then execute the same commands locally. For example to run pull-cluster-api-e2e-main just execute:

GINKGO_FOCUS="\[PR-Blocking\]" ./scripts/ci-e2e.sh

Test execution via make test-e2e

make test-e2e will run e2e tests by using whatever provider images already exist on disk. After running make docker-build-e2e at least once, make test-e2e can be used for a faster test run, if there are no provider code changes. If the provider code is changed, run make docker-build-e2e to update the images.

Test execution via IDE

It’s also possible to run the tests via an IDE which makes it easier to debug the test code by stepping through the code.

First, we have to make sure all prerequisites are fulfilled, i.e. all required images have been built (this also includes kind images). This can be done by executing the ./scripts/ci-e2e.sh script.

# Notes:
# * You can cancel the script as soon as it starts the actual test execution via `make -C test/e2e/ run`.
# * If you want to run other tests (e.g. upgrade tests), make sure all required env variables are set (see the Prow Job config).
GINKGO_FOCUS="\[PR-Blocking\]" ./scripts/ci-e2e.sh

# Make sure the cluster-templates have been generated.
make -C test/e2e cluster-templates

Now, the tests can be run in an IDE. The following describes how this can be done in Intellij IDEA and VS Code. It should work roughly the same way in all other IDEs. We assume the cluster-api repository has been checked out into /home/user/code/src/sigs.k8s.io/cluster-api.

Intellij

Create a new run configuration and fill in:

• Test framework: gotest
• Test kind: Package
• Package path: sigs.k8s.io/cluster-api/test/e2e
• Pattern: ^\QTestE2E\E$
• Working directory: /home/user/code/src/sigs.k8s.io/cluster-api/test/e2e
• Environment: ARTIFACTS=/home/user/code/src/sigs.k8s.io/cluster-api/_artifacts
• Program arguments: -e2e.config=/home/user/code/src/sigs.k8s.io/cluster-api/test/e2e/config/docker.yaml -ginkgo.focus="\[PR-Blocking\]"

VS Code

Add the launch.json file in the .vscode folder in your repo:

{
    "version": "0.2.0",
    "configurations": [
        {
            "name": "Run e2e test",
            "type": "go",
            "request": "launch",
            "mode": "test",
            "program": "${workspaceRoot}/test/e2e/e2e_suite_test.go",
            "env": {
                "ARTIFACTS":"${workspaceRoot}/_artifacts"
            },
            "args": [
                "-e2e.config=${workspaceRoot}/test/e2e/config/docker.yaml",
                "-ginkgo.focus=\\[PR-Blocking\\]",
                "-ginkgo.v=true"
            ],
            "trace": "verbose",
            "buildFlags": "-tags 'e2e'",
            "showGlobalVariables": true
        }
    ]
}

Execute the run configuration with Debug.

Running specific tests

To run a subset of tests, a combination of either one or both of GINKGO_FOCUS and GINKGO_SKIP env variables can be set. Each of these can be used to match tests, for example:

• [PR-Blocking] => Sanity tests run before each PR merge
• [K8s-Upgrade] => Tests which verify k8s component version upgrades on workload clusters
• [Conformance] => Tests which run the k8s conformance suite on workload clusters
• [ClusterClass] => Tests which use a ClusterClass to create a workload cluster
• When testing KCP.* => Tests which start with When testing KCP

For example: GINKGO_FOCUS="\\[PR-Blocking\\]" make test-e2e can be used to run the sanity E2E tests GINKGO_SKIP="\\[K8s-Upgrade\\]" make test-e2e can be used to skip the upgrade E2E tests

Further customization

The following env variables can be set to customize the test execution:

• GINKGO_FOCUS to set ginkgo focus (default empty - all tests)
• GINKGO_SKIP to set ginkgo skip (default empty - to allow running all tests)
• GINKGO_NODES to set the number of ginkgo parallel nodes (default to 1)
• E2E_CONF_FILE to set the e2e test config file (default to ${REPO_ROOT}/test/e2e/config/docker.yaml)
• ARTIFACTS to set the folder where test artifact will be stored (default to ${REPO_ROOT}/_artifacts)
• SKIP_RESOURCE_CLEANUP to skip resource cleanup at the end of the test (useful for problem investigation) (default to false)
• USE_EXISTING_CLUSTER to use an existing management cluster instead of creating a new one for each test run (default to false)
• GINKGO_NOCOLOR to turn off the ginkgo colored output (default to false)

Furthermore, it’s possible to overwrite all env variables specified in variables in test/e2e/config/docker.yaml.

Troubleshooting end-to-end tests

Analyzing logs

Logs of e2e tests can be analyzed with our development environment by pushing logs to Loki and then analyzing them via Grafana.

1. Start the development environment as described in Developing Cluster API with Tilt.
   • Make sure to deploy Loki and Grafana via deploy_observability.
   • If you only want to see imported logs, don’t deploy promtail (via deploy_observability).
   • If you want to drop all logs from Loki, just delete the Loki Pod in the observability namespace.
2. You can then import logs via the Import Logs button on the top right of the Loki resource page. Just click on the downwards arrow, enter either a ProwJob URL, a GCS path or a local folder and click on Import Logs. This will retrieve the logs and push them to Loki. Alternatively, the logs can be imported via:

   go run ./hack/tools/log-push --log-path=<log-path>
   

   Examples for log paths:
   • ProwJob URL: https://prow.k8s.io/view/gs/kubernetes-jenkins/pr-logs/pull/kubernetes-sigs_cluster-api/6189/pull-cluster-api-e2e-main/1496954690603061248
   • GCS path: gs://kubernetes-jenkins/pr-logs/pull/kubernetes-sigs_cluster-api/6189/pull-cluster-api-e2e-main/1496954690603061248
   • Local folder: ./_artifacts
3. Now the logs are available:
   • via Grafana
   • via Loki logcli

     logcli query '{app="capi-controller-manager"}' --timezone=UTC --from="2022-02-22T10:00:00Z"
     

Known Issues

Building images on SELinux

Cluster API repositories use Moby Buildkit to speed up image builds. BuildKit does not currently work on SELinux.

Use sudo setenforce 0 to make SELinux permissive when running e2e tests.

Quick reference

envtest

envtest is a testing environment that is provided by the controller-runtime project. This environment spins up a local instance of etcd and the kube-apiserver. This allows tests to be executed in an environment very similar to a real environment.

Additionally, in Cluster API there is a set of utilities under [internal/envtest] that helps developers in setting up a envtest ready for Cluster API testing, and more specifically:

• With the required CRDs already pre-configured.
• With all the Cluster API webhook pre-configured, so there are enforced guarantees about the semantic accuracy of the test objects you are going to create.

This is an example of how to create an instance of envtest that can be shared across all the tests in a package; by convention, this code should be in a file named suite_test.go:

var (
	env *envtest.Environment
	ctx = ctrl.SetupSignalHandler()
)

func TestMain(m *testing.M) {
	// Setup envtest
	...

	// Run tests
	os.Exit(envtest.Run(ctx, envtest.RunInput{
		M:        m,
		SetupEnv: func(e *envtest.Environment) { env = e },
		SetupIndexes:     setupIndexes,
		SetupReconcilers: setupReconcilers,
	}))
}

Most notably, envtest provides not only a real API server to use during testing, but it offers the opportunity to configure one or more controllers to run against the test cluster, as well as creating informers index.

func TestMain(m *testing.M) {
	// Setup envtest
	setupReconcilers := func(ctx context.Context, mgr ctrl.Manager) {
		if err := (&MyReconciler{
			Client:  mgr.GetClient(),
			Log:     log.NullLogger{},
		}).SetupWithManager(mgr, controller.Options{MaxConcurrentReconciles: 1}); err != nil {
			panic(fmt.Sprintf("Failed to start the MyReconciler: %v", err))
		}
	}

	setupIndexes := func(ctx context.Context, mgr ctrl.Manager) {
		if err := index.AddDefaultIndexes(ctx, mgr); err != nil {
		panic(fmt.Sprintf("unable to setup index: %v", err))
	}
    
    // Run tests
	...
}

By combining pre-configured validation and mutating webhooks and reconcilers/indexes it is possible to use envtest for developing Cluster API integration tests that can mimic how the system behaves in real Cluster.

Please note that, because envtest uses a real kube-apiserver that is shared across many test cases, the developer should take care in ensuring each test runs in isolation from the others, by:

• Creating objects in separated namespaces.
• Avoiding object name conflict.

Developers should also be aware of the fact that the informers cache used to access the envtest depends on actual etcd watches/API calls for updates, and thus it could happen that after creating or deleting objects the cache takes a few milliseconds to get updated. This can lead to test flakes, and thus it always recommended to use patterns like create and wait or delete and wait; Cluster API env test provides a set of utils for this scope.

However, developers should be aware that in some ways, the test control plane will behave differently from “real” clusters, and that might have an impact on how you write tests.

One common example is garbage collection; because there are no controllers monitoring built-in resources, objects do not get deleted, even if an OwnerReference is set up; as a consequence, usually test implements code for cleaning up created objects.

This is an example of a test implementing those recommendations:

func TestAFunc(t *testing.T) {
	g := NewWithT(t)
	// Generate namespace with a random name starting with ns1; such namespace
	// will host test objects in isolation from other tests.
	ns1, err := env.CreateNamespace(ctx, "ns1")
	g.Expect(err).ToNot(HaveOccurred())
	defer func() {
		// Cleanup the test namespace
		g.Expect(env.DeleteNamespace(ctx, ns1)).To(Succeed())
	}()

	obj := &clusterv1.Cluster{
		ObjectMeta: metav1.ObjectMeta{
			Name:      "test",
			Namespace: ns1.Name, // Place test objects in the test namespace
		},
	}

	// Actual test code...
}

In case of object used in many test case within the same test, it is possible to leverage on Kubernetes GenerateName; For objects that are shared across sub-tests, ensure they are scoped within the test namespace and deep copied to avoid cross-test changes that may occur to the object.

func TestAFunc(t *testing.T) {
	g := NewWithT(t)
	// Generate namespace with a random name starting with ns1; such namespace
	// will host test objects in isolation from other tests.
	ns1, err := env.CreateNamespace(ctx, "ns1")
	g.Expect(err).ToNot(HaveOccurred())
	defer func() {
		// Cleanup the test namespace
		g.Expect(env.DeleteNamespace(ctx, ns1)).To(Succeed())
	}()

	obj := &clusterv1.Cluster{
		ObjectMeta: metav1.ObjectMeta{
			GenerateName: "test-",  // Instead of assigning a name, use GenerateName
			Namespace:    ns1.Name, // Place test objects in the test namespace
		},
	}

	t.Run("test case 1", func(t *testing.T) {
		g := NewWithT(t)
		// Deep copy the object in each test case, so we prevent side effects in case the object changes.
		// Additionally, thanks to GenerateName, the objects gets a new name for each test case.
		obj := obj.DeepCopy()

	    // Actual test case code...
	}
	t.Run("test case 2", func(t *testing.T) {
		g := NewWithT(t)
		obj := obj.DeepCopy()

	    // Actual test case code...
	}
	// More test cases.
}

fakeclient

fakeclient is another utility that is provided by the controller-runtime project. While this utility is really fast and simple to use because it does not require to spin-up an instance of etcd and kube-apiserver, the fakeclient comes with a set of limitations that could hamper the validity of a test, most notably:

• it does not properly handle a set of fields which are common in the Kubernetes API objects (and Cluster API objects as well) like e.g. creationTimestamp, resourceVersion, generation, uid
• fakeclient operations do not trigger defaulting or validation webhooks, so there are no enforced guarantees about the semantic accuracy of the test objects.
• the fakeclient does not use a cache based on informers/API calls/etcd watches, so the test written in this way can’t help in surfacing race conditions related to how those components behave in real cluster.
• there is no support for cache index/operations using cache indexes.

Accordingly, using fakeclient is not suitable for all the use cases, so in some cases contributors will be required to use envtest instead. In case of doubts about which one to use when writing tests, don’t hesitate to ask for guidance from project maintainers.

ginkgo

Ginkgo is a Go testing framework built to help you efficiently write expressive and comprehensive tests using Behavior-Driven Development (“BDD”) style.

While Ginkgo is widely used in the Kubernetes ecosystem, Cluster API maintainers found the lack of integration with the most used golang IDE somehow limiting, mostly because:

• it makes interactive debugging of tests more difficult, since you can’t just run the test using the debugger directly
• it makes it more difficult to only run a subset of tests, since you can’t just run or debug individual tests using an IDE, but you now need to run the tests using make or the ginkgo command line and override the focus to select individual tests

In Cluster API you MUST use ginkgo only for E2E tests, where it is required to leverage the support for running specs in parallel; in any case, developers MUST NOT use the table driven extension DSL (DescribeTable, Entry commands) which is considered unintuitive.

gomega

Gomega is a matcher/assertion library. It is usually paired with the Ginkgo BDD test framework, but it can be used with other test frameworks too.

More specifically, in order to use Gomega with go test you should

func TestFarmHasCow(t *testing.T) {
    g := NewWithT(t)
    g.Expect(f.HasCow()).To(BeTrue(), "Farm should have cow")
}

In Cluster API all the test MUST use Gomega assertions.

go test

go test testing provides support for automated testing of Go packages.

In Cluster API Unit and integration test MUST use go test.

Developing E2E tests

E2E tests are meant to verify the proper functioning of a Cluster API management cluster in an environment that resembles a real production environment.

The following guidelines should be followed when developing E2E tests:

• Use the Cluster API test framework.
• Define test spec reflecting real user workflow, e.g. Cluster API quick start.
• Unless you are testing provider specific features, ensure your test can run with different infrastructure providers (see Writing Portable Tests).

The Cluster API test framework provides you a set of helper methods for getting your test in place quickly. The test E2E package provides examples of how this can be achieved and reusable test specs for the most common Cluster API use cases.

Prerequisites

Each E2E test requires a set of artifacts to be available:

• Binaries & docker images for Kubernetes, CNI, CRI & CSI
• Manifests & docker images for the Cluster API core components
• Manifests & docker images for the Cluster API infrastructure provider; in most cases machine images are also required (AMI, OVA etc.)
• Credentials for the target infrastructure provider
• Other support tools (e.g. kustomize, gsutil etc.)

The Cluster API test framework provides support for building and retrieving the manifest files for Cluster API core components and for the Cluster API infrastructure provider (see Setup).

For the remaining tasks you can find examples of how this can be implemented e.g. in CAPA E2E tests and CAPG E2E tests.

Setup

In order to run E2E tests it is required to create a Kubernetes cluster with a complete set of Cluster API providers installed. Setting up those elements is usually implemented in a BeforeSuite function, and it consists of two steps:

• Defining an E2E config file
• Creating the management cluster and installing providers

Defining an E2E config file

The E2E config file provides a convenient and flexible way to define common tasks for setting up a management cluster.

Using the config file it is possible to:

• Define the list of providers to be installed in the management cluster. Most notably, for each provider it is possible to define:
  • One or more versions of the providers manifest (built from the sources, or pulled from a remote location).
  • A list of additional files to be added to the provider repository, to be used e.g. to provide cluster-templates.yaml files.
• Define the list of variables to be used when doing clusterctl init or clusterctl generate cluster.
• Define a list of intervals to be used in the test specs for defining timeouts for the wait and Eventually methods.
• Define the list of images to be loaded in the management cluster (this is specific to management clusters based on kind).

An example E2E config file can be found here.

Creating the management cluster and installing providers

In order to run Cluster API E2E tests, you need a Kubernetes cluster. The NewKindClusterProvider gives you a type that can be used to create a local kind cluster and pre-load images into it. Existing clusters can be used if available.

Once you have a Kubernetes cluster, the InitManagementClusterAndWatchControllerLogs method provides a convenient way for installing providers.

This method:

• Runs clusterctl init using the above local repository.
• Waits for the providers controllers to be running.
• Creates log watchers for all the providers

Writing test specs

A typical test spec is a sequence of:

• Creating a namespace to host in isolation all the test objects.
• Creating objects in the management cluster, wait for the corresponding infrastructure to be provisioned.
• Exec operations like e.g. changing the Kubernetes version or clusterctl move, wait for the action to complete.
• Delete objects in the management cluster, wait for the corresponding infrastructure to be terminated.

Creating Namespaces

The CreateNamespaceAndWatchEvents method provides a convenient way to create a namespace and setup watches for capturing namespaces events.

Creating objects

There are two possible approaches for creating objects in the management cluster:

• Create object by object: create the Cluster object, then AwsCluster, Machines, AwsMachines etc.
• Apply a cluster-templates.yaml file thus creating all the objects this file contains.

The first approach leverages the controller-runtime Client and gives you full control, but it comes with some drawbacks as well, because this method does not directly reflect real user workflows, and most importantly, the resulting tests are not as reusable with other infrastructure providers. (See writing portable tests).

We recommend using the ClusterTemplate method and the Apply method for creating objects in the cluster. This methods mimics the recommended user workflows, and it is based on cluster-templates.yaml files that can be provided via the E2E config file, and thus easily swappable when changing the target infrastructure provider.

After creating objects in the cluster, use the existing methods in the Cluster API test framework to discover which object were created in the cluster so your code can adapt to different cluster-templates.yaml files.

Once you have object references, the framework includes methods for waiting for the corresponding infrastructure to be provisioned, e.g. WaitForClusterToProvision, WaitForKubeadmControlPlaneMachinesToExist.

Exec operations

You can use Cluster API test framework methods to modify Cluster API objects, as a last option, use the controller-runtime Client.

The Cluster API test framework also includes methods for executing clusterctl operations, like e.g. the ClusterTemplate method, the ClusterctlMove method etc.. In order to improve observability, each clusterctl operation creates a detailed log.

After using clusterctl operations, you can rely on the Get and on the Wait methods defined in the Cluster API test framework to check if the operation completed successfully.

Naming the test spec

You can categorize the test with a custom label that can be used to filter a category of E2E tests to be run. Currently, the cluster-api codebase has these labels which are used to run a focused subset of tests.

Tear down

After a test completes/fails, it is required to:

• Collect all the logs for the Cluster API controllers
• Dump all the relevant Cluster API/Kubernetes objects
• Cleanup all the infrastructure resources created during the test

Those tasks are usually implemented in the AfterSuite, and again the Cluster API test framework provides you useful methods for those tasks.

Please note that despite the fact that test specs are expected to delete objects in the management cluster and wait for the corresponding infrastructure to be terminated, it can happen that the test spec fails before starting object deletion or that objects deletion itself fails.

As a consequence, when scheduling/running a test suite, it is required to ensure all the generated resources are cleaned up. In Kubernetes, this is implemented by the boskos project.

Writing portable E2E tests

A portable E2E test is a test that can run with different infrastructure providers by simply changing the test configuration file.

The following recommendations should be followed to write portable E2E tests:

• Create different E2E config file, one for each target infrastructure provider, providing different sets of env variables and timeout intervals.
• Use the [InitManagementCluster method] for setting up the management cluster.
• Use the ClusterTemplate method and the Apply method for creating objects in the cluster using cluster-templates.yaml files instead of hard coding object creation.
• Use the Get methods defined in the Cluster API test framework to check objects being created, so your code can adapt to different cluster-templates.yaml files.
• Never hard code the infrastructure provider name in your test spec. Instead, use the InfrastructureProvider method to get access to the name of the infrastructure provider defined in the E2E config file.
• Never hard code wait intervals in your test spec. Instead use the GetIntervals method to get access to the intervals defined in the E2E config file.

Cluster API conformance tests

As of today there is no a well-defined suite of E2E tests that can be used as a baseline for Cluster API conformance.

However, creating such a suite is something that can provide a huge value for the long term success of the project.

The test E2E package provides examples of how this can be achieved by implementing a set of reusable test specs for the most common Cluster API use cases.

Controllers

Cluster API has a number of controllers, both in the core Cluster API and the reference providers, which move the state of the cluster toward some defined desired state through the process of controller reconciliation.

Documentation for the CAPI controllers can be found at:

• Bootstrap Provider
  • Bootstrap
• ControlPlane Provider
  • ControlPlane
• Core
  • Cluster
  • Machine
  • MachineSet
  • MachineDeployment
  • MachineHealthCheck
  • MachinePool
• ClusterClass
• Cluster Topology
• AddOns
  • ClusterResourceSet

Bootstrap Controller

Bootstrapping is the process in which:

1. A cluster is bootstrapped
2. A machine is bootstrapped and takes on a role within a cluster

CABPK is the reference bootstrap provider and is based on kubeadm. CABPK codifies the steps for creating a cluster in multiple configurations.

See proposal for the full details on how the bootstrap process works.

Implementations

• Kubeadm (Reference Implementation)

Cluster Controller

The Cluster controller’s main responsibilities are:

• Setting an OwnerReference on the infrastructure object referenced in Cluster.spec.infrastructureRef.
• Setting an OwnerReference on the control plane object referenced in Cluster.spec.controlPlaneRef.
• Cleanup of all owned objects so that nothing is dangling after deletion.
• Keeping the Cluster’s status in sync with the infrastructureCluster’s status.
• Creating a kubeconfig secret for workload clusters.

Contracts

Infrastructure Provider

The general expectation of an infrastructure provider is to provision the necessary infrastructure components needed to run a Kubernetes cluster. As an example, the AWS infrastructure provider, specifically the AWSCluster reconciler, will provision a VPC, some security groups, an ELB, a bastion instance and some other components all with AWS best practices baked in. Once that infrastructure is provisioned and ready to be used the AWSMachine reconciler takes over and provisions EC2 instances that will become a Kubernetes cluster through some bootstrap mechanism.

The cluster controller will set an OwnerReference on the infrastructureCluster. This controller should normally take no action during reconciliation until it sees the OwnerReference.

An infrastructureCluster controller is expected to eventually have its spec.controlPlaneEndpoint set by the user/controller.

The Cluster controller bubbles up spec.controlPlaneEndpoint and status.ready into status.infrastructureReady from the infrastructureCluster.

Required status fields

The InfrastructureCluster object must have a status object.

The spec object must have the following fields defined:

• controlPlaneEndpoint - identifies the endpoint used to connect to the target’s cluster apiserver.

The status object must have the following fields defined:

• ready - a boolean field that is true when the infrastructure is ready to be used.

Optional status fields

The status object may define several fields that do not affect functionality if missing:

• failureReason - is a string that explains why a fatal error has occurred, if possible.
• failureMessage - is a string that holds the message contained by the error.

Example:

kind: MyProviderCluster
apiVersion: infrastructure.cluster.x-k8s.io/v1alpha3
spec:
  controlPlaneEndpoint:
    host: example.com
    port: 6443
status:
    ready: true

Secrets

If you are using the kubeadm bootstrap provider you do not have to provide any Cluster API secrets. It will generate all necessary CAs (certificate authorities) for you.

However, if you provide a CA for the cluster then Cluster API will be able to generate a kubeconfig secret. This is useful if you have a custom CA or do not want to use the bootstrap provider’s generated self-signed CA.

Alternatively can entirely bypass Cluster API generating a kubeconfig entirely if you provide a kubeconfig secret formatted as described below.

Machine Controller

The Machine controller’s main responsibilities are:

• Setting an OwnerReference on:
  • Each Machine object to the Cluster object.
  • The associated BootstrapConfig object.
  • The associated InfrastructureMachine object.
• Copy data from BootstrapConfig.Status.DataSecretName to Machine.Spec.Bootstrap.DataSecretName if Machine.Spec.Bootstrap.DataSecretName is empty.
• Setting NodeRefs to be able to associate machines and kubernetes nodes.
• Deleting Nodes in the target cluster when the associated machine is deleted.
• Cleanup of related objects.
• Keeping the Machine’s Status object up to date with the InfrastructureMachine’s Status object.
• Finding Kubernetes nodes matching the expected providerID in the workload cluster.

After the machine controller sets the OwnerReferences on the associated objects, it waits for the bootstrap and infrastructure objects referenced by the machine to have the Status.Ready field set to true. When the infrastructure object is ready, the machine controller will attempt to read its Spec.ProviderID and copy it into Machine.Spec.ProviderID.

The machine controller uses the kubeconfig for the new workload cluster to watch new nodes coming up. When a node appears with Node.Spec.ProviderID matching Machine.Spec.ProviderID, the machine controller transitions the associated machine into the Provisioned state. When the infrastructure ref is also Ready, the machine controller marks the machine as Running.

Contracts

Cluster API

Cluster associations are made via labels.

Expected labels

Bootstrap provider

The BootstrapConfig object must have a status object.

To override the bootstrap provider, a user (or external system) can directly set the Machine.Spec.Bootstrap.Data field. This will mark the machine as ready for bootstrapping and no bootstrap data will be copied from the BootstrapConfig object.

Required status fields

The status object must have several fields defined:

• ready - a boolean field indicating the bootstrap config data is generated and ready for use.
• dataSecretName - a string field referencing the name of the secret that stores the generated bootstrap data.

Optional status fields

The status object may define several fields that do not affect functionality if missing:

• failureReason - a string field explaining why a fatal error has occurred, if possible.
• failureMessage - a string field that holds the message contained by the error.

Example:

kind: MyBootstrapProviderConfig
apiVersion: bootstrap.cluster.x-k8s.io/v1alpha3
status:
    ready: true
    dataSecretName: "MyBootstrapSecret"

Infrastructure provider

The InfrastructureMachine object must have both spec and status objects.

Required spec fields

The spec object must at least one field defined:

• providerID - a cloud provider ID identifying the machine.

Required status fields

The status object must at least one field defined:

• ready - a boolean field indicating if the infrastructure is ready to be used or not.

Optional status fields

The status object may define several fields that do not affect functionality if missing:

• failureReason - is a string that explains why a fatal error has occurred, if possible.
• failureMessage - is a string that holds the message contained by the error.

Example:

kind: MyMachine
apiVersion: infrastructure.cluster.x-k8s.io/v1alpha3
spec:
    providerID: cloud:////my-cloud-provider-id
status:
    ready: true

Secrets

The Machine controller will create a secret or use an existing secret in the following format:

MachineSet

A MachineSet is an immutable abstraction over Machines.

Its main responsibilities are:

• Adopting unowned Machines that aren’t assigned to a MachineSet
• Adopting unmanaged Machines that aren’t assigned a Cluster
• Booting a group of N machines
  • Monitoring the status of those booted machines

MachineDeployment

A MachineDeployment orchestrates deployments over a fleet of MachineSets.

Its main responsibilities are:

• Adopting matching MachineSets not assigned to a MachineDeployment
• Adopting matching MachineSets not assigned to a Cluster
• Managing the Machine deployment process
  • Scaling up new MachineSets when changes are made
  • Scaling down old MachineSets when newer MachineSets replace them
• Updating the status of MachineDeployment objects

MachineHealthCheck

A MachineHealthCheck is responsible for remediating unhealthy Machines.

Its main responsibilities are:

• Checking the health of Nodes in the workload clusters against a list of unhealthy conditions
• Remediating Machine’s for Nodes determined to be unhealthy

Control Plane Controller

The Control Plane controller’s main responsibilities are:

• Managing a set of machines that represent a Kubernetes control plane.
• Provide information about the state of the control plane to downstream consumers.
• Create/manage a secret with the kubeconfig file for accessing the workload cluster.

A reference implementation is managed within the core Cluster API project as the Kubeadm control plane controller (KubeadmControlPlane). In this document, we refer to an example ImplementationControlPlane where not otherwise specified.

Contracts

Control Plane Provider

The general expectation of a control plane controller is to instantiate a Kubernetes control plane consisting of the following services:

Required Control Plane Services

• etcd
• Kubernetes API Server
• Kubernetes Controller Manager
• Kubernetes Scheduler

Optional Control Plane Services

• Cloud controller manager
• Cluster DNS (e.g. CoreDNS)
• Service proxy (e.g. kube-proxy)

Prohibited Services

• CNI - should be left to user to apply once control plane is instantiated.

Relationship to other Cluster API types

The Cluster controller will set an OwnerReference on the Control Plane. The Control Plane controller should normally take no action during reconciliation until it sees the ownerReference.

A Control Plane controller implementation should exit reconciliation until it sees cluster.spec.controlPlaneEndpoint populated.

The Cluster controller bubbles up status.ready into status.controlPlaneReady and status.initialized into a controlPlaneInitialized condition from the Control Plane CR.

The ImplementationControlPlane must rely on the existence of status.controlplaneEndpoint in its parent Cluster object.

CRD contracts

Required spec fields for implementations using replicas

• replicas - is an integer representing the number of desired replicas. In the KubeadmControlPlane, this represents the desired number of control plane machines.

• scale subresource with the following signature:

scale:
  labelSelectorPath: .status.selector
  specReplicasPath: .spec.replicas
  statusReplicasPath: .status.replicas
status: {}

More information about the scale subresource can be found in the Kubernetes documentation.

Required spec fields for implementations using version

• version - is a string representing the Kubernetes version to be used by the control plane machines. The value must be a valid semantic version; also if the value provided by the user does not start with the v prefix, it must be added.

Required spec fields for implementations using Machines

• machineTemplate - is a struct containing details of the control plane machine template.

• machineTemplate.metadata - is a struct containing info about metadata for control plane machines.

• machineTemplate.metadata.labels - is a map of string keys and values that can be used to organize and categorize control plane machines.

• machineTemplate.metadata.annotations - is a map of string keys and values containing arbitrary metadata to be applied to control plane machines.

• machineTemplate.infrastructureRef - is a corev1.ObjectReference to a custom resource offered by an infrastructure provider. The namespace in the ObjectReference must be in the same namespace of the control plane object.

• machineTemplate.nodeDrainTimeout - is a *metav1.Duration defining the total amount of time that the controller will spend on draining a control plane node. The default value is 0, meaning that the node can be drained without any time limitations.

• machineTemplate.nodeDeletionTimeout - is a *metav1.Duration defining how long the controller will attempt to delete the Node that is hosted by a Machine after the Machine is marked for deletion. A duration of 0 will retry deletion indefinitely. It defaults to 10 seconds on the Machine.

Required status fields

The ImplementationControlPlane object must have a status object.

The status object must have the following fields defined:

Required status fields for implementations using replicas

Where the ImplementationControlPlane has a concept of replicas, e.g. most high availability control planes, then the status object must have the following fields defined:

Required status fields for implementations using version

• version - is a string representing the minimum Kubernetes version for the control plane machines in the cluster. NOTE: The minimum Kubernetes version, and more specifically the API server version, will be used to determine when a control plane is fully upgraded (spec.version == status.version) and for enforcing Kubernetes version skew policies in managed topologies.

Optional status fields

The status object may define several fields:

• failureReason - is a string that explains why an error has occurred, if possible.
• failureMessage - is a string that holds the message contained by the error.
• externalManagedControlPlane - is a bool that should be set to true if the Node objects do not exist in the cluster. For example, managed control plane providers for AKS, EKS, GKE, etc, should set this to true. Leaving the field undefined is equivalent to setting the value to false.

Example usage

apiVersion: controlplane.cluster.x-k8s.io/v1beta1
kind: KubeadmControlPlane
metadata:
  name: kcp-1
  namespace: default
spec:
  machineTemplate:
    infrastructureRef:
      apiVersion: infrastructure.cluster.x-k8s.io/v1beta1
      kind: DockerMachineTemplate
      name: docker-machine-template-1
      namespace: default
  replicas: 3
  version: v1.21.2

Kubeconfig management

Control Plane providers are expected to create and maintain a Kubeconfig secret for operators to gain initial access to the cluster. If a provider uses client certificates for authentication in these Kubeconfigs, the client certificate should be kept with a reasonably short expiration period and periodically regenerated to keep a valid set of credentials available. As an example, the Kubeadm Control Plane provider uses a year of validity and refreshes the certificate after 6 months.

MachinePool Controller

The MachinePool controller’s main responsibilities are:

• Setting an OwnerReference on each MachinePool object to:
  • The associated Cluster object.
  • The associated BootstrapConfig object.
  • The associated InfrastructureMachinePool object.
• Copy data from BootstrapConfig.Status.DataSecretName to MachinePool.Spec.Template.Spec.Bootstrap.DataSecretName if MachinePool.Spec.Template.Spec.Bootstrap.DataSecretName is empty.
• Setting NodeRefs on MachinePool instances to be able to associate them with kubernetes nodes.
• Deleting Nodes in the target cluster when the associated MachinePool instance is deleted.
• Keeping the MachinePool’s Status object up to date with the InfrastructureMachinePool’s Status object.
• Finding Kubernetes nodes matching the expected providerIDs in the workload cluster.

After the machine pool controller sets the OwnerReferences on the associated objects, it waits for the bootstrap and infrastructure objects referenced by the machine to have the Status.Ready field set to true. When the infrastructure object is ready, the machine pool controller will attempt to read its Spec.ProviderIDList and copy it into MachinePool.Spec.ProviderIDList.

The machine pool controller uses the kubeconfig for the new workload cluster to watch new nodes coming up. When a node appears with a Node.Spec.ProviderID in MachinePool.Spec.ProviderIDList, the machine pool controller increments the number of ready replicas. When all replicas are ready and the infrastructure ref is also Ready, the machine pool controller marks the machine pool as Running.

Contracts

Cluster API

Cluster associations are made via labels.

Expected labels

Bootstrap provider

The BootstrapConfig object must have a status object.

To override the bootstrap provider, a user (or external system) can directly set the MachinePool.Spec.Bootstrap.DataSecretName field. This will mark the machine as ready for bootstrapping and no bootstrap data secret name will be copied from the BootstrapConfig object.

Required status fields

The status object must have several fields defined:

• ready - a boolean field indicating the bootstrap config data is generated and ready for use.
• dataSecretName - a string field referencing the name of the secret that stores the generated bootstrap data.

Optional status fields

The status object may define several fields that do not affect functionality if missing:

• failureReason - a string field explaining why a fatal error has occurred, if possible.
• failureMessage - a string field that holds the message contained by the error.

Example:

kind: MyBootstrapProviderConfig
apiVersion: bootstrap.cluster.x-k8s.io/v1alpha3
status:
    ready: true
    dataSecretName: "MyBootstrapSecret"

Infrastructure provider

The InfrastructureMachinePool object must have both spec and status objects.

Required spec fields

The spec object must have at least one field defined:

• providerIDList - the list of cloud provider IDs identifying the instances.

Required status fields

The status object must have at least one field defined:

• ready - a boolean field indicating if the infrastructure is ready to be used or not.

Optional status fields

The status object may define several fields that do not affect functionality if missing:

• failureReason - is a string that explains why a fatal error has occurred, if possible.
• failureMessage - is a string that holds the message contained by the error.

Example:

kind: MyMachinePool
apiVersion: infrastructure.cluster.x-k8s.io/v1alpha3
spec:
    providerIDList:
      - cloud:////my-cloud-provider-id-0
      - cloud:////my-cloud-provider-id-1
status:
    ready: true

Secrets

The machine pool controller will use a secret in the following format:

ClusterTopology Controller

The ClusterTopology controller reconciles the managed topology of a Cluster, as shown in the following diagram.

Its main responsibilities are to:

1. Reconcile Clusters based on templates defined in a ClusterClass and managed topology.
2. Create, update, delete managed topologies by continuously reconciling the topology managed resources.
3. Reconcile Cluster-specific customizations of a ClusterClass

The high level workflow of ClusterTopology reconciliation is shown below.

Additional information

• See ClusterClass proposal

ClusterResourceSet Controller

The ClusterResourceSet provides a mechanism for applying resources - e.g. pods, deployments, daemonsets, secrets, configMaps - to a cluster once it is created.

Its main responsibility is to automatically apply a set of resources to newly-created and existing Clusters. Resources will be applied only once.

Additional information

• See ClusterResourceSet proposal

Metadata propagation

Cluster API controllers implement consistent metadata (labels & annotations) propagation across the core API resources. This behaviour tries to be consistent with Kubernetes apps/v1 Deployment and ReplicaSet. New providers should behave accordingly fitting within the following pattern:

KubeadmControlPlane

Top-level labels and annotations do not propagate at all.

• .labels => Not propagated.
• .annotations => Not propagated.

MachineTemplate labels and annotations propagate to Machines, InfraMachines and BootstrapConfigs.

• .spec.machineTemplate.metadata.labels => Machine.labels, InfraMachine.labels, BootstrapConfig.labels
• .spec.machineTemplate.metadata.annotations => Machine.annotations, InfraMachine.annotations, BootstrapConfig.annotations

MachineDeployment

Top-level labels do not propagate at all. Top-level annotations propagate to MachineSets top-level annotations.

• .labels => Not propagated.
• .annotations => MachineSet.annotations

Template labels propagate to MachineSets top-level and MachineSets template metadata. Template annotations propagate to MachineSets template metadata.

• .spec.template.metadata.labels => MachineSet.labels, MachineSet.spec.template.metadata.labels
• .spec.template.metadata.annotations => MachineSet.spec.template.metadata.annotations

MachineSet

Top-level labels and annotations do not propagate at all.

• .labels => Not propagated.
• .annotations => Not propagated.

Template labels and annotations propagate to Machines, InfraMachines and BootstrapConfigs.

• .spec.template.metadata.labels => Machine.labels, InfraMachine.labels, BootstrapConfig.labels
• .spec.template.metadata.annotations => Machine.annotations, InfraMachine.annotations, BootstrapConfig.annotations

Multi tenancy

Multi tenancy in Cluster API defines the capability of an infrastructure provider to manage different credentials, each one of them corresponding to an infrastructure tenant.

Contract

In order to support multi tenancy, the following rule applies:

• Infrastructure providers MUST be able to manage different sets of credentials (if any)
• Providers SHOULD deploy and run any kind of webhook (validation, admission, conversion) following Cluster API codebase best practices for the same release.
• Providers MUST create and publish a {type}-component.yaml accordingly.

Support running multiple instances of the same provider

Up until v1alpha3, the need of supporting multiple credentials was addressed by running multiple instances of the same provider, each one with its own set of credentials while watching different namespaces.

However, running multiple instances of the same provider proved to be complicated for several reasons:

• Complexity in packaging providers: CustomResourceDefinitions (CRD) are global resources, these may have a reference to a service that can be used to convert between CRD versions (conversion webhooks). Only one of these services should be running at any given time, this requirement led us to previously split the webhooks code to a different deployment and namespace.
• Complexity in deploying providers, due to the requirement to ensure consistency of the management cluster, e.g. controllers watching the same namespaces.
• The introduction of the concept of management groups in clusterctl, with impacts on the user experience/documentation.
• Complexity in managing co-existence of different versions of the same provider while there could be only one version of CRDs and webhooks. Please note that this constraint generates a risk, because some version of the provider de-facto were forced to run with CRDs and webhooks deployed from a different version.

Nevertheless, we want to make it possible for users to choose to deploy multiple instances of the same providers, in case the above limitations/extra complexity are acceptable for them.

Contract

In order to make it possible for users to deploy multiple instances of the same provider:

• Providers MUST support the --namespace flag in their controllers.
• Providers MUST support the --watch-filter flag in their controllers.

⚠️ Users selecting this deployment model, please be aware:

• Support should be considered best-effort.
• Cluster API (incl. every provider managed under kubernetes-sigs) won’t release a specialized components file supporting the scenario described above; however, users should be able to create such deployment model from the /config folder.
• Cluster API (incl. every provider managed under kubernetes-sigs) testing infrastructure won’t run test cases with multiple instances of the same provider.

In conclusion, giving the increasingly complex task that is to manage multiple instances of the same controllers, the Cluster API community may only provide best effort support for users that choose this model.

As always, if some members of the community would like to take on the responsibility of managing this model, please reach out through the usual communication channels, we’ll make sure to guide you in the right path.

Provider Implementers

Version migration

The following pages provide an overview of relevant changes between versions of Cluster API and their direct successors. These guides are intended to assist maintainers of other providers and consumers of the Go API in upgrading from one version of Cluster API to a subsequent version.

• v0.3 to v0.4
• v0.4 to v1.0
• v1.0 to v1.1
• v1.1 to v1.2

Cluster API v0.3 compared to v0.4

Minimum Go version

• The Go version used by Cluster API is now Go 1.16+
  • In case cloudbuild is used to push images, please upgrade to gcr.io/k8s-staging-test-infra/gcb-docker-gcloud:v20211013-1be7868d8b in the cloudbuild YAML files.

Controller Runtime version

• The Controller Runtime version is now v0.9.+

Controller Tools version (if used)

• The Controller Tools version is now v0.6.+

Kind version

• The KIND version used for this release is v0.11.x

⚠ Go Module changes ⚠

• The test folder now ships with its own Go module sigs.k8s.io/cluster-api/test.
• The module is going to be tagged and versioned as part of the release.
• Folks importing the test e2e framework or the docker infrastructure provider need to import the new module.
  • When imported, the test module version should always match the Cluster API one.
  • Add the following line in go.mod to replace the cluster-api dependency in the test module (change the version to your current Cluster API version):

  replace sigs.k8s.io/cluster-api => sigs.k8s.io/cluster-api v0.4.x
  

• The CAPD go module in test/infrastructure/docker has been removed.

Klog version

• The klog package used has been upgraded to v2.5.x. It is recommended that all providers also switch to using v2.

  • Change import k8s.io/klog to import k8s.io/klog/v2
  • Change import k8s.io/klog/klogr to import k8s.io/klog/v2/klogr
  • Update go.mod to k8s.io/klog/v2 v2.5.0
  • Run go mod tidy to ensure all dependencies are updated.

The controllers.DeleteNodeAnnotation constant has been removed

• This annotation cluster.k8s.io/delete-machine was originally deprecated a while ago when we moved our types under the x-k8s.io domain.

The controllers.DeleteMachineAnnotation has been moved to v1alpha4.DeleteMachineAnnotation

• This annotation was previously exported as part of the controllers package, instead this should be a versioned annotation under the api packages.

Align manager flag names with upstream Kubernetes components

• Rename --metrics-addr to --metrics-bind-addr
• Rename --leader-election to --leader-elect

util.ManagerDelegatingClientFunc has been removed

This function was originally used to generate a delegating client when creating a new manager.

Controller Runtime v0.9.x now uses a ClientBuilder in its Options struct and it uses the delegating client by default under the hood, so this can be now removed.

Use to Controller Runtime’s new fake client builder

• The functions fake.NewFakeClientWithScheme and fake.NewFakeClient have been deprecated.
• Switch to fake.NewClientBuilder().WithObjects().Build() instead, which provides a cleaner interface to create a new fake client with objects, lists, or a scheme.

Multi tenancy

Up until v1alpha3, the need of supporting multiple credentials was addressed by running multiple instances of the same provider, each one with its own set of credentials while watching different namespaces.

Starting from v1alpha4 instead we are going require that an infrastructure provider should manage different credentials, each one of them corresponding to an infrastructure tenant.

see Multi-tenancy and Support multiple instances for more details.

Specific changes related to this topic will be detailed in this document.

Change types with arrays of pointers to custom objects

The conversion-gen code from the 1.20.x release onward generates incorrect conversion functions for types having arrays of pointers to custom objects. Change the existing types to contain objects instead of pointer references.

Optional flag for specifying webhook certificates dir

Add optional flag --webhook-cert-dir={string-value} which allows user to specify directory where webhooks will get tls certificates. If flag has not provided, default value from controller-runtime should be used.

Required kustomize changes to have a single manager watching all namespaces and answer to webhook calls

In an effort to simplify the management of Cluster API components, and realign with Kubebuilder configuration, we’re requiring some changes to move all webhooks back into a single deployment manager, and to allow Cluster API watch all namespaces it manages. For a /config folder reference, please use the testdata in the Kubebuilder project: https://github.com/kubernetes-sigs/kubebuilder/tree/master/testdata/project-v3/config

Pre-requisites

Provider’s /config folder has the same structure of /config folder in CAPI controllers.

Changes in the /config/webhook folder:

1. Edit the /config/webhook/kustomization.yaml file:
   • Remove the namespace: configuration
   • In the resources: list, remove the following items:

     - ../certmanager
     - ../manager
     

   • Remove the patchesStrategicMerge list
   • Copy the vars list into a temporary file to be used later in the process
   • Remove the vars list
2. Edit the config/webhook/kustomizeconfig.yaml file:
   • In the varReference: list, remove the item with kind: Deployment
3. Edit the /config/webhook/manager_webhook_patch.yaml file and remove the args list from the manager container.
4. Move the following files to the /config/default folder
   • /config/webhook/manager_webhook_patch.yaml
   • /config/webhook/webhookcainjection_patch.yaml

Changes in the /config/manager folder:

1. Edit the /config/manager/kustomization.yaml file:
   • Remove the patchesStrategicMerge list
2. Edit the /config/manager/manager.yaml file:
   • Add the following items to the args list for the manager container list

   - "--metrics-bind-addr=127.0.0.1:8080"
   

   • Verify that feature flags required by your container are properly set (as it was in /config/webhook/manager_webhook_patch.yaml).
3. Edit the /config/manager/manager_auth_proxy_patch.yaml file:
   • Remove the patch for the container with name manager
4. Move the following files to the /config/default folder
   • /config/manager/manager_auth_proxy_patch.yaml
   • /config/manager/manager_image_patch.yaml
   • /config/manager/manager_pull_policy.yaml

Changes in the /config/default folder:

1. Create a file named /config/default/kustomizeconfig.yaml with the following content:

   # This configuration is for teaching kustomize how to update name ref and var substitution
   varReference:
   - kind: Deployment
     path: spec/template/spec/volumes/secret/secretName
   

2. Edit the /config/default/kustomization.yaml file:
   • Add the namePrefix and the commonLabels configuration values copying values from the /config/kustomization.yaml file
   • In the bases: list, add the following items:

     - ../crd
     - ../certmanager
     - ../webhook
     

   • Add the patchesStrategicMerge: list, with the following items:

     - manager_auth_proxy_patch.yaml
     - manager_image_patch.yaml
     - manager_pull_policy.yaml
     - manager_webhook_patch.yaml
     - webhookcainjection_patch.yaml
     

   • Add a vars: configuration using the value from the temporary file created while modifying /config/webhook/kustomization.yaml
   • Add the configurations: list with the following items:

     - kustomizeconfig.yaml
     

Changes in the /config folder:

1. Remove the /config/kustomization.yaml file
2. Remove the /config/patch_crd_webhook_namespace.yaml file

Changes in the main.go file:

1. Change default value for the flags webhook-port flag to 9443
2. Change your code so all the controllers and the webhooks are started no matter if the webhooks port selected.

Other changes:

• makefile
  • update all the references for /config/manager/manager_image_patch.yaml to /config/default/manager_image_patch.yaml
  • update all the references for /config/manager/manager_pull_policy.yaml to /config/default/manager_pull_policy.yaml
  • update all the call to kustomize targeting /config to target /config/default instead.
• E2E config files
  • update provider sources reading from /config to read from /config/default instead.
• clusterctl-settings.json file
  • if the configFolder value is defined, update from /config to /config/default.

Upgrade cert-manager to v1.1.0

NB. instructions assumes “Required kustomize changes to have a single manager watching all namespaces and answer to webhook calls” should be executed before this changes.

Changes in the /config/certmanager folder:

1. Edit the /config/certmanager/certificate.yaml file and replace all the occurrences of cert-manager.io/v1alpha2 with cert-manager.io/v1

Changes in the /config/default folder:

1. Edit the /config/default/kustomization.yaml file and replace all the occurencies of

         kind: Certificate
         group: cert-manager.io
         version: v1alpha2
   

   with

         kind: Certificate
         group: cert-manager.io
         version: v1
   

Support the cluster.x-k8s.io/watch-filter label and watch-filter flag.

• A new label cluster.x-k8s.io/watch-filter provides the ability to filter the controllers to only reconcile objects with a specific label.
• A new flag watch-filter enables users to specify the label value for the cluster.x-k8s.io/watch-filter label on controller boot.
• The flag which enables users to set the flag value can be structured like this:

  	fs.StringVar(&watchFilterValue, "watch-filter", "", fmt.Sprintf("Label value that the controller watches to reconcile cluster-api objects. Label key is always %s. If unspecified, the controller watches for all cluster-api objects.", clusterv1.WatchLabel))
  

• The ResourceNotPausedAndHasFilterLabel predicate is a useful helper to check for the pause annotation and the filter label easily:

  c, err := ctrl.NewControllerManagedBy(mgr).
    	For(&clusterv1.MachineSet{}).
    	Owns(&clusterv1.Machine{}).
    	Watches(
    		&source.Kind{Type: &clusterv1.Machine{}},
    		handler.EnqueueRequestsFromMapFunc(r.MachineToMachineSets),
    	).
    	WithOptions(options).
    	WithEventFilter(predicates.ResourceNotPausedAndHasFilterLabel(ctrl.LoggerFrom(ctx), r.WatchFilterValue)).
    	Build(r)
    if err != nil {
    	return errors.Wrap(err, "failed setting up with a controller manager")
    }
  

Required changes to have individual service accounts for controllers.

1. Create a new service account such as:

apiVersion: v1
kind: ServiceAccount
metadata:
  name: manager
namespace: system

2. Change the subject of the managers ClusterRoleBinding to match:

subjects:
- kind: ServiceAccount
  name: manager
  namespace: system

3. Add the correct serviceAccountName to the manager deployment:

serviceAccountName: manager

Percentage String or Int API input will fail with a string different from an integer with % appended.

MachineDeployment.Spec.Strategy.RollingUpdate.MaxSurge, MachineDeployment.Spec.Strategy.RollingUpdate.MaxUnavailable and MachineHealthCheck.Spec.MaxUnhealthy would have previously taken a String value with an integer character in it e.g “3” as a valid input and process it as a percentage value. Only String values like “3%” or Int values e.g 3 are valid input values now. A string not matching the percentage format will fail, e.g “3”.

Required change to support externally managed infrastructure.

• A new annotation cluster.x-k8s.io/managed-by has been introduced that allows cluster infrastructure to be managed externally.
• When this annotation is added to an InfraCluster resource, the controller for these resources should not reconcile the resource.
• The ResourceIsNotExternallyManaged predicate is a useful helper to check for the annotation and the filter the resource easily:

  c, err := ctrl.NewControllerManagedBy(mgr).
    	For(&providerv1.InfraCluster{}).
    	Watches(...).
    	WithOptions(options).
    	WithEventFilter(predicates.ResourceIsNotExternallyManaged(ctrl.LoggerFrom(ctx))).
    	Build(r)
    if err != nil {
    	return errors.Wrap(err, "failed setting up with a controller manager")
    }
  

• Note: this annotation also has to be checked in other cases, e.g. when watching for the Cluster resource.

MachinePool API group changed to cluster.x-k8s.io

MachinePool is today an experiment, and the API group we originally decided to pick was exp.cluster.x-k8s.io. Given that the intent is in the future to move MachinePool to the core API group, we changed the experiment to use cluster.x-k8s.io group to avoid future breaking changes.

All InfraMachinePool implementations should be moved to infrastructure.cluster.x-k8s.io. See DockerMachinePool for an example.

Note that MachinePools are still experimental after this change and should still be feature gated.

Golangci-lint configuration

There were a lot of new useful linters added to .golangci.yml. Of course it’s not mandatory to use golangci-lint or a similar configuration, but it might make sense regardless. Please note there was previously an error in the exclude configuration which has been fixed in #4657. As this configuration has been duplicated in a few other providers, it could be that you’re also affected.

test/helpers.NewFakeClientWithScheme has been removed

This function used to create a new fake client with the given scheme for testing, and all the objects given as input were initialized with a resource version of “1”. The behavior of having a resource version in fake client has been fixed in controller-runtime, and this function isn’t needed anymore.

Required kustomize changes to remove kube-rbac-proxy

NB. instructions assumes “Required kustomize changes to have a single manager watching all namespaces and answer to webhook calls” should be executed before this changes.

Changes in the /config/default folder:

1. Edit /config/default/kustomization.yaml and remove the manager_auth_proxy_patch.yaml item from the patchesStrategicMerge list.
2. Delete the /config/default/manager_auth_proxy_patch.yaml file.

Changes in the /config/manager folder:

1. Edit /config/manager/manager.yaml and remove the --metrics-bind-addr=127.0.0.1:8080 arg from the args list.

Changes in the /config/rbac folder:

1. Edit /config/rbac/kustomization.yaml and remove following items from the resources list.
   • auth_proxy_service.yaml
   • auth_proxy_role.yaml
   • auth_proxy_role_binding.yaml
2. Delete the /config/rbac/auth_proxy_service.yaml file.
3. Delete the /config/rbac/auth_proxy_role.yaml file.
4. Delete the /config/rbac/auth_proxy_role_binding.yaml file.

Changes in the main.go file:

1. Change the default value for the metrics-bind-addr from :8080 to localhost:8080

Required cluster template changes

• spec.infrastructureTemplate has been moved to spec.machineTemplate.infrastructureRef. Thus, cluster templates which include KubeadmControlPlane have to be adjusted accordingly.
• spec.nodeDrainTimeout has been moved to spec.machineTemplate.nodeDrainTimeout.

Required spec and status fields for Control Planes using ‘version’ for ClusterClass support

ControlPlane implementations using version must now include a ‘version’ field as defined below in both its spec and its status.

spec.version - is a string representing the Kubernetes version to be used by the control plane machines. The value must be a valid semantic version; also if the value provided by the user does not start with the v prefix, it must be added.

status.version - is a string representing the minimum Kubernetes version for the control plane machines in the cluster.

Please note that implementing these fields are a requirement for a control plane provider to be used with ClusterClass and managed topologies.

Required spec fields for Control Planes using ‘Machines’ for ClusterClass support

ControlPlane implementations that use an underlying MachineInfrastructure must now include a ‘machineTemplate’ as defined below, with subordinate fields, in its Spec.

machineTemplate - is a struct containing details of the control plane machine template.

Please note that implementing this field for control plane providers using machines is a requirement for ClusterClass and managed topologies to work consistently across all providers.

Cluster API v0.4 compared to v1.0

Minimum Go version

• The Go version used by Cluster API is still Go 1.16+

Controller Runtime version

• The Controller Runtime version is now v0.10.+

Controller Tools version (if used)

• The Controller Tools version is now v0.7.+

Kind version

• The KIND version used for this release is still v0.11.x

Conversion from v1alpha3 and v1alpha4 to v1beta1 types

The core ClusterAPI providers will support upgrade from v1alpha3 and v1alpha4 to v1beta1. Thus, conversions of API types from v1alpha3 and v1alpha4 to v1beta1 have been implemented. If other providers also want to support the upgrade from v1alpha3 and v1alpha4, the same conversions have to be implemented.

Certificates

The serving-cert certificates now have organization set to k8s-sig-cluster-lifecycle.

Removed items

API Fields

• ClusterTopologyLabelName, a ClusterClass related constant has been deprecated and removed. This label has been replaced by ClusterTopologyOwnedLabel.

• MachineNodeNameIndex has been removed from the common types in favor of api/v1beta1/index.MachineNodeNameField.

• MachineProviderNameIndex has been removed from common types in favor of api/v1beta1/index.MachineProviderIDField.

Clusterctl

• clusterctl config provider has been removed in favor of clusterctl generate provider.

• clusterctl config cluster has been removed in favor of clusterctl generate cluster.

Utils and other

• TemplateSuffix has been removed in favor of api/v1alpha4.TemplatePrefix.
• AddMachineNodeIndex has been removed in favor of api/v1alpha4/index.ByMachineNode
• GetMachineFromNode has been removed. This functionality is now private in the controllers package.
• ConverReferenceAPIContract has been removed in favor of UpdateReferenceAPIContract in the util/conversion package.
• ParseMajorMinorPatch has been removed in favor of ParseMajorMinorPatch in the util/version package.
• GetMachinesForCluster has been removed in favor of GetFilteredMachinesForCluster in the util/collection package.
• GetControlPlaneMachines has been removed in favor of FromMachines(machine).Filter(collections.ControlPlaneMachines(cluster.Name)) in the util/collection package.
• GetControlPlaneMachinesFromList has been removed in favor of FromMachineList(machines).Filter(collections.ControlPlaneMachines(cluster.Name)) in the util/collection package.
• GetCRDMetadataFromGVK has been removed in favor of GetGVKMetadata.
• Ensure your template resources support template.meta fields. Refer to the cluster and machine provider contract docs for more information. This is not required, but is recommended for consistency across the infrastructure providers as Cluster API graduates and opens up use cases where coordinating controllers can use labels and annotations from template infrastructure resources to do external provisioning or provide configuration information, e.g. IPAM support for vSphere / bare-metal.
• Labels and annotations from KubeadmControlPlane, MachineDeployment and MachineSet and their .spec.template.metadata fields are now selectively propagated to objects controlled by their respective controllers. Refer to metadata-propagation for more information.

⚠ LeaderElectionResourceLock change ⚠

The v1beta1 release uses “leases” instead of “configmapsleases” as the LeaderElectionResourceLock for all managers leader election including the core controllers, bootstrap and control plane kubeadm and the Docker provider. This has no user facing impact on brand-new clusters created as v1beta1. For Cluster API running clusters upgraded through clusterctl this should be ok given that we stop the old controllers. Users relying on custom upgrades procedures should ensure a migration to v1alpha4 (multilock “configmapsleases”) first, which will acquire a leader lock on both resources. After that, they can proceed migrating to v1beta1 (”leases”). As an additional safety step, these users should ensure the old controllers are stopped before running the new ones with the new lock mechanism. Otherwise, your controller might end up with multiple running instances that each acquired leadership through different resource locks during upgrades and thus act on the same resources concurrently.

Cluster API v1.0 compared to v1.1

This document provides an overview over relevant changes between ClusterAPI v1.0 and v1.1 for maintainer of other providers and consumers of our Go API.

Minimum Go version

• The Go version used by Cluster API is now Go 1.17+

Dependencies

Note: Only the most relevant dependencies are listed, k8s.io/ and ginkgo/gomega dependencies are kept in sync with the versions used by sigs.k8s.io/controller-runtime.

• sigs.k8s.io/controller-runtime: v0.10.x => v0.11.x
• k8s.io/*: v0.22.x => v0.23.x (derived from controller-runtime)
• github.com/go-logr/logr: v0.4.0 => v1.2.0 (derived from controller-runtime)
• k8s.io/klog/v2: v2.9.0 => v2.30.0 (derived from controller-runtime)
• sigs.k8s.io/controller-tools: v0.7.x => v0.8.x
• sigs.k8s.io/kind: v0.11.x => v0.11.x

Changes by Kind

Deprecation

• The Cluster and ClusterClass webhooks have been moved to the webhooks package. Thus, the following methods on Cluster and ClusterClass in api/v1beta1 are deprecated: SetupWebhookWithManager, Default, ValidateCreate, ValidateUpdate and ValidateDelete.
• The third_party/kubernetes-drain package is deprecated, as we’re now using k8s.io/kubectl/pkg/drain instead (PR).
• util/version.CompareWithBuildIdentifiers has been deprecated, please use util/version.Compare(a, b, WithBuildTags()) instead.
• The functions annotations.HasPausedAnnotation and annotations.HasSkipRemediationAnnotation have been deprecated, please use annotations.HasPaused and annotations.HasSkipRemediation respectively instead.

Removals

• KCPUpgradeSpec has been removed. Please use ClusterUpgradeConformanceSpec instead.

API Change

• Some controllers have been moved to internal to reduce their API surface. We now only surface what is necessary, e.g. the reconciler and the SetupWithManager func:

  • bootstrap/kubeadm/controllers
  • controllers part1 part2 part3
  • controlplane/kubeadm/controllers
  • exp/addons/controllers
  • test/infrastructure/docker/controllers
  • test/infrastructure/docker/exp/controllers
  • exp/controllers

• Following packages have been moved to internal

  • /test/infrastructure/docker/cloudinit
  • /test/infrastructure/docker/docker
  • /test/infrastructure/docker/third_party
  • /test/infrastructure/docker/exp/docker

Other

• ClusterClass:
  • clusterctl is now able to handle cluster templates with ClusterClasses (PR). Please check out the corresponding documentation in clusterctl provider contract If you have any further questions about writing ClusterClasses, please let us know.
  • e2e tests:
    • QuickStartSpec is now able to test clusters using ClusterClass. Please see this PR for an example on how to use it.
    • SelfHostedSpec is now able to test clusters using ClusterClass. Please see this PR for an example on how to use it.
• Test framework provides better logging in case of failures when creating the bootstrap kind cluster; in order to fully exploit this feature, it is required to pass the LogFolder parameter when calling CreateKindBootstrapClusterAndLoadImages. Please see this PR for an example on how to use it.
• The gci linter has been enabled to enforce consistent imports. As usual, feel free to take a look at our linter config, but of course it’s not mandatory to adopt it.
• The Tilt dev setup has been extended with:
  • an option to deploy Grafana, Loki and promtail
  • options to ease debugging of controllers (delve, profiler, metrics)

Cluster API v1.1 compared to v1.2

This document provides an overview over relevant changes between ClusterAPI v1.1 and v1.2 for maintainers of providers and consumers of our Go API.

Minimum Kubernetes version for the management cluster

• The minimum Kubernetes version that can be used for a management cluster is now 1.20.0
• The minimum Kubernetes version that can be used for a management cluster with ClusterClass is now 1.22.0

NOTE: compliance with minimum Kubernetes version is enforced both by clusterctl and when the CAPI controller starts.

Minimum Go version

• The Go version used by Cluster API is now Go 1.18.x
  • If you are using the gcb-docker-gcloud image in cloudbuild, bump to an image which is using Go 1.18, e.g.: gcr.io/k8s-staging-test-infra/gcb-docker-gcloud:v20220609-2e4c91eb7e.

Dependencies

Note: Only the most relevant dependencies are listed, k8s.io/ and ginkgo/gomega dependencies in ClusterAPI are kept in sync with the versions used by sigs.k8s.io/controller-runtime.

• sigs.k8s.io/controller-runtime: v0.11.x => v0.12.3
• sigs.k8s.io/controller-tools: v0.8.x => v0.9.x
• sigs.k8s.io/kind: v0.11.x => v0.14.x
• k8s.io/*: v0.23.x => v0.24.x (derived from controller-runtime)
• github.com/onsi/gomega: v0.17.0 => v0.18.1 (derived from controller-runtime)
• k8s.io/kubectl: v0.23.5 => 0.24.0

Changes by Kind

Deprecation

• util.MachinesByCreationTimestamp has been deprecated and will be removed in a future release.
• the topology.cluster.x-k8s.io/managed-field-paths annotation has been deprecated and will be removed in a future release.
• the experimentalRetryJoin field in the KubeadmConfig and, as they compose the same types, KubeadmConfigTemplate, KubeadmControlPlane and KubeadmControlPlaneTemplate, has been deprecated and will be removed in a future release.

Removals

• The third_party/kubernetes-drain package has been removed, as we’re now using k8s.io/kubectl/pkg/drain instead (PR).
• util/version.CompareWithBuildIdentifiers has been removed, please use util/version.Compare(a, b, WithBuildTags()) instead.
• The functions annotations.HasPausedAnnotation and annotations.HasSkipRemediationAnnotation have been removed, please use annotations.HasPaused and annotations.HasSkipRemediation respectively instead.
• ObjectMeta.ClusterName has been removed from k8s.io/apimachinery/pkg/apis/meta/v1.

golang API Changes

• util.ClusterToInfrastructureMapFuncWithExternallyManagedCheck was removed and the externally managed check was added to util.ClusterToInfrastructureMapFunc, which required changing its signature. Users of the former simply need to start using the latter and users of the latter need to add the new arguments to their call.
• conditions.NewPatch from the “sigs.k8s.io/cluster-api/util/conditions” package has had its return type modified. Previously the function returned Patch. It now returns (Patch, error). Users of NewPatch need to be update usages to handle the error.

Required API Changes for providers

• ClusterClass and managed topologies are now using Server Side Apply to properly manage other controllers like CAPA/CAPZ coauthoring slices, see #6320. In order to take advantage of this feature providers are required to add marker to their API types as described in merge-strategy. NOTE: the change will cause a rollout on existing clusters created with ClusterClass

  E.g. in CAPA

  // +optional
  Subnets Subnets `json:"subnets,omitempty"
  

  Must be modified into:

  // +optional
  // +listType=map
  // +listMapKey=id
  Subnets Subnets `json:"subnets,omitempty"
  

• Server Side Apply implementation in ClusterClass and managed topologies requires to dry-run changes on templates. If infrastructure or bootstrap providers have implemented immutability checks in their InfrastructureMachineTemplate or BootstrapConfigTemplate webhooks, it is required to implement the following changes in order to prevent dry-run to return errors. The implementation requires sigs.k8s.io/controller-runtime in version >= v0.12.3.

  E.g. in CAPD following changes should be applied to the DockerMachineTemplate webhook:

  + type DockerMachineTemplateWebhook struct{}
  
  + func (m *DockerMachineTemplateWebhook) SetupWebhookWithManager(mgr ctrl.Manager) error {
  - func (m *DockerMachineTemplate) SetupWebhookWithManager(mgr ctrl.Manager) error {
        return ctrl.NewWebhookManagedBy(mgr).
  -         For(m).
  +         For(&DockerMachineTemplate{}).
  +         WithValidator(m).
            Complete()
  }
  
    // +kubebuilder:webhook:verbs=create;update,path=/validate-infrastructure-cluster-x-k8s-io-v1beta1-dockermachinetemplate,mutating=false,failurePolicy=fail,matchPolicy=Equivalent,groups=infrastructure.cluster.x-k8s.io,resources=dockermachinetemplates,versions=v1beta1,name=validation.dockermachinetemplate.infrastructure.cluster.x-k8s.io,sideEffects=None,admissionReviewVersions=v1;v1beta1
  
  + var _ webhook.CustomValidator = &DockerMachineTemplateWebhook{}
  - var _ webhook.Validator = &DockerMachineTemplate{}
  
  + func (*DockerMachineTemplateWebhook) ValidateCreate(ctx context.Context, _ runtime.Object) error {
  - func (m *DockerMachineTemplate) ValidateCreate() error {
        ...
    }
  
  + func (*DockerMachineTemplateWebhook) ValidateUpdate(ctx context.Context, oldRaw runtime.Object, newRaw runtime.Object) error {
  +     newObj, ok := newRaw.(*DockerMachineTemplate)
  +     if !ok {
  +         return apierrors.NewBadRequest(fmt.Sprintf("expected a DockerMachineTemplate but got a %T", newRaw))
  +     }
  - func (m *DockerMachineTemplate) ValidateUpdate(oldRaw runtime.Object) error {
        oldObj, ok := oldRaw.(*DockerMachineTemplate)
        if !ok {
            return apierrors.NewBadRequest(fmt.Sprintf("expected a DockerMachineTemplate but got a %T", oldRaw))
        }
  +     req, err := admission.RequestFromContext(ctx)
  +     if err != nil {
  +       return apierrors.NewBadRequest(fmt.Sprintf("expected a admission.Request inside context: %v", err))
  +     }
        ...
        // Immutability check
  +     if !topology.ShouldSkipImmutabilityChecks(req, newObj) &&
  +        !reflect.DeepEqual(newObj.Spec.Template.Spec, oldObj.Spec.Template.Spec) {
  -     if !reflect.DeepEqual(m.Spec.Template.Spec, old.Spec.Template.Spec) {
            allErrs = append(allErrs, field.Invalid(field.NewPath("spec", "template", "spec"), m, dockerMachineTemplateImmutableMsg))
        }
        ...
    }
  
  + func (*DockerMachineTemplateWebhook) ValidateDelete(ctx context.Context, _ runtime.Object) error {
  - func (m *DockerMachineTemplate) ValidateDelete() error {
        ...
    }
  

NOTES:

• We are introducing a DockerMachineTemplateWebhook struct because we are going to use a controller runtime CustomValidator. This will allow to skip the immutability check only when the topology controller is dry running while preserving the validation behaviour for all other cases.
• By using CustomValidators it is possible to move webhooks to other packages, thus removing some controller runtime dependency from the API types. However, choosing to do so or not is up to the provider implementers and independent of this change.

Other

• Logging:

  • To align with the upstream Kubernetes community CAPI now configures logging via component-base/logs. This provides advantages like support for the JSON logging format (via --logging-format=json) and automatic deprecation of klog flags aligned to the upstream Kubernetes deprecation period.

    View main.go diff

    import (
      ...
    + "k8s.io/component-base/logs"
    + _ "k8s.io/component-base/logs/json/register"
    )
    
    var (
    	...
    +	logOptions = logs.NewOptions()
    )
    
    func init() {
    -	klog.InitFlags(nil)
    
    func InitFlags(fs *pflag.FlagSet) {
    +	logs.AddFlags(fs, logs.SkipLoggingConfigurationFlags())
    +	logOptions.AddFlags(fs)
    
    func main() {
    	...
    	pflag.Parse()
    
    +	if err := logOptions.ValidateAndApply(); err != nil {
    +		setupLog.Error(err, "unable to start manager")
    +		os.Exit(1)
    +	}
    +
    +	// klog.Background will automatically use the right logger.
    +	ctrl.SetLogger(klog.Background())
    -	ctrl.SetLogger(klogr.New())
    

    This change has been introduced in CAPI in the following PRs: #6072, #6190, #6602.
    Note: This change is not mandatory for providers, but highly recommended.

• Following E2E framework functions are now checking that machines are created in the expected failure domain (if defined); all E2E tests can now verify failure domains too.

  • ApplyClusterTemplateAndWait
  • WaitForControlPlaneAndMachinesReady
  • DiscoveryAndWaitForMachineDeployments

• The AssertControlPlaneFailureDomains function in the E2E test framework has been modified to allow proper failure domain testing.

• After investigating an issue we discovered that improper implementation of a check on cluster.status.infrastructureReady can lead to problems during cluster deletion. As a consequence, we recommend that all providers ensure:

  • The check for cluster.status.infrastructureReady=true usually existing at the beginning of the reconcile loop for control-plane providers is implemented after setting external objects ref;
  • The check for cluster.status.infrastructureReady=true usually existing at the beginning of the reconcile loop for infrastructure provider does not prevent the object to be deleted
    rif. PR #6183

• CAPI added support for the new control plane label and taint introduced by v1.24 with PR#5919. Providers should tolerate both control-plane and master taints for compatibility with v1.24 control planes. Further, if they use the label in their manager.yaml, it should be adjusted since v1.24 only adds the node-role.kubernetes.io/control-plane label. An example of such an accommodation can be seen in the capi-provider-aws manager.yaml

• cert-manager upgraded from v1.7.x to v1.10.1.

Provider contract

Cluster API defines a contract which requires providers to implement certain fields and patterns in their CRDs and controllers. This contract is required for providers to work correctly with Cluster API.

Cluster API defines the following contracts:

• Infrastructure provider contract
• Boostrap provider contract
• Control Plane provider contract
• Machine provider contract
• clusterctl provider contract
• Multi tenancy contract

API version labels

Providers MUST set cluster.x-k8s.io/<version> label on all Custom Resource Definitions related to Cluster API starting with v1alpha3. The label is a map from an API Version of Cluster API (contract) to your Custom Resource Definition versions. The value is a underscore-delimited (_) list of versions. Each value MUST point to an available version in your CRD Spec.

The label allows Cluster API controllers to perform automatic conversions for object references, the controllers will pick the last available version in the list if multiple versions are found. To apply the label to CRDs it’s possible to use commonLabels in your kustomize.yaml file, usually in config/crd.

In this example we show how to map a particular Cluster API contract version to your own CRD using Kustomize’s commonLabels feature, in your config/crd/kustomization.yaml:

commonLabels:
  cluster.x-k8s.io/v1alpha2: v1alpha1
  cluster.x-k8s.io/v1alpha3: v1alpha2
  cluster.x-k8s.io/v1beta1: v1beta1

An example of this is in the Kubeadm Bootstrap provider.

Improving and contributing to the contract

The definition of the contract between Cluster API and providers may be changed in future versions of Cluster API. The Cluster API maintainers welcome feedback and contributions to the contract in order to improve how it’s defined, its clarity and visibility to provider implementers and its suitability across the different kinds of Cluster API providers. To provide feedback or open a discussion about the provider contract please open an issue on the Cluster API repo or add an item to the agenda in the Cluster API community meeting.

Cluster Infrastructure Provider Specification

Overview

A cluster infrastructure provider supplies whatever prerequisites are necessary for running machines. Examples might include networking, load balancers, firewall rules, and so on.

Data Types

InfraCluster Resources

A cluster infrastructure provider must define an API type for “infrastructure cluster” resources. The type:

1. Must belong to an API group served by the Kubernetes apiserver
2. May be implemented as a CustomResourceDefinition, or as part of an aggregated apiserver
3. Must be namespace-scoped
4. Must have the standard Kubernetes “type metadata” and “object metadata”
5. Must have a spec field with the following:
   1. Required fields:
      1. controlPlaneEndpoint (apiEndpoint): the endpoint for the cluster’s control plane. apiEndpoint is defined as:
         • host (string): DNS name or IP address
         • port (int32): TCP port
6. Must have a status field with the following:
   1. Required fields:
      1. ready (boolean): indicates the provider-specific infrastructure has been provisioned and is ready
   2. Optional fields:
      1. failureReason (string): indicates there is a fatal problem reconciling the provider’s infrastructure; meant to be suitable for programmatic interpretation
      2. failureMessage (string): indicates there is a fatal problem reconciling the provider’s infrastructure; meant to be a more descriptive value than failureReason
      3. failureDomains (failureDomains): the failure domains that machines should be placed in. failureDomains is a map, defined as map[string]FailureDomainSpec. A unique key must be used for each FailureDomainSpec. FailureDomainSpec is defined as:
         • controlPlane (bool): indicates if failure domain is appropriate for running control plane instances.
         • attributes (map[string]string): arbitrary attributes for users to apply to a failure domain.

InfraClusterTemplate Resources

For a given InfraCluster resource, you should also add a corresponding InfraClusterTemplate resources:

// InfraClusterTemplateSpec defines the desired state of InfraClusterTemplate.
type InfraClusterTemplateSpec struct {
	Template InfraClusterTemplateResource `json:"template"`
}

// +kubebuilder:object:root=true
// +kubebuilder:resource:path=infraclustertemplates,scope=Namespaced,categories=cluster-api,shortName=ict
// +kubebuilder:storageversion

// InfraClusterTemplate is the Schema for the infraclustertemplates API.
type InfraClusterTemplate struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec InfraClusterTemplateSpec `json:"spec,omitempty"`
}

type InfraClusterTemplateResource struct {
	// Standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	// +optional
	ObjectMeta clusterv1.ObjectMeta `json:"metadata,omitempty"`
	Spec InfraClusterSpec `json:"spec"`
}

List Resources

For any resource, also add list resources, e.g.

//+kubebuilder:object:root=true

// InfraClusterList contains a list of InfraClusters.
type InfraClusterList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []InfraCluster `json:"items"`
}

//+kubebuilder:object:root=true

// InfraClusterTemplateList contains a list of InfraClusterTemplates.
type InfraClusterTemplateList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []InfraClusterTemplate `json:"items"`
}

Behavior

A cluster infrastructure provider must respond to changes to its “infrastructure cluster” resources. This process is typically called reconciliation. The provider must watch for new, updated, and deleted resources and respond accordingly.

The following diagram shows the typical logic for a cluster infrastructure provider:

Normal resource

1. If the resource is externally managed, exit the reconciliation
   1. The ResourceIsNotExternallyManaged predicate can be used to prevent reconciling externally managed resources
2. If the resource does not have a Cluster owner, exit the reconciliation
   1. The Cluster API Cluster reconciler populates this based on the value in the Cluster‘s spec.infrastructureRef field.
3. Add the provider-specific finalizer, if needed
4. Reconcile provider-specific cluster infrastructure
   1. If any errors are encountered, exit the reconciliation
5. If the provider created a load balancer for the control plane, record its hostname or IP in spec.controlPlaneEndpoint
6. Set status.ready to true
7. Set status.failureDomains based on available provider failure domains (optional)
8. Patch the resource to persist changes

Deleted resource

1. If the resource has a Cluster owner
   1. Perform deletion of provider-specific cluster infrastructure
   2. If any errors are encountered, exit the reconciliation
2. Remove the provider-specific finalizer from the resource
3. Patch the resource to persist changes

RBAC

Provider controller

A cluster infrastructure provider must have RBAC permissions for the types it defines. If you are using kubebuilder to generate new API types, these permissions should be configured for you automatically. For example, the AWS provider has the following configuration for its AWSCluster type:

// +kubebuilder:rbac:groups=infrastructure.cluster.x-k8s.io,resources=awsclusters,verbs=get;list;watch;create;update;patch;delete
// +kubebuilder:rbac:groups=infrastructure.cluster.x-k8s.io,resources=awsclusters/status,verbs=get;update;patch

A cluster infrastructure provider may also need RBAC permissions for other types, such as Cluster. If you need read-only access, you can limit the permissions to get, list, and watch. The AWS provider has the following configuration for retrieving Cluster resources:

// +kubebuilder:rbac:groups=cluster.x-k8s.io,resources=clusters;clusters/status,verbs=get;list;watch

Cluster API controllers

The Cluster API controller for Cluster resources is configured with full read/write RBAC permissions for all resources in the infrastructure.cluster.x-k8s.io API group. This group represents all cluster infrastructure providers for SIG Cluster Lifecycle-sponsored provider subprojects. If you are writing a provider not sponsored by the SIG, you must grant full read/write RBAC permissions for the “infrastructure cluster” resource in your API group to the Cluster API manager’s ServiceAccount. ClusterRoles can be granted using the aggregation label cluster.x-k8s.io/aggregate-to-manager: "true". The following is an example ClusterRole for a FooCluster resource:

apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  name: capi-foo-clusters
  labels:
    cluster.x-k8s.io/aggregate-to-manager: "true"
rules:
- apiGroups:
  - infrastructure.foo.com
  resources:
  - fooclusters
  verbs:
  - create
  - delete
  - get
  - list
  - patch
  - update
  - watch

Note, the write permissions allow the Cluster controller to set owner references and labels on the “infrastructure cluster” resources; they are not used for general mutations of these resources.

Machine Infrastructure Provider Specification

Overview

A machine infrastructure provider is responsible for managing the lifecycle of provider-specific machine instances. These may be physical or virtual instances, and they represent the infrastructure for Kubernetes nodes.

Data Types

A machine infrastructure provider must define an API type for “infrastructure machine” resources. The type:

1. Must belong to an API group served by the Kubernetes apiserver
2. May be implemented as a CustomResourceDefinition, or as part of an aggregated apiserver
3. Must be namespace-scoped
4. Must have the standard Kubernetes “type metadata” and “object metadata”
5. Must have a spec field with the following:
   1. Required fields:
      1. providerID (string): the identifier for the provider’s machine instance
   2. Optional fields:
      1. failureDomain (string): the string identifier of the failure domain the instance is running in for the purposes of backwards compatibility and migrating to the v1alpha3 FailureDomain support (where FailureDomain is specified in Machine.Spec.FailureDomain). This field is meant to be temporary to aid in migration of data that was previously defined on the provider type and providers will be expected to remove the field in the next version that provides breaking API changes, favoring the value defined on Machine.Spec.FailureDomain instead. If supporting conversions from previous types, the provider will need to support a conversion from the provider-specific field that was previously used to the failureDomain field to support the automated migration path.
6. Must have a status field with the following:
   1. Required fields:
      1. ready (boolean): indicates the provider-specific infrastructure has been provisioned and is ready
   2. Optional fields:
      1. failureReason (string): indicates there is a fatal problem reconciling the provider’s infrastructure; meant to be suitable for programmatic interpretation
      2. failureMessage (string): indicates there is a fatal problem reconciling the provider’s infrastructure; meant to be a more descriptive value than failureReason
      3. addresses (MachineAddress): a list of the host names, external IP addresses, internal IP addresses, external DNS names, and/or internal DNS names for the provider’s machine instance. MachineAddress is defined as: - type (string): one of Hostname, ExternalIP, InternalIP, ExternalDNS, InternalDNS - address (string)
7. Should have a conditions field with the following:
   1. A Ready condition to represent the overall operational state of the component. It can be based on the summary of more detailed conditions existing on the same object, e.g. instanceReady, SecurityGroupsReady conditions.

InfraMachineTemplate Resources

For a given InfraMachine resource, you should also add a corresponding InfraMachineTemplate resource:

// InfraMachineTemplateSpec defines the desired state of InfraMachineTemplate.
type InfraMachineTemplateSpec struct {
	Template InfraMachineTemplateResource `json:"template"`
}

// +kubebuilder:object:root=true
// +kubebuilder:resource:path=inframachinetemplates,scope=Namespaced,categories=cluster-api,shortName=imt
// +kubebuilder:storageversion

// InfraMachineTemplate is the Schema for the inframachinetemplates API.
type InfraMachineTemplate struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec InfraMachineTemplateSpec `json:"spec,omitempty"`
}

type InfraMachineTemplateResource struct {
	// Standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	// +optional
	ObjectMeta clusterv1.ObjectMeta `json:"metadata,omitempty"`
	Spec InfraMachineSpec `json:"spec"`
}

List Resources

For any resource, also add list resources, e.g.

//+kubebuilder:object:root=true

// InfraMachineList contains a list of InfraMachines.
type InfraMachineList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []InfraCluster `json:"items"`
}

//+kubebuilder:object:root=true

// InfraMachineTemplateList contains a list of InfraMachineTemplates.
type InfraMachineTemplateList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []InfraClusterTemplate `json:"items"`
}

Behavior

A machine infrastructure provider must respond to changes to its “infrastructure machine” resources. This process is typically called reconciliation. The provider must watch for new, updated, and deleted resources and respond accordingly.

The following diagram shows the typical logic for a machine infrastructure provider:

Normal resource

1. If the resource does not have a Machine owner, exit the reconciliation
   1. The Cluster API Machine reconciler populates this based on the value in the Machines‘s spec.infrastructureRef field
2. If the resource has status.failureReason or status.failureMessage set, exit the reconciliation
3. If the Cluster to which this resource belongs cannot be found, exit the reconciliation
4. Add the provider-specific finalizer, if needed
5. If the associated Cluster‘s status.infrastructureReady is false, exit the reconciliation
   1. Note: This check should not be blocking any further delete reconciliation flows.
   2. Note: This check should only be performed after appropriate owner references (if any) are updated.
6. If the associated Machine‘s spec.bootstrap.dataSecretName is nil, exit the reconciliation
7. Reconcile provider-specific machine infrastructure
   1. If any errors are encountered:
      1. If they are terminal failures, set status.failureReason and status.failureMessage
      2. Exit the reconciliation
   2. If this is a control plane machine, register the instance with the provider’s control plane load balancer (optional)
8. Set spec.providerID to the provider-specific identifier for the provider’s machine instance
9. Set status.ready to true
10. Set status.addresses to the provider-specific set of instance addresses (optional)
11. Set spec.failureDomain to the provider-specific failure domain the instance is running in (optional)
12. Patch the resource to persist changes

Deleted resource

1. If the resource has a Machine owner
   1. Perform deletion of provider-specific machine infrastructure
   2. If this is a control plane machine, deregister the instance from the provider’s control plane load balancer (optional)
   3. If any errors are encountered, exit the reconciliation
2. Remove the provider-specific finalizer from the resource
3. Patch the resource to persist changes

RBAC

Provider controller

A machine infrastructure provider must have RBAC permissions for the types it defines. If you are using kubebuilder to generate new API types, these permissions should be configured for you automatically. For example, the AWS provider has the following configuration for its AWSMachine type:

// +kubebuilder:rbac:groups=infrastructure.cluster.x-k8s.io,resources=awsmachines,verbs=get;list;watch;create;update;patch;delete
// +kubebuilder:rbac:groups=infrastructure.cluster.x-k8s.io,resources=awsmachines/status,verbs=get;update;patch

A machine infrastructure provider may also need RBAC permissions for other types, such as Cluster and Machine. If you need read-only access, you can limit the permissions to get, list, and watch. You can use the following configuration for retrieving Cluster and Machine resources:

// +kubebuilder:rbac:groups=cluster.x-k8s.io,resources=clusters;clusters/status,verbs=get;list;watch
// +kubebuilder:rbac:groups=cluster.x-k8s.io,resources=machines;machines/status,verbs=get;list;watch

Cluster API controllers

The Cluster API controller for Machine resources is configured with full read/write RBAC permissions for all resources in the infrastructure.cluster.x-k8s.io API group. This group represents all machine infrastructure providers for SIG Cluster Lifecycle-sponsored provider subprojects. If you are writing a provider not sponsored by the SIG, you must grant full read/write RBAC permissions for the “infrastructure machine” resource in your API group to the Cluster API manager’s ServiceAccount. ClusterRoles can be granted using the aggregation label cluster.x-k8s.io/aggregate-to-manager: "true". The following is an example ClusterRole for a FooMachine resource:

apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  name: capi-foo-machines
  labels:
    cluster.x-k8s.io/aggregate-to-manager: "true"
rules:
- apiGroups:
  - infrastructure.foo.com
  resources:
  - foomachines
  verbs:
  - create
  - delete
  - get
  - list
  - patch
  - update
  - watch

Note, the write permissions allow the Machine controller to set owner references and labels on the “infrastructure machine” resources; they are not used for general mutations of these resources.

Bootstrap Provider Specification

Overview

A bootstrap provider generates bootstrap data that is used to bootstrap a Kubernetes node.

Data Types

Bootstrap API resource

A bootstrap provider must define an API type for bootstrap resources. The type:

1. Must belong to an API group served by the Kubernetes apiserver
2. May be implemented as a CustomResourceDefinition, or as part of an aggregated apiserver
3. Must be namespace-scoped
4. Must have the standard Kubernetes “type metadata” and “object metadata”
5. Should have a spec field containing fields relevant to the bootstrap provider
6. Must have a status field with the following:
   1. Required fields:
      1. ready (boolean): indicates the bootstrap data has been generated and is ready
      2. dataSecretName (string): the name of the secret that stores the generated bootstrap data
   2. Optional fields:
      1. failureReason (string): indicates there is a fatal problem reconciling the bootstrap data; meant to be suitable for programmatic interpretation
      2. failureMessage (string): indicates there is a fatal problem reconciling the bootstrap data; meant to be a more descriptive value than failureReason

Note: because the dataSecretName is part of status, this value must be deterministically recreatable from the data in the Cluster, Machine, and/or bootstrap resource. If the name is randomly generated, it is not always possible to move the resource and its associated secret from one management cluster to another.

BootstrapTemplate Resources

For a given Bootstrap resource, you should also add a corresponding BootstrapTemplate resource:

// PhippyBootstrapConfigTemplateSpec defines the desired state of PhippyBootstrapConfigTemplate.
type PhippyBootstrapConfigTemplateSpec struct {
	Template PhippyBootstrapTemplateResource `json:"template"`
}

// +kubebuilder:object:root=true
// +kubebuilder:resource:path=phippybootstrapconfigtemplates,scope=Namespaced,categories=cluster-api,shortName=pbct
// +kubebuilder:storageversion

// PhippyBootstrapConfigTemplate is the Schema for the Phippy Bootstrap API.
type PhippyBootstrapConfigTemplate struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`

	Spec PhippyBootstrapConfigTemplateSpec `json:"spec,omitempty"`
}

type PhippyBootstrapConfigTemplateResource struct {
	Spec PhippyBootstrapConfigSpec `json:"spec"`
}

List Resources

For any resource, also add list resources, e.g.

//+kubebuilder:object:root=true

// PhippyBootstrapConfigList contains a list of Phippy Bootstrap Configurations.
type PhippyBootstrapConfigList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []PhippyBootstrapConfig `json:"items"`
}

//+kubebuilder:object:root=true

// PhippyBootstrapConfigTemplateList contains a list of PhippyBootstrapConfigTemplate.
type PhippyBootstrapConfigTemplateList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []PhippyBootstrapConfigTemplate `json:"items"`
}

Bootstrap Secret

The Secret containing bootstrap data must:

1. Use the API resource’s status.dataSecretName for its name
2. Have the label cluster.x-k8s.io/cluster-name set to the name of the cluster
3. Have a controller owner reference to the API resource
4. Have a single key, value, containing the bootstrap data

Behavior

A bootstrap provider must respond to changes to its bootstrap resources. This process is typically called reconciliation. The provider must watch for new, updated, and deleted resources and respond accordingly.

The following diagram shows the typical logic for a bootstrap provider:

1. If the resource does not have a Machine owner, exit the reconciliation
   1. The Cluster API Machine reconciler populates this based on the value in the Machine‘s spec.bootstrap.configRef field.
2. If the resource has status.failureReason or status.failureMessage set, exit the reconciliation
3. If the Cluster to which this resource belongs cannot be found, exit the reconciliation
4. Deterministically generate the name for the bootstrap data secret
5. Try to retrieve the Secret with the name from the previous step
   1. If it does not exist, generate bootstrap data and create the Secret
6. Set status.dataSecretName to the generated name
7. Set status.ready to true
8. Patch the resource to persist changes

Sentinel File

A bootstrap provider’s bootstrap data must create /run/cluster-api/bootstrap-success.complete (or C:\run\cluster-api\bootstrap-success.complete for Windows machines) upon successful bootstrapping of a Kubernetes node. This allows infrastructure providers to detect and act on bootstrap failures.

RBAC

Provider controller

A bootstrap provider must have RBAC permissions for the types it defines, as well as the bootstrap data Secret resources it manages. If you are using kubebuilder to generate new API types, these permissions should be configured for you automatically. For example, the Kubeadm bootstrap provider the following configuration for its KubeadmConfig type:

// +kubebuilder:rbac:groups=bootstrap.cluster.x-k8s.io,resources=kubeadmconfigs;kubeadmconfigs/status,verbs=get;list;watch;create;update;patch;delete
// +kubebuilder:rbac:groups="",resources=secrets,verbs=get;list;watch;create;update;patch;delete

A bootstrap provider may also need RBAC permissions for other types, such as Cluster. If you need read-only access, you can limit the permissions to get, list, and watch. The following configuration can be used for retrieving Cluster resources:

// +kubebuilder:rbac:groups=cluster.x-k8s.io,resources=clusters;clusters/status,verbs=get;list;watch

Cluster API controllers

The Cluster API controller for Machine resources is configured with full read/write RBAC permissions for all resources in the bootstrap.cluster.x-k8s.io API group. This group represents all bootstrap providers for SIG Cluster Lifecycle-sponsored provider subprojects. If you are writing a provider not sponsored by the SIG, you must add new RBAC permissions for the Cluster API manager-role role, granting it full read/write access to the bootstrap resource in your API group.

Note, the write permissions allow the Machine controller to set owner references and labels on the bootstrap resources; they are not used for general mutations of these resources.

Overview

In order to demonstrate how to develop a new Cluster API provider we will use kubebuilder to create an example provider. For more information on kubebuilder and CRDs in general we highly recommend reading the Kubebuilder Book. Much of the information here was adapted directly from it.

This is an infrastructure provider - tasked with managing provider-specific resources for clusters and machines. There are also bootstrap providers, which turn machines into Kubernetes nodes.